ABAC Pole Position 24 Litre Air Compressor User Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.

The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.

Awọn Itọsọna Aabo

Always observe the following safety precautions to prevent personal injury or damage to the compressor:

• Rii daju pe a gbe konpireso sori iduro, ipele ipele.
• Ma ṣe ṣiṣẹ konpireso ni tutu tabi damp awọn ipo.
• Wear appropriate personal protective equipment (PPE), such as eye protection and hearing protection.
• Before any maintenance or inspection, disconnect the compressor from the power supply and ensure the tank is fully depressurized.
• Maṣe ṣe taara afẹfẹ fisinuirindigbindigbin si eniyan tabi ẹranko.
• Pa awọn ọmọde ati awọn eniyan laigba aṣẹ kuro ni agbegbe iṣẹ.
• Regularly check all connections and hoses for leaks or damage.

Irinše Loriview

• Air ojò: Stores compressed air (24 litres capacity).
• Apejọ Mọto ati Pump: Generates compressed air.
• Àwọn Òṣùwọ̀n Ìfúnpá: Display tank pressure and regulated outlet pressure.
• Olutọsọna titẹ: Ṣe àtúnṣe titẹ afẹfẹ ti o wu jade.
• Quick Connect Coupler: For attaching air tools and hoses.
• Sisan Ikun: Ti wa ni isalẹ ojò naa fun fifa omi kuro ninu omi.
• Awọn kẹkẹ ati Imudani: Fun irọrun gbigbe ti ẹrọ naa.

Ṣeto

1. Ṣiṣii ati Ṣiṣayẹwo: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
2. Àkójọpọ̀ (tí ó bá jẹ́ dandan): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
3. Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
4. Ibi: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
5. Asopọmọra itanna: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.

Awọn ilana Iṣiṣẹ

1. Bíbẹ̀rẹ̀ kọ̀mpútà:
   • Ensure the drain valve at the bottom of the tank is closed.
   • Plug the compressor into the power outlet.
   • Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
2. Ṣíṣàtúnṣe Ìfúnpá Ìjáde:
   • Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
   • Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
3. Nsopọ Awọn irinṣẹ afẹfẹ:
   • Attach your air hose to the quick connect coupler.
   • Connect your air tool to the other end of the hose.
4. Tiipa:
   • Flip the ON/OFF switch to the 'OFF' position.
   • Yọ compressor kuro lati inu ibudo agbara.
   • Depressurize any air remaining in the hose and tool.
5. Imudanu Sisọ: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.

Itoju

Itọju deedee n ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati igba pipẹ ti compressor rẹ.

• Ojoojumọ:
  • Sisan condensation lati awọn air ojò.
  • Check oil level (if applicable, for oil-lubricated models).
• Weekly/Every 10 Hours of Use:
  • Inspect air filter for dirt and debris. Clean or replace if necessary.
  • Ṣayẹwo fun eyikeyi awọn ariwo dani tabi awọn gbigbọn.
• Monthly/Every 50 Hours of Use:
  • Inspect all fasteners for tightness.
  • Check safety valve operation (briefly pull the ring to ensure it releases air).
• Annually/Every 200 Hours of Use:
  • Change compressor oil (if applicable).
  • Inspect pressure switch and gauges for proper function.
• Ibi ipamọ: When storing the compressor for extended periods, ensure the tank is drained of all moisture and store in a dry, protected area.

Laasigbotitusita

If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.

Awọn pato

Atilẹyin ọja ati Support

ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC webojula.

For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.

O le ri alaye siwaju sii ati olubasọrọ awọn alaye lori awọn ABAC Store on Amazon.