1. Eto ati Apejọ
This Serta office chair requires assembly. Please follow the steps below carefully to ensure proper and safe setup. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
Awọn Igbesẹ Apejọ:
- So Casters si Ipilẹ: Insert each caster into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
- Fi Gas Gbe soke: Place the large end of the gas lift cylinder into the center hole of the assembled five-star base.
- So Armrests to Ijoko: Secure the armrests to the underside of the seat cushion using the provided screws. Ensure the armrests are oriented correctly (left and right).
- So Backrest to Ijoko: Align the backrest with the seat cushion and secure it using the provided screws. Do not overtighten.
- So Mechanism mọ ijoko: Fasten the seat plate mechanism to the underside of the seat cushion, ensuring the front of the mechanism faces the front of the seat.
- So Apejọ Ijoko pọ si Igbesoke Gaasi: Fi ìjókòó àti ẹ̀yìn tí a tò jọ sí orí sílíńdà gáàsì, kí o sì rí i dájú pé ihò àárín ẹ̀rọ náà bá orí gáàsì gáàsì mu. Tẹ̀ ẹ́ mọ́lẹ̀ dáadáa láti lè dì í mú.
This image displays the Serta office chair in its fully assembled state, featuring black and grey upholstered sections, padded armrests, and a five-star base with casters.
2. Awọn ilana Iṣiṣẹ
Familiarize yourself with the chair's adjustable features to optimize your comfort and support.
Awọn atunṣe ijoko:
- Atunse Giga: To raise the chair, lift the lever located on the right side of the seat while taking your weight off the seat. To lower the chair, lift the lever while seated. Release the lever at the desired height.
- Iṣẹ́ Títẹ̀/Rírìrì: Pull the same lever (on the right side) outwards to enable the rocking motion of the chair. Push the lever inwards to lock the chair in an upright position.
- Títúnṣe Ẹ̀dọ̀fóró Tẹ̀: The round knob located underneath the front of the seat controls the tension of the tilt mechanism. Turn the knob clockwise to increase tilt tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
3. Itọju ati Itọju
Regular maintenance helps prolong the life and appearance of your Serta office chair.
Ninu ati Itọju:
- Ìfọṣọfọ: For general cleaning, wipe the upholstered surfaces with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild upholstery cleaner according to its instructions, testing on an inconspicuous area first.
- Fireemu ati Ipilẹ: Wipe metal and plastic parts with a soft, damp asọ. Yago fun abrasive ose.
- Awọn ohun mimu: Lorekore ṣayẹwo gbogbo awọn skru ati awọn boluti lati rii daju pe wọn ṣinṣin. Retighten ti o ba wulo lati ṣetọju iduroṣinṣin.
- Awọn Casters: Keep casters free of hair and debris to ensure smooth rolling. Clean with a small brush or vacuum cleaner as needed.
4. Laasigbotitusita
Ti o ba pade eyikeyi awọn ọran pẹlu alaga rẹ, tọka si awọn iṣoro ati awọn solusan ti o wọpọ atẹle wọnyi.
Awọn ọrọ to wọpọ:
- Chair will not adjust height:
- Rí i dájú pé ìfàgùn tí ó wà ní ìpele gíga náà ti ṣiṣẹ́ dáadáa.
- Check if the gas lift cylinder is properly seated in the base and mechanism.
- Chair wobbles or feels unstable:
- Rí i dájú pé gbogbo àwọn skru ìsopọ̀ ni a ti mú dáadáa.
- Rii daju pe awọn simẹnti ti wa ni kikun fi sii sinu ipilẹ.
- Casters ko yiyi laisiyonu:
- Ṣe àyẹ̀wò àwọn ohun èlò ìdọ̀tí tí ó wà nínú ihò náà fún àwọn ìdọ̀tí tí ó wà nínú rẹ̀ (irun, àwọ̀ ara, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ) kí o sì fọ̀ wọ́n dáadáa.
- Ensure casters are correctly installed and not damaged.
5. Awọn pato
Key technical details and dimensions for the Serta Office Chair B076CKDB27.
- Nọmba awoṣe: B076CKDB27
- Okunfa Fọọmu: Ti gbega
- Apejọ ti a beere: Bẹẹni
- Approximate Overall Height: 42 inches
- Approximate Seat Width: 19.8 inches
- Approximate Base Width: 25.8 inches
This image illustrates the key dimensions of the Serta office chair. The overall height is approximately 42 inches, the seat width is 19.8 inches, and the width of the five-star base is 25.8 inches.
6. atilẹyin ọja Information
This Serta office chair is covered by a limited warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty terms and duration may vary. For detailed warranty information, please refer to the documentation included with your purchase or contact customer support.
7. Onibara Support
For further assistance, replacement parts, or any questions not covered in this manual, please contact Serta customer support. Contact details can typically be found on the product packaging or the official Serta webojula.
Atilẹyin Ayelujara: Visit the official Serta webaaye fun FAQs ati awọn orisun atilẹyin.
Atilẹyin foonu: Refer to your product packaging for the customer service phone number.
