1. Ifihan
This manual provides instructions for the installation, operation, and maintenance of your AXA Blueline Steady LED bicycle tail light. The Blueline Steady is designed for pannier rack mounting and features a parking light function, providing enhanced visibility and safety for cyclists.
This product complies with German certification marks and includes 2 LEDs for optimal light output.
2. Alaye Aabo
- Always ensure the tail light is securely mounted before riding. A loose light can fall off and cause damage or injury.
- Maṣe wo taara sinu ina LED when it is active, as it may cause temporary vision impairment.
- Keep the light clean to ensure maximum visibility. Dirt or mud can reduce light output.
- This product is not water resistant. Avoid prolonged exposure to heavy rain or submersion in water to prevent damage.
- Dispose of batteries responsibly gẹgẹ bi awọn ilana agbegbe.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn paati wa ninu package:
- 1 x AXA Blueline Steady LED Rear Pannier Light
Note: Mounting hardware may be sold separately or included with your bicycle's pannier rack.
4. Eto ati fifi sori
4.1 Mounting the Tail Light
The AXA Blueline Steady is designed for mounting on a bicycle pannier rack. It features a screw spacing of 50 mm.
- Ṣe idanimọ Awọn aaye Igbesoke: Locate the two mounting holes on your bicycle's pannier rack, typically at the rear, with a 50 mm distance between them.
- Gbe Imọlẹ naa si: Align the mounting holes on the back of the Blueline Steady tail light with the holes on your pannier rack.
- Ni aabo pẹlu awọn skru: Insert appropriate screws (not included) through the light and into the pannier rack. Tighten the screws firmly but do not overtighten, as this may damage the light housing.
- Jẹrisi Iduroṣinṣin: Gently tug on the light to ensure it is securely attached and does not wobble.
Image: Blueline Steady Tail Light Mounting Points
This image illustrates the rear of the AXA Blueline Steady tail light, highlighting the two circular screw holes positioned 50mm apart, designed for secure attachment to a bicycle's pannier rack.
4.2 Battery Installation (if applicable)
The Blueline Steady is battery-powered. Ensure batteries are correctly installed before first use.
- Ṣii Iyẹwu Batiri: Locate the battery compartment cover on the light. Use a small screwdriver or coin to open it if necessary.
- Fi awọn batiri sii: Insert the required batteries (e.g., AAA, not included) according to the polarity indicators (+/-) inside the compartment.
- Iyẹwu Timọ: Ni aabo pa ideri kompaktimenti batiri ni aabo.
5. Awọn ilana Iṣiṣẹ
5.1 Titan / Pa a
The AXA Blueline Steady typically operates automatically or via a simple switch, depending on the specific model variant. Consult the light's housing for a power button or sensor.
- Isẹ aladaaṣe: Some models are designed to turn on automatically when motion is detected or in low light conditions.
- Isẹ afọwọṣe: If a button is present, press it once to turn the light on. Press it again to turn it off.
5.2 Parking Light Function
The Blueline Steady features a parking light function that keeps the light active for approximately 4 minutes after the bicycle stops. This enhances safety when pausing at traffic lights or during short stops.
- The parking light function activates automatically when the main light is on and the bicycle comes to a stop.
- The light will remain illuminated at a reduced intensity for about 4 minutes, or until the bicycle resumes motion.
6. Itọju
- Ninu: Nu lẹnsi ati ile ina naa pẹlu asọ rirọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- Rirọpo Batiri: When the light dims or stops functioning, replace the batteries. Refer to Section 4.2 for battery installation.
- Ibi ipamọ: If storing the bicycle for an extended period, remove the batteries from the tail light to prevent leakage and damage.
- Ayewo: Periodically check the mounting screws for tightness and ensure the light is free from cracks or damage.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | Awọn batiri ti o ku tabi ti ko tọ ti fi sori ẹrọ. | Ropo awọn batiri, aridaju ti o tọ polarity. |
| Imọlẹ jẹ baibai. | Low battery power; dirty lens. | Replace batteries; clean the lens. |
| Ina flickers. | Loose battery connection; low battery power. | Check battery contacts; replace batteries. |
| Iṣẹ́ iná páàkì kò ṣiṣẹ́. | Main light not active; internal sensor issue. | Ensure main light is on. If problem persists, contact support. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | Blueline Steady |
| Nọmba apakan | 03112406 |
| Imọlẹ Iru | LED Ru Light |
| Nọmba ti LED | 2 |
| Imọlẹ | 50 Lumens (Maximum Light Output) |
| Iye Imọ́lẹ̀ Páàkì | Isunmọ. 4 iṣẹju |
| Iṣagbesori Iru | Pannier Rack Mount |
| Skru Aye | 50 mm |
| Orisun agbara | Agbara Batiri |
| Ohun elo | Ṣiṣu |
| Àwọ̀ | Dudu |
| Iwọn Nkan | 0.04 kilo |
| Omi Resistance Ipele | Not Water Resistant (IPX4 rating) |
9. Atilẹyin ọja ati Support
For warranty information, technical support, or any questions regarding your AXA Blueline Steady tail light, please contact AXA customer service or visit the official AXA webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
10. Media Information
No product images or videos were provided in the available data for this manual.
