Itọsọna olumulo

1. Ifihan

O ṣeun fun riraasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

Nọmba 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. Alaye Aabo pataki

IKILO: Ewu ti ina mọnamọna. Ge asopọ agbara ni apoti fiusi tabi fifọ Circuit ṣaaju fifi sori ẹrọ tabi iṣẹ.

• Ka gbogbo awọn itọnisọna ni pẹkipẹki ṣaaju ki o to bẹrẹ fifi sori ẹrọ.
• Gbogbo asopọ ina gbọdọ wa ni ibamu pẹlu awọn koodu agbegbe, awọn ilana, tabi Koodu Ina Orilẹ-ede (NEC). Kan si oniṣẹ ina ti o peye ti o ba jẹ pe o ko mọ awọn asopọ ina to tọ.
• Use only UL-listed wire connectors for the electrical connections.
• Maṣe kọja wat ti o pọjutage specified for this fixture (14 Watts per bulb).
• Wear safety glasses and appropriate protective gear during installation.
• Rii daju pe imuduro ti wa ni ilẹ daradara.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• Ohun èlò ìfipamọ́ (àwọn skru, àwọn èèpo wáyà, àmì ìfipamọ́)
• Note: Light bulbs are NOT included.

4. Awọn pato

5. Eto ati fifi sori

Awọn irinṣẹ ti a beere: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

Awọn Igbesẹ Iṣaaju Iṣaaju:

1. Pa agbara: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. Ṣetan agbegbe naa: Clear the work area and ensure you have stable footing if using a ladder.
3. Yọọ kuro: Carefully remove the fixture and all components from the packaging.

Awọn igbesẹ fifi sori ẹrọ:

1. So akọmọ iṣagbesori: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. So Awọn onirin Itanna:
   • Sopọ awọn dudu (hot) wire from the ceiling to the dudu wire of the fixture using a wire nut.
   • Sopọ awọn funfun (neutral) wire from the ceiling to the funfun wire of the fixture using a wire nut.
   • Sopọ awọn ilẹ wire (bare copper or green) from the ceiling to the ilẹ wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. Secure Fixture to Mounting Bracket: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. Fi Awọn Isusu Imọlẹ sori ẹrọ: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. So iboji gilasi: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. Pada Agbara pada: Nígbà tí a bá ti parí ìfìsílẹ̀ àti gbogbo ìsopọ̀mọ́ra, dá agbára padà sí ibi tí ẹ̀rọ ìfọ́mọ́ra náà ti ń ṣiṣẹ́.

6. Awọn ilana Iṣiṣẹ

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. Itọju ati Itọju

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• Fífọ ohun èlò náà: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• Rirọpo Boolubu: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage ati iru ipilẹ.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú ohun èlò ìmọ́lẹ̀ rẹ, wo àwọn ìṣòro àti ìdáhùn tó wọ́pọ̀ wọ̀nyí:

• Imọlẹ ko tan:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• Imọlẹ flickers:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

9. Atilẹyin ọja ati Onibara Support

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website or the contact information provided in your product packaging. Please have your model number (40804) and purchase details ready when contacting support.