1. Ifihan
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Awọn ẹya Ọja
- Ibamu Agbaye: Controls a wide range of devices.
- Iṣẹ́ Ẹ̀kọ́ Ara-ẹni: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Awọn bọtini nla: Designed with oversized, clearly marked buttons for enhanced usability.
- Apẹrẹ Ogbon: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Eto
3.1. Fifi sori batiri
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Wa ideri iyẹwu batiri ni ẹhin isakoṣo latọna jijin.
- Gbe ideri si isalẹ tabi tẹ latch ki o gbe soke lati ṣii.
- Fi awọn batiri AAA meji sii, ni idaniloju awọn ebute rere (+) ati odi (-) ni ibamu pẹlu awọn ami ti o wa ninu yara naa.
- Rọpo ideri iyẹwu batiri, yiya pada si aaye titi yoo fi tẹ ni aabo.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Mura awọn latọna jijin: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Tẹ Ipo Ẹkọ sii: Tẹ mọlẹ AGBARA button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Yan Bọtini lati Kọ ẹkọ: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Ifihan Gbigbe: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Tun fun Awọn bọtini miiran: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Exit Learning Mode: Once all desired buttons are programmed, press the AGBARA button on the Simply remote again to exit learning mode. The indicator light will turn off.
Akiyesi: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Aworan: Iwaju view of the Simply SUPTLB001 remote control.
4. Awọn ilana Iṣiṣẹ
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Aṣayan Ẹrọ: Tẹ awọn A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Titan/Apapa: Tẹ awọn AGBARA bọtini lati tan tabi pa ẹrọ ti a yan.
- Iṣakoso iwọn didun: Lo awọn V+ button to increase volume and V- lati dinku iwọn didun.
- Program/Channel Control: Lo awọn P+ button to go to the next program/channel and P- to go to the previous program/channel.
- Iṣawọle AV: Tẹ awọn AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Itọju
- Ninu: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Rirọpo Batiri: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Ibi ipamọ: Tọju isakoṣo latọna jijin ni aaye gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Latọna jijin ko ṣiṣẹ. | Awọn batiri ti ku tabi fi sii lọna ti ko tọ. | Ropo awọn batiri pẹlu titun AAA batiri, aridaju ti o tọ polarity. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Ilọsi latọna jijin ko dara. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Awọn pato
| Brand | Awọn Itanna Itanna Giga |
| Orukọ awoṣe | Nikan |
| Nọmba awoṣe | SUPTLB001 |
| Àwọ̀ | Dudu |
| Asopọmọra Technology | Infrared (IR) Learning Function |
| Awọn ẹrọ ibaramu | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Nọmba ti Awọn bọtini | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Batiri Iru | 2 x AAA (not rechargeable) |
| Ibiti o pọju | Mita 10 (isunmọ 33 ẹsẹ) |
| Awọn iwọn (Itosi.) | 16.5 cm (Ipari) x 4.5 cm (Iwọn) |
Aworan: Apa view of the remote control with approximate dimensions.
8. Atilẹyin ọja ati Support
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of ọdun meji 2 lati ọjọ ti o ra.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun ijẹrisi atilẹyin ọja.
