Murray EQ500X Self-Propelled Petrol Lawn Mower User Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Murray EQ500X Self-Propelled Petrol Lawn Mower. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Murray EQ500X is a 46 cm self-propelled petrol lawn mower equipped with a reliable Briggs & Stratton 575EX Series 140 cm³ engine. It offers 4-in-1 functionality: collecting, rear discharge, side discharge, and mulching.

Alaye Aabo

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep children and bystanders away from the operating area. Wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and sturdy footwear.

Awọn ofin Aabo Gbogbogbo:

• Read the entire manual before operating the mower.
• Never operate the mower without the grass catcher or discharge guard in place.
• Má ṣe lo ẹ̀rọ ìgé igi ní koríko tàbí òjò.
• Always turn off the engine and disconnect the spark plug wire before cleaning, servicing, or unclogging the chute.
• Refuel outdoors only, and do not smoke while refueling.
• Store fuel in an approved container in a cool, well-ventilated area.

Apejọ ati Oṣo

Your Murray EQ500X lawn mower requires some assembly before first use. Follow these steps carefully.

Ṣii silẹ:

• Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
• Check for any damage during shipping. Contact your dealer if any parts are damaged or missing.
• Retain packaging materials until you are satisfied with the product.

Mu Apejọ:

Attach the upper handle to the lower handle using the provided bolts and knobs. Ensure the handle is securely fastened and comfortable for operation. The handle has 3 adjustment positions.

Image: The Murray EQ500X lawn mower with its handle fully extended and assembled, ready for use. This view shows the ergonomic soft grip handle and the overall profile of the mower.

Fifi epo ẹ́ńjìnnì kún un:

The engine is shipped without oil. Before starting, add 0.5 liters of SAE30 4-stroke engine oil (not included). Locate the oil fill cap/dipstick on the engine. Fill slowly to the 'FULL' mark on the dipstick. Do not overfill.

Fifi epo kun:

Fill the fuel tank with fresh, clean unleaded petrol. The fuel tank capacity is 0.8 liters. Do not overfill. Always refuel in a well-ventilated area away from ignition sources.

Aworan: A sunmọ-soke view of the Briggs & Stratton 575EX Series engine on the Murray EQ500X lawn mower, showing the oil fill cap and fuel tank cap. This engine is known for its reliability and ease of starting.

So Apeja Koriko naa:

Lift the rear discharge flap and hook the grass catcher onto the mower chassis. Ensure it is securely attached to prevent grass clippings from escaping.

Image: The Murray EQ500X lawn mower with the 60-liter grass catcher attached to the rear, demonstrating its collection capability. The catcher is designed for easy removal and emptying.

Awọn ilana Iṣiṣẹ

Bibẹrẹ ẹrọ naa:

1. Rii daju pe okun waya sipaki ti sopọ ni aabo.
2. Push the primer bulb (if equipped) 3-5 times.
3. Hold the operator presence control bar against the handle.
4. Pull the starter rope with a brisk, continuous motion until the engine starts.

Ṣiṣatunṣe Giga Gige:

The cutting height can be centrally adjusted to 6 positions, ranging from 28 mm to 92 mm. Locate the single-point lever near the wheels and move it to the desired height setting.

Aworan: A alaye view of the cutting height adjustment lever on the Murray EQ500X, showing its ergonomic design and the range of height settings available. This allows for quick and easy adjustment of the cutting deck.

Gbigbe Ti ara ẹni:

To engage the self-propel function, squeeze the drive control bar against the handle. Release the bar to disengage the drive.

Mowing Tips:

• Gé koríko gbígbẹ fún àbájáde tó dára jùlọ.
• Dá àwọn ìdìpọ̀ gígé pọ̀ díẹ̀ kí ó lè rí i dájú pé wọ́n bò ó déédé.
• Do not attempt to cut too much grass at once; adjust height accordingly.
• For mulching, ensure the mulch plug is inserted and the grass catcher is removed.
• For side discharge, attach the side discharge chute and remove the grass catcher.

Itoju

Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti odan moa rẹ.

Lẹhin lilo kọọkan:

• Clean the underside of the cutting deck to prevent grass buildup. The mower features a wash port for easy cleaning.
• Sofo awọn koriko apeja.
• Inspect the blade for sharpness and damage.

Image: The underside of the Murray EQ500X lawn mower deck, showing the cutting blade and the robust steel construction. Regular cleaning of this area is crucial for efficient mowing.

Itọju Ẹrọ:

• Iyipada Epo: Yí epo ẹ̀rọ padà lẹ́yìn wákàtí márùn-ún àkọ́kọ́ tí a bá ti ṣiṣẹ́, lẹ́yìn náà ní gbogbo wákàtí mẹ́ẹ̀ẹ́dọ́gbọ̀n tàbí lọ́dọọdún.
• Asẹ afẹfẹ: Fọ àlẹ̀mọ́ afẹ́fẹ́ tàbí kí o yí i padà déédéé, pàápàá jùlọ ní àwọn ibi tí eruku bá pọ̀.
• Sipaki plug: Ṣe àyẹ̀wò kí o sì nu páìpù iná náà lọ́dọọdún. Rọpò rẹ̀ tí ó bá pọndandan.

Itọju abẹfẹlẹ:

A sharp blade is essential for a clean cut. Sharpen or replace the blade as needed. Always balance the blade after sharpening to prevent vibration.

Ibi ipamọ:

Before storing for extended periods, drain the fuel tank or add a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area.

Laasigbotitusita

If problems persist after attempting these solutions, please contact an authorized service center.

Awọn pato

Akiyesi: Awọn alaye ni o wa labẹ iyipada laisi akiyesi.

Atilẹyin ọja ati Support

The Murray EQ500X lawn mower comes with a 2-year customer warrantyAtilẹyin ọja yi bo awọn abawọn ninu ohun elo ati iṣẹ-ṣiṣe labẹ lilo deede ati itọju.

For warranty claims, technical support, or to locate an authorized service center, please contact your dealer or visit the official Murray website. All Murray petrol lawn mowers are supported by the extensive Briggs & Stratton authorized dealer network.

When contacting support, please have your model number (EQ500X) and manufacturer part number (2691474) ready.