Ìwé Ìtọ́sọ́nà Olùlò Fóònù Onípele-pupọ Cisco IP Phone 8861

1. Ifihan

The Cisco IP Phone 8861 with Multi-Platform Phone firmware is designed to enhance personal productivity in the workplace through its robust and user-friendly features. This office phone offers an ergonomic design, wideband audio for clear voice communications, reliable operation, and encrypted voice communications for enhanced security.

Figure 1: Cisco IP Phone 8861 device overview.

2. Key Awọn ẹya ara ẹrọ

• Optimized for Cisco Webex Calling: Ẹrọ yii jẹ iṣapeye fun Sisiko WebMofi Npe. Sisiko kan Webex subscription must be purchased separately.
• Awọn bọtini iṣẹ ti o wa titi: Provides one-touch access to essential features such as service, messaging, directory, hold/resume, transfer, and conference.
• Eto ni kikun: Line keys can be configured to support directory numbers or call features like speed dialing.
• Iṣe Ti o dara julọ: Features Class 2 Power over Ethernet (PoE) and a built-in Gigabit Ethernet switch for PC connection.
• Ibamu: Integrates with various industry-leading call control platforms, which may require additional licenses or services.

3. Package Awọn akoonu

Jẹrisi pe package rẹ ni awọn nkan wọnyi ninu:

• Cisco IP Phone 8861 (CP-8861-3PW-NA-K9=)
• Handset and coiled cord
• okun àjọlò
• Awọn iwe aṣẹ

4. Eto

1. So foonu pọ: Pulọọgi opin kan ti okun foonu ti a fi sinu ibudo imudani lori ipilẹ foonu ati opin miiran sinu foonu.
2. Sopọ si Nẹtiwọọki: Connect an Ethernet cable from your network switch or router to the network port on the back of the phone. If using Power over Ethernet (PoE), the phone will power on automatically.
3. Sopọ si PC (Aṣayan): If you wish to connect a PC through the phone, use another Ethernet cable to connect your PC to the PC port on the back of the phone.
4. Sopọ Agbara (ti ko ba lo PoE): If PoE is not available, connect an optional power adapter (sold separately) to the power port on the phone and then to a power outlet.
5. Ibẹrẹ ibẹrẹ: The phone will power on and begin its boot sequence. This may take a few minutes as it connects to the network and registers with your call control system.
6. Iṣeto: Follow any on-screen prompts or consult your system administrator for specific network and account configurations.

5. Awọn ilana Iṣiṣẹ

5.1 Ṣiṣe ati gbigba awọn ipe

• Lati Ṣe Ipe: Lift the handset, press the speaker button, or press a line button. Dial the number using the keypad.
• Lati Dahun Ipe kan: Lift the handset, press the speaker button, or press the flashing line button.
• Lati Pari Ipe kan: Replace the handset or press the End Call button.

5.2 Awọn bọtini iṣẹ ti o wa titi

The phone features dedicated buttons for common functions:

• Iṣẹ: Access various phone services.
• Fifiranṣẹ: Access voicemail or message indicators.
• Itọsọna: Access corporate or personal directories.
• Duro/Tẹ bẹrẹ: Gbe ipe lọwọ si idaduro tabi bẹrẹ ipe ti o waye.
• Gbe: Gbe ipe lọwọ lọ si ẹgbẹ miiran.
• Apejọ: Bẹrẹ ipe apejọ kan.

5.3 Awọn bọtini Laini Eto

The buttons alongside the display are programmable line keys. They can be configured by your system administrator to function as:

• Additional phone lines (directory numbers).
• Speed dial buttons for frequently called numbers.
• Access to specific call features.

5.4 Iṣakoso iwọn didun

Use the volume up (+) and volume down (-) buttons to adjust the volume of the handset, headset, or speakerphone during a call, or the ringer volume when the phone is idle.

5.5 Agbekọri Lilo

The phone supports a headset for hands-free communication. Connect your headset to the dedicated headset port. Press the headset button to activate/deactivate headset mode. Note that a headset is sold separately.

5.6 Miiran Awọn iṣẹ

• Pa ẹnu mọ́: Tẹ bọtini Mute lati da gbohungbohun rẹ duro nigba ipe kan. Tẹ lẹẹkansi lati da ipalọlọ kuro.
• Agbọrọsọ: Press the Speaker button to use the speakerphone. Press again to turn off the speakerphone.
• Titun: Access your call history and redial previous numbers.
• Awọn igbasilẹ: Access and manage call recordings (if enabled by your system administrator).
• Group Calling: Utilize features for group calls as configured by your system.

6. Itọju

• Ninu: Use a soft, dry cloth to clean the phone's exterior. Avoid abrasive cleaners or solvents.
• Ayika: Keep the phone in a dry environment, away from direct sunlight and extreme temperatures.
• Awọn kebulu: Rii daju pe gbogbo awọn kebulu ti sopọ ni aabo ati pe wọn ko pin tabi bajẹ.

7. Laasigbotitusita

7.1 No Dial Tone

• Check all cable connections, especially the Ethernet cable to the network port.
• Ensure the phone is receiving power (either via PoE or power adapter).
• Contact your system administrator if the issue persists.

7.2 Cannot Make or Receive Calls

• Verify the phone is registered with your call control system (check the display for status messages).
• Ensure your network connection is active.
• Confirm that your account is active and has calling privileges.
• Contact your system administrator for assistance.

7.3 Ko dara Audio Didara

• Ṣayẹwo foonu ati awọn asopọ agbekari.
• Ṣatunṣe iwọn didun nipa lilo awọn bọtini iwọn didun.
• Rí i dájú pé kò sí ìdènà láti ọ̀dọ̀ àwọn ẹ̀rọ itanna mìíràn.
• Verify network quality and bandwidth.

8. Awọn pato

Brand:

Sisiko

Nọmba awoṣe:

CP-8861-3PW-NA-K9=

Ìwọ̀n Nkan:

5.1 iwon

Awọn iwọn idii:

14.92 x 12.64 x 4.72 inches

Àwọ̀:

Dudu, Grẹy

Iru foonu:

IP foonu

Orisun Agbara:

Okun Itanna

Iru olupe:

Keypad Nikan

Idahun Iru eto:

Oni-nọmba

Awọn ẹrọ ibaramu:

Mobile devices, Cisco Webex Calling, other call control platforms

Agbara Ipe Alapejọ:

2 ọna

Isẹ-pupọ:

Iṣẹ́ Onírúurú Ìlà

Idanimọ olupe:

Bẹẹni

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your product or visit the official Cisco support website. Specific warranty terms may vary by region and reseller.