1. Ọja Ipariview
The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.
Aworan 1.1: Iwaju view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.
2. Key Awọn ẹya ara ẹrọ
- Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
- Iṣafihan Ẹya sọfitiwia: Shows the software version upon startup.
- Iboju Afẹyinti: The display illuminates for 10 seconds after activation for improved visibility.
- Heating/Cooling Indicator: Clearly displays the current operating mode.
- Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
- Setback Temperature Display: Shows the active setback temperature.
- Aṣayan Iwọn otutu: Yipada laarin Celsius ati Fahrenheit.
- Ifihan Ipo Batiri: Indicates the status of any internal backup battery or connected sensor batteries.
- Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
- Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.
3. Imọ ni pato
| Brand | Lori |
| Nọmba awoṣe | 1086974 |
| Àwọ̀ | Funfun (RAL 9016) |
| Awọn iwọn (H x W x D) | 80 x 80 x 26.5 mm |
| Iwọn Nkan | 120 giramu |
| Ibi ti ina elekitiriki ti nwa | 4-wire bus (Wired) |
| Voltage | 24 Volts |
| Asopọmọra Technology | Ti firanṣẹ |
| Kilasi Idaabobo | IP30 |
| Ibamu | CE |
| Adarí Iru | Iṣakoso Afowoyi |
| Iwọn Iṣakoso Iru | Oni-nọmba |
| Awọn Lilo pato | Underfloor Alapapo |
| Awọn irinše to wa | Room thermostat and mounting hardware |
4. Alaye Aabo
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Aabo Itanna: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
- Awọn ipo Ayika: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
- Lilo ti a pinnu: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
- Ninu: Lo asọ asọ ti o gbẹ fun mimọ. Ma ṣe lo abrasive ose tabi epo.
5. Fifi sori ẹrọ ati Oṣo
The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.
5.1 Iṣagbesori
- Ge asopọ agbara: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
- Aṣayan Ibi: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
- Asopọmọra: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
- Iṣagbesori to ni aabo: Use the provided mounting hardware to securely attach the thermostat to the wall.
5.2 Ni ibẹrẹ Oṣo
- Agbara Tan: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
- Software Version Check: Upon initial power-up, the software version will briefly display.
- Ẹka ìwọ̀ntúnwọ̀nsì: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
- Iṣeto sensọ: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.
6. Isẹ
The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.
6.1 Ṣiṣeto iwọn otutu
- Rotate the central dial clockwise to increase the desired temperature.
- Rotate the central dial counter-clockwise to decrease the desired temperature.
- The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.
6.2 Alaye Ifihan
- Iwọn otutu lọwọlọwọ: The main display shows the current room temperature.
- Ṣeto iwọn otutu: Briefly displayed when adjusting the dial.
- Ipo Iṣiṣẹ: An icon or text indicates if the system is currently heating or cooling.
- Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
- Ipo Batiri: Displays the status of any internal backup battery or connected sensor batteries.
6.3 Changing Temperature Units (Celsius/Fahrenheit)
Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.
7. Itọju
The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.
- Ninu: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
- Ṣayẹwo sensọ: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
- Ṣayẹwo eto: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.
8. Laasigbotitusita
If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan naa ṣofo tabi ko dahun. | No power to the thermostat or control module. | Check the main power supply and circuit breaker. Ensure the 4-wire bus connection is secure. |
| Iwọn otutu ti ko tọ. | Ipo iwọn otutu ti o kan nipasẹ awọn iyaworan, oorun taara, tabi awọn orisun ooru. | Relocate the thermostat if possible, or shield it from interfering elements. Ensure no external sensors are faulty or obstructed. |
| Alapapo / itutu eto ko fesi. | Communication issue with Smatrix Base X-145 control module or system fault. | Verify the 4-wire bus connection. Check the Smatrix Base X-145 control module for error indicators. Consult the Smatrix Base X-145 manual for system-level troubleshooting. |
| Setback function not working as expected. | Incorrect configuration in the Smatrix Base X-145 control module. | Review the setback schedule and settings within the Smatrix Base X-145 control module. |
If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.
9. Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Olupese: Lori
Nọmba awoṣe: 1086974
ASIN: B077CLZPJ8
