Ọrọ Iṣaaju
This manual provides essential information for the proper installation, operation, and maintenance of your Sherwood S-5000II Tuner. Please read this manual thoroughly before using the unit to ensure safe and optimal performance. Retain this manual for future reference.
Image: Cover of the Sherwood S-5000II Tuner Instruction Manual. This image displays the title and model number, indicating the specific product this guide pertains to.
Awọn iṣọra Aabo
Observe the following safety guidelines to prevent electric shock, fire, or damage to the unit:
- Ma ṣe fi ẹrọ naa han si ojo tabi ọrinrin.
- Maṣe ṣii minisita. Tọkasi iṣẹ si oṣiṣẹ ti o peye nikan.
- Rii daju pe fentilesonu to dara; maṣe dina awọn ṣiṣi atẹgun.
- Lo nikan awọn pàtó kan ipese agbara voltage.
- Disconnect the power cord from the wall outlet if the unit will be unused for a long period.
Ṣeto
Ṣiṣi silẹ
Carefully remove the tuner from its packaging. Retain all packing materials for future transport or storage.
Ipo
Place the tuner on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibration. Ensure adequate space around the unit for proper ventilation.
Awọn isopọ
- Asopọmọra Antenna: Connect your FM antenna to the FM antenna terminals and your AM antenna to the AM antenna terminals on the rear panel. For optimal FM reception, a 75-ohm coaxial cable is recommended.
- Ijade ohun: Connect the audio output jacks (RCA L/R) of the S-5000II to the corresponding input jacks (e.g., 'Tuner In' or 'Aux In') on your amplifier tabi olugba lilo awọn okun RCA.
- Asopọ agbara: Ensure all audio connections are secure before plugging the power cord into an AC wall outlet.
Awọn ilana Iṣiṣẹ
Titan / Paa
Press the POWER button on the front panel to turn the unit on or off. The power indicator light will illuminate when the unit is on.
Tuning to a Station
- Yan Ẹgbẹ: Use the AM/FM selector switch to choose between AM or FM broadcast bands.
- Tun: Rotate the TUNING knob to scan for desired radio stations. The tuning meter will indicate signal strength.
- Itanran Tun: For FM, observe the 'FM STEREO' indicator. If it illuminates, the station is broadcasting in stereo. Adjust the tuning slightly for the clearest signal and best stereo separation.
Iṣakoso iwọn didun
The S-5000II is a tuner and does not have its own volume control. Adjust the volume using your connected amplifier tabi olugba.
Itoju
Ninu
Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish. Ensure the unit is powered off and unplugged before cleaning.
Afẹfẹ
Periodically check that the ventilation openings on the top and sides of the unit are free from dust and obstructions. Blocked vents can lead to overheating.
Ibi ipamọ
If storing the unit for an extended period, disconnect it from power, clean it, and place it in its original packaging or a protective cover in a dry, cool environment.
Laasigbotitusita
Ṣaaju ki o to kan si iṣẹ, jọwọ ṣayẹwo awọn ọran ti o wọpọ wọnyi:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Okun agbara ko sopọ; Odi iṣan ko ṣiṣẹ | Ensure power cord is securely plugged in; Test wall outlet with another device |
| Ko si ohun | Àwọn okùn ohùn kò sopọ̀ mọ́ ara wọn; Amplifier input ko yan; Amplifier volume too low | Check RCA cable connections; Select correct input on amplifier; Increase ampiwọn didun lifier |
| Poor reception (FM/AM) | Antenna not connected or poorly positioned; Interference | Connect antenna securely; Adjust antenna position for better signal; Move unit away from other electronic devices |
| FM Stereo indicator not lighting up | Station not broadcasting in stereo; Weak stereo signal | Tune to a known stereo station; Adjust antenna for stronger signal |
Awọn pato
Akiyesi: Awọn alaye ni o wa labẹ iyipada laisi akiyesi.
- Awoṣe: S-5000II
- Iru: AM/FM Stereo Tuner
- Iwọn Igbohunsafẹfẹ:
- FM: 88-108 MHz
- AM: 530-1600 kHz
- Idagbasoke Antenna:
- FM: 75 Ohm (unbalanced), 300 Ohm (balanced)
- AM: Built-in loop antenna, external terminal
- Awọn ibeere Agbara: AC 120V, 60Hz (or as specified for region)
- Awọn iwọn (W x H x D): Isunmọ 16.5 x 5.5 x 12 inches (420 x 140 x 305 mm)
- Ìwúwo: Isunmọ 15 lbs (6.8 kg)
Alaye atilẹyin ọja
This Sherwood S-5000II Tuner is typically covered by a limited warranty from the original date of purchase. The specific terms and duration of the warranty may vary depending on the region and retailer. Please refer to your purchase documentation or contact your dealer for detailed warranty information. The warranty generally covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
Onibara Support
For technical assistance, service, or inquiries regarding your Sherwood S-5000II Tuner, please contact your authorized Sherwood dealer or the customer support department in your region. When contacting support, please have your model number (S-5000II) and a detailed description of the issue ready. You may also find additional resources and contact information on the official Sherwood webojula.
