1. Ọja Ipariview
The Waveshare 7-inch HDMI LCD (H) is a versatile capacitive touch screen monitor featuring a 1024x600 IPS display with a toughened glass cover. Designed for broad compatibility, it supports various single-board computers and systems, offering a responsive and clear visual interface.
Awọn ẹya pataki:
- 7-inch IPS Ifihan: Ó fúnni ní àǹfààní tó gbòòrò viewing angle and vibrant colors.
- 1024x600 Resolution: Offers clear and crisp visuals.
- Fọwọkan Capacitive: Supports 5-point touch (driver-free for most supported systems).
- Toughened Glass Cover: Enhances durability and protection.
- Ibamu gbooro: Works with Raspberry Pi (all versions), Jetson Nano, PCs (Windows 10/8.1/8/7), and various game consoles (Xbox360, PS4, Switch).
- Iṣẹ́ tí kò ní jẹ́ awakọ̀: Plug-and-play functionality for many supported operating systems.
2. Package Awọn akoonu
Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- 1x 7-inch HDMI LCD (H) Monitor
- 2x Brackets (for stand)
- 1x HDMI USB
- 1x Okun USB-A sí Okun Iru-C
- 1x Mini HDMI to HDMI Adapter
- 2x Gun skru
- 4x Copper Screws
- 4x Awọn skru Kukuru
- 1x Screwdriver
- 1x Itọsọna olumulo
3. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Iboju ifihan | 7 inches |
| Panel Iru | IPS |
| Fọwọkan Iru | 5-point Capacitive Touch |
| Ipinnu | 1024 x 600 |
| Imọlẹ | 420 cd/m² |
| Viewigun igun | 170° (H) / 170° (V) |
| Oṣuwọn sọtun | 60Hz |
| Ni wiwo | HDMI, Type-C, 3.5mm Audio |
| Iṣagbewọle Voltage | 5V |
| Agbára Àpapọ̀ (Púpọ̀ jùlọ) | 2.55W |
| Awọn iwọn otutu ti nṣiṣẹ | -20°C ~ 60°C |
| Ibi ipamọ otutu | -30°C ~ 70°C |
| Iwọn Ọja | 0.9 lbs (10.6 iwon) |
| Screen Dimensions (L×W×D) | 165x102x15mm (6.5x4.0x0.6 in) |
| Display Area (L×W) | 154x86mm |
| Awọn ọna ṣiṣe atilẹyin | Windows 11/10/8.1/8/7, Raspbian, Ubuntu, Kodi |
4. Eto ati fifi sori
4.1 So awọn iduro
- Carefully remove the protective film from the included stand brackets.
- Align the brackets with the screw holes on the back of the monitor.
- Secure the brackets using the provided long screws and screwdriver. Do not overtighten.
4.2 Raspberry Pi Connection Setup
To ensure proper functionality with Raspberry Pi, specific configuration changes are required:
- Insert your Raspberry Pi's SD card into a computer.
- Ṣii awọn
config.txtfile located in the root directory of the SD card. - Add the following lines at the end of the file:
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0If you are using the official Raspberry Pi OS (2021-10-30), change:
dtoverlay=vc4-kms-v3d
to:
#dtoverlay=vc4-kms-v3d- Save the changes and safely eject the SD card.
- Insert the SD card back into your Raspberry Pi.
- Connect the HDMI and TOUCH interfaces of the monitor to the Raspberry Pi's card.
- Power up the Raspberry Pi, and the display and touch functionality should work properly.
4.3 PC Connection Setup
For PC connection, set the resolution according to the instructions in the manual. If using dual monitors, configure the primary and secondary screens, and adjust the resolution for each monitor accordingly.
5. Ṣiṣẹ Atẹle
5.1 Lori-iboju Ifihan (OSD) Akojọ aṣyn
The monitor features tactile buttons on the back for navigating the OSD menu. These buttons allow you to adjust various display settings.
- Akojọ: Press to open the main menu, then press again to enter a sub-menu.
- Left/Up: Navigate left/up in the menu, or decrease values.
- Right/Down: Navigate right/down in the menu, or increase values.
- Pada: Exit the current menu or return to the previous menu.
- Agbara: Tan-an/pa ifihan naa.
5.2 Fọwọkan Iṣakoso
The capacitive touch screen supports up to 5-points touch, depending on the operating system. This allows for intuitive interaction with compatible devices.
6. Itọju
Lati rii daju igbesi aye gigun ati iṣẹ to dara julọ ti atẹle rẹ, tẹle awọn itọnisọna itọju wọnyi:
- Ninu: Use a soft, dry cloth to clean the external housing. For the screen, use a soft cloth slightly dampened pẹlu omi tabi a ti kii-abrasive iboju regede. Yẹra fun awọn kẹmika lile.
- Mimu: Avoid dropping the monitor or subjecting it to strong impacts. Do not place heavy objects on the screen.
- Ayika: Keep the monitor in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
7. Laasigbotitusita
- Monitor is not powering on: Ensure the power cable is properly plugged into the Raspberry Pi and the included USB-A to C cable is securely connected between the board and the display.
- Image is reversed: The monitor does not support image flip.
- Touch functionality not working: Make sure the USB-A to C cable is connected between the Raspberry Pi board and the display, directly from the display to the power socket.
- No signal on display: Ensure the HDMI cable is properly connected between the Raspberry Pi board and the display. If using a mini HDMI port, make sure to use the included mini HDMI to HDMI adapter.
- Awọn ọna ṣiṣe ni atilẹyin: Windows 11/10/8.1/7, Raspbian, Ubuntu, Kodi.
- Using with PS3/PS4/Xbox One/Xbox 360: Yes, please use the HDMI port.
- Power source shut off, monitor not turning back on: If the monitor will come back on, or do you have to press the button.
- Ko si ohun: This monitor has no built-in speakers. For sound output, connect external speakers via the 3.5mm audio jack.
8. Atilẹyin ọja ati Support
The product comes with a 12-month warranty for quality-related issues. You can return any undamaged product within 12 months for a refund or replacement. Shipping costs and import duties/taxes are not included in the refund/replacement process.
Ibi iwifunni:
- Webojula: www.eyoyousa.com
- Imeeli: support@eyoyomonitor.com
- Tẹli: 909-317-8588 (9:00AM-5:00PM; Monday-Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
9. Media Gallery
Awọn aworan ọja
