Ìwé Ìtọ́sọ́nà Olùlò Fírísà T-19F Reach-In TRUE T-19F

1. Ifihan

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your TRUE T-19F Reach-In Freezer. Please read this manual thoroughly before installing or operating the unit and retain it for future reference. The TRUE T-19F is a commercial-grade, single-door upright freezer designed for reliable frozen food storage.

Nọmba 1: Iwaju view of the TRUE T-19F Reach-In Freezer, showcasing its stainless steel exterior and single door with a handle.

2. Alaye Aabo

Always observe basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury.

• Aabo Itanna: Ensure the freezer is connected to a properly grounded 115 Volt, dedicated electrical outlet. Do not use extension cords or adapter plugs.
• Afẹfẹ: Maintain adequate clearance around the unit for proper ventilation to prevent overheating. Refer to installation guidelines for specific distances.
• Mimu: The unit is heavy. Use appropriate lifting techniques and equipment during unpacking and placement to avoid injury.
• Awọn ohun elo ina: Ma ṣe tọju awọn nkan ibẹjadi tabi awọn ohun elo ina sinu tabi nitosi firisa.
• Awọn ọmọde: Keep children away from the appliance. Ensure the door cannot be accidentally closed on a child.

3. Unpacking ati fifi sori

3.1 Ṣiṣii silẹ

1. Fi ìṣọ́ra yọ gbogbo ohun èlò ìdìpọ̀, títí kan teepu àti fíìmù ààbò kúrò.
2. Inspect the freezer for any shipping damage. Report any damage immediately to the carrier and your supplier.
3. Yọ gbogbo ohun èlò ìkójọ àti àwọn ohun èlò mìíràn kúrò nínú rẹ̀.

3.2 Ibi

• Place the freezer on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate air circulation. Maintain a minimum of 3 inches (7.6 cm) clearance from walls or other equipment on the sides and rear, and 6 inches (15.2 cm) on top.
• Avoid direct sunlight or proximity to heat-generating appliances (e.g., ovens, stoves).

3.3 Caster fifi sori

The unit comes with free casters for mobility. Install them securely into the designated sockets at the bottom of the freezer. Ensure all casters are locked once the unit is in its final position to prevent accidental movement.

3.4 Itanna Asopọ

Connect the freezer to a dedicated 115 Volt, 60 Hz, single-phase AC power supply with a proper ground. Do not overload the circuit. Allow the unit to stand for at least 2 hours after moving before plugging it in to allow compressor oils to settle.

4. Isẹ

4.1 Ibẹrẹ Ibẹrẹ

After connecting to power, the freezer will begin to cool. Allow the unit to operate empty for several hours (e.g., 4-6 hours) to reach its set temperature before loading with products.

4.2 otutu Iṣakoso

The freezer is equipped with a factory-set temperature control. Refer to the control panel for adjustments. Typically, commercial freezers operate at -10°F (-23°C) to 0°F (-18°C). Adjust the thermostat incrementally and allow time for the temperature to stabilize.

4.3 Ikojọpọ firisa

• Distribute products evenly on the three adjustable vinyl-coated wire shelves.
• Do not block the air vents inside the freezer, as this can impede air circulation and cooling efficiency.
• Yago fun overloading selifu ju won àdánù agbara.

4.4 enu isẹ

The single door is self-closing to minimize temperature fluctuations and energy consumption. Ensure the door closes completely after each use. The door is also equipped with locks for security.

Nọmba 2: Inu ilohunsoke view of the TRUE T-19F freezer, showing the adjustable wire shelves and interior lighting.

5. Itọju ati Cleaning

5.1 Deede Cleaning

• Inu inu: Clean the interior regularly with a mild soap and water solution. Rinse thoroughly and dry. Do not use abrasive cleaners or sharp objects.
• Òde: Wipe down the stainless steel exterior with a soft cloth and a non-abrasive cleaner designed for stainless steel.
• Awọn apoti ilẹkun: Clean door gaskets frequently to ensure a proper seal. Inspect for cracks or tears and replace if damaged.

5.2 Condenser Coil Cleaning

The condenser coil should be cleaned regularly (e.g., monthly or quarterly, depending on environment) to maintain optimal performance and energy efficiency. Disconnect power before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the coil fins. A dirty condenser coil can lead to reduced cooling capacity and increased energy consumption.

5.3 Defrosting

This unit features an automatic defrost system. However, if excessive ice buildup occurs, manually defrost the unit by emptying it, disconnecting power, and allowing the ice to melt. Do not use sharp objects to remove ice.

6. Laasigbotitusita

Ṣaaju ki o to kan si iṣẹ, tunview Awọn iṣoro ti o wọpọ ati awọn solusan wọnyi:

Tí ìṣòro náà bá ń bá a lọ lẹ́yìn tí a ti gbìyànjú àwọn ìdáhùn wọ̀nyí, kan sí onímọ̀ iṣẹ́ tó mọ̀ nípa rẹ̀.

7. Awọn pato

• Brand: ODODO
• Orukọ awoṣe: T-19F Reach in Freezer
• Nọmba apakan: 675-215-RT
• Iru fifi sori ẹrọ: Sisun
• Agbara: 19 Kú. Ft.
• Voltage: 115 Volts
• Awọn ilẹkun ilẹkun: Ọtun
• Awọn ibi ipamọ: 3, adjustable vinyl coated wire
• Àwọ̀: Fadaka
• Ijẹrisi: de ọdọ

8. Atilẹyin ọja ati Support

For warranty information, please refer to the separate warranty document provided with your purchase or visit the official TRUE website. For technical support, parts, or service inquiries, please contact TRUE customer service or an authorized service provider. Ensure you have your model number (T-19F) and serial number ready when contacting support.

You can find more information about TRUE products and support at the TRUE Store on Amazon.