1. Ifihan
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Gbogbogbo Abo ilana
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Aabo Agbegbe Iṣẹ: Jẹ ki agbegbe iṣẹ jẹ mimọ ati itanna daradara. Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba. Ma ṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi ina, gaasi, tabi eruku.
- Aabo Itanna: Yago fun olubasọrọ ara pẹlu ilẹ tabi ilẹ roboto bi paipu, imooru, awọn sakani, ati firiji. Ewu ti o pọ si ti mọnamọna ina mọnamọna ti ara rẹ ba wa ni ilẹ tabi ti ilẹ.
- Aabo ti ara ẹni: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Lilo ati Itọju: Má ṣe fipá mú ohun èlò agbára náà. Lo ohun èlò agbára tó tọ́ fún ohun èlò rẹ. Yóò ṣe iṣẹ́ náà dáadáa àti pé yóò dáàbò bò ó ní ìwọ̀n tí a ṣe é fún. Yọ batiri náà kúrò nínú ohun èlò agbára náà kí o tó ṣe àtúnṣe èyíkéyìí, yí àwọn ohun èlò mìíràn padà, tàbí kí o fi àwọn ohun èlò agbára pamọ́.
- Lilo ati Itọju Batiri: Gba agbara nikan pẹlu ṣaja pato nipasẹ olupese. Ṣaja ti o dara fun iru idii batiri kan le ṣẹda eewu ina nigba lilo pẹlu idii batiri miiran. Lo awọn irinṣẹ agbara nikan pẹlu awọn idii batiri ti a pinnu pataki.
3. Ọja Ipariview ati Awọn ẹya ara ẹrọ
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Ijade Torque giga: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Iṣakoso Iyara Ayipada: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Imọlẹ LED ti a ṣepọ: Three power LEDs provide optimal illumination of the work area.
- Apẹrẹ Ergonomic: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Ikole ti o tọ: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Agekuru igbanu: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Eto
4.1 Fifi sori batiri (Batiri ati Ṣaja Ti a Ta Lọtọ)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- Lati yọ batiri kuro, tẹ bọtini itusilẹ (awọn) ni awọn ẹgbẹ ti idii batiri naa ki o si rọra yọ jade.
Ìfilọ́lẹ̀ àti Ìyọkúrò 4.2 Bit
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Awọn ilana Iṣiṣẹ
5.1 Agbara Titan / Pa ati Iṣakoso Iyara
- Lati bẹrẹ: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Titunṣe Iyara: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Lati Duro: Tu TAN/PA yipada.
5.2 Ìtọ́sọ́nà Ìyípo
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Yiyi Siwaju (Yíwọ sinu): Push the selector switch to the left.
- Yiyi Yiyi pada (Yíyọ Jade): Push the selector switch to the right.
- Ipò Títì: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Itọju
Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti awakọ ipa rẹ.
- Ninu: Lẹ́yìn lílo kọ̀ọ̀kan, fọ ilé ohun èlò náà pẹ̀lú aṣọ rírọ, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Ibi ipamọ: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Ayewo: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Irinṣẹ ko bẹrẹ. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Agbara ti o dinku tabi iṣẹ ṣiṣe. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Bit ko dani ni aabo. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Einhell |
| Nọmba awoṣe | TE-CI 18/1 Li Solo (4510034) |
| Orisun agbara | Battery Powered (18V Power X-Change) |
| Iyara Yiyipo ti o pọju | 2300 RPM |
| O pọju Torque | 140 Newton Mita |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 Volts |
| Iwọn Nkan | kilo 1.18 (2.58 poun) |
| Ọja Mefa | 7.8"L x 3.03"W x 6.65"H |
| Ohun elo | Rubber, Aluminium |
| Awọn irinše to wa | Akku-Schlagschrauber (Impact Driver Body Only) |
| Awọn batiri To wa? | Rara |
| Ti beere awọn batiri? | Yes (18V Lithium Ion) |
9. Atilẹyin ọja ati Support
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webojula.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
