1. Ifihan
The Einhell GE-SP 3046 RB is a versatile multi-function pump designed for efficient rainwater collection and drainage. Its robust construction and intelligent features make it ideal for various applications around the home and garden, such as emptying rain barrels, tanks, or small ponds, and transferring water for irrigation. This manual will guide you through the proper use and care of your pump.
Figure 1.1: Einhell GE-SP 3046 RB Multi-function Pump with Accessories.
2. Awọn ilana aabo
Always read and follow all safety instructions before operating the pump.
- Rii daju pe ipese agbara ibaamu voltage tí a sọ ní orí àmì ìdíyelé fifa omi náà.
- Never operate the pump with a damaged power cable or plug. Have any damage repaired by a qualified electrician.
- Má ṣe gbé páàpù náà sókè tàbí gbé e pẹ̀lú okùn agbára rẹ̀.
- Pa awọn ọmọde ati awọn eniyan laigba aṣẹ kuro ni agbegbe iṣẹ.
- Ma ṣe fifa awọn olomi ti o le gbin, ibajẹ, tabi awọn ibẹjadi.
- Ensure the pump is fully submerged in water during operation to prevent dry running and overheating.
- Disconnect the pump from the power supply before performing any maintenance, cleaning, or when not in use.
- Dabobo fifa soke lati Frost.
3. Ọja irinše
The Einhell GE-SP 3046 RB pump comes with several key components for its multi-functional use:
- Ẹka fifa: The main submersible pump with integrated motor and power cable.
- Yiyi leefofo loju omi: Automatically activates/deactivates the pump based on water level.
- Gooseneck to rọ: Allows for precise water discharge direction.
- Adjustable Aluminum Tube: Provides variable height for water extraction, especially from deep containers.
- Rain Stand: A stable base for positioning the pump and extension tube in rain barrels.
- Integrated Cable Rewind: Convenient storage for the power cable on the pump housing.
- Extension Tube Storage: Dedicated compartment on the pump housing for storing extension tubes.
Figure 3.1: Close-up of the Pump Unit.
Figure 3.2: Flexible Gooseneck.
Figure 3.3: Extension Tube Storage.
4. Eto
Follow these steps to set up your Einhell pump for operation:
- Assemble the Extension: If using the pump for rainwater collection from a barrel, attach the adjustable aluminum tube to the pump's outlet. Then, connect the flexible gooseneck to the top of the aluminum tube.
- Gbe fifa soke: Place the pump unit into the water source (e.g., rain barrel, tank, or flooded area). Ensure the pump is stable and fully submerged. The minimum operating space required is approximately 40 x 40 cm, with a pump diameter of 24 cm.
- Adjust the Float Switch: The float switch controls the automatic on/off function of the pump. Adjust its position along the cable to set the desired minimum and maximum water levels for operation. A higher float position will require more water to activate the pump.
- Sopọ si Agbara: Plug the pump's power cable into a properly grounded electrical outlet. Ensure the outlet is protected by a residual current device (RCD) for safety.
Figure 4.1: Minimum Operating Space.
Figure 4.2: Adjusting the Float Switch.
5. Ṣiṣẹ
Once set up, the Einhell GE-SP 3046 RB pump operates efficiently:
- Isẹ aladaaṣe: The pump will automatically start when the water level rises to the activation point set by the float switch and stop when the water level drops below the deactivation point.
- Isẹ afọwọṣe: For continuous operation regardless of water level (e.g., for complete drainage), the float switch can often be fixed in an 'on' position. Refer to the specific instructions for your float switch model.
- Water Transfer: Direct the flexible gooseneck or connected hose to where you want the water to be discharged. The pump can deliver up to 4,600 liters per hour with a maximum delivery height of 11 meters.
Figure 5.1: Pump in use for rainwater collection.
6. Itọju
Itọju deedee ṣe idaniloju pe fifa rẹ yoo pẹ to ati pe yoo ṣiṣẹ daradara julọ:
- Ninu: After each use, especially when pumping dirty water, rinse the pump with clean water. Remove any debris or foreign objects from the intake area at the bottom of the pump.
- Ṣayẹwo fun Awọn idena: Periodically inspect the pump's intake and outlet for any blockages that could impede water flow.
- Ayẹwo USB: Regularly check the power cable for any signs of wear, cuts, or damage.
- Ibi ipamọ igba otutu: Kí òtútù àkọ́kọ́ tó dé, da omi gbogbo nù pátápátá kí ó má baà dì. Tọ́jú pọ́ọ̀pù náà sí ibi gbígbẹ tí kò ní yìnyín.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Pump ko bẹrẹ | Ko si ipese agbara Float switch not activated Motor apọju / overheated | Ṣayẹwo asopọ agbara ati fiusi Adjust float switch position or manually activate Disconnect power, let cool down, check for blockages |
| Iwọn sisan kekere | Partial blockage in intake/outlet Hose kinked or too long/narrow Aini ipele omi | Clean intake and outlet Check hose for kinks, use appropriate diameter Ensure pump is adequately submerged |
| Fifa gbalaye continuously | Switifu omi ti di ipo 'on' Water level not dropping below deactivation point | Check float switch for free movement Ensure proper float switch adjustment for deactivation |
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | GE-SP 3046 RB |
| Abala Nọmba | 4170438 |
| Agbara | 350 W |
| Voltage | 230 V |
| Max. Sisan oṣuwọn | 4,600 L/h (4.6 Litres per second) |
| O pọju. Ifijiṣẹ Giga | 11 m |
| Max. Impurity Size | 2.5 mm |
| USB Ipari | 10 m |
| Ohun elo | Impact-resistant PVC Plastic |
| Iwọn | 3.8 kg |
| Awọn iwọn (L x W x H) | 17 x 23 x 51 cm |
9. Atilẹyin ọja ati Support
Einhell products are manufactured with high-quality materials and undergo strict quality controls. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Keep your purchase receipt as proof of purchase.
