StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Awoṣe: RKCONS1901 | Brand: StarTech.com

1. Ifihan

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Ohun ti o wa ninu Apoti

  • KVM console
  • 6 ft [1.8 m] KVM cable
  • M5 eso ẹyẹ
  • Awọn skru M5

3. Eto ati fifi sori

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 agbeko iṣagbesori

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Nsopọ Awọn okun

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Ẹyìn view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

olusin 2: Ẹyìn view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Awọn ilana Iṣiṣẹ

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Lilo Keyboard ati Touchpad

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 OSD Akojọ Lilọ kiri

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Itọju

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Ninu: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Afẹfẹ: Ensure proper airflow around the console. Do not block ventilation openings.
  • Iṣakoso USB: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Awọn ipo Ayika: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Laasigbotitusita

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Ko si Ifihan: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Keyboard/Asin Ko Dahun: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Ìpinnu Ìfihàn Tí Kò Tọ́: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Awọn pato

Ẹya ara ẹrọSipesifikesonu
Nọmba awoṣeRKCONS1901
BrandStarTech.com
agbeko Giga1U
Iwọn Ifihan19 inches
Ifihan IruActive Matrix TFT LCD
Ipinnu Max1280x1024
Keyboard99-key full keyboard with numeric keypad
Ntokasi DeviceBọtini ifọwọkan
Atọka fidioVGA
USB SupportBẹẹni
Awọn iwọn otutu ti nṣiṣẹ0 si 40 iwọn Celsius
MTBFwakati meji 50,000
Awọn iwọn Ọja (LxWxH)21 x 19 x 1.7 inches
Iwọn Nkan26.8 iwon

8. Atilẹyin ọja ati Support

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.

Awọn iwe aṣẹ ti o jọmọ - RKCONS1901

Ṣaajuview StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD - User Manual
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
Ṣaajuview StarTech.com 8-Port Rackmount KVM Switch - Ìwé Ìtọ́sọ́nà Olùlò 4K 60Hz
Ìwé ìtọ́ni fún StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH 8-Port Rackmount KVM Switch. Ó fún wa ní àwọn ìtọ́ni tó kún rẹ́rẹ́ lórí bí a ṣe lè fi sori ẹ̀rọ, bí a ṣe lè so àwọn kọ́ǹpútà àti kọ̀ǹpútà pọ̀, àti bí a ṣe lè lo àwọn àṣẹ hotkey fún iṣẹ́ 4K 60Hz.
Ṣaajuview StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch pẹlu OSD Olumulo Afowoyi
Ìwé ìtọ́ni yìí fún àwọn olùlò ní àlàyé kíkún lórí StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch pẹ̀lú OSD, títí kan fífi sori ẹrọ, ìṣiṣẹ́, àwọn ìlànà pàtó, àti ìrànlọ́wọ́ ìmọ̀-ẹ̀rọ.
Ṣaajuview StarTech.com SV441DUBI / SV841DUBI 4/8-Port Oní-nọ́ńbà Ìyípadà KVM KVM Oní-nọ́ńbà pẹ̀lú File Itọsọna Olumulo Gbigbe
Ìwé ìtọ́nisọ́nà fún StarTech.com SV441DUBI àti SV841DUBI 4/8-Port Oní-nọ́ńbà Ìyípadà KVM KVM Oní-nọ́ńbà pẹ̀lú File Gbigbe. Kọ́ nípa fífi sori ẹrọ, iṣeto, iṣiṣẹ́, iṣakoso latọna jijin, ati laasigbotitusita.
Ṣaajuview StarTech.com SV231DVIUDDM & SV431DVIUDDM: Ìwé Ìtọ́sọ́nà Olùlò Ìyípadà KVM USB 2 & 4 DVI
Ìwé ìtọ́ni fún StarTech.com SV231DVIUDDM (2-port) àti SV431DVIUDDM (4-port) Àwọn ìyípadà KVM DVI USB pẹ̀lú DDM. Ó ní ìbòrí fífi sori ẹrọ, ìṣiṣẹ́, àwọn ìlànà pàtó, àwọn iṣẹ́ hot-key, ìtìlẹ́yìn ìmọ̀-ẹ̀rọ, àti ìwífún nípa àtìlẹ́yìn.
Ṣaajuview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Adjustable High Load Fixed Rackmount Shelf - Installation and Specifications
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.