HILTI VC 150-6 X Vacuum Cleaner User Manual

1. Alaye Aabo

Read all safety warnings and instructions before operating this vacuum cleaner. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Gbogbogbo Abo

• Always disconnect the power plug from the outlet before making any adjustments, changing accessories, or storing the appliance.
• Do not use the vacuum cleaner in wet conditions or to pick up flammable or combustible liquids.
• Jeki irun, aṣọ alaimuṣinṣin, awọn ika ọwọ, ati gbogbo awọn ẹya ara kuro lati awọn ṣiṣi ati awọn ẹya gbigbe.
• Maṣe gbe ohunkohun ti o njo tabi ti nmu siga, gẹgẹbi awọn siga, awọn ere-kere, tabi eeru gbigbona.
• Lo nikan gẹgẹbi a ti ṣalaye ninu itọnisọna yii. Lo awọn asomọ iṣeduro olupese nikan.
• Ma ṣe lo pẹlu okun ti o bajẹ tabi plug. Ti ohun elo ko ba ṣiṣẹ bi o ti yẹ, ti lọ silẹ, bajẹ, fi silẹ ni ita, tabi sọ sinu omi, da pada si ile-iṣẹ iṣẹ kan.
• Ma ṣe fa tabi gbe nipasẹ okun, lo okun bi imudani, ti ilẹkun kan lori okun, tabi fa okun ni ayika awọn egbegbe to mu tabi igun. Maṣe fi ohun elo ṣiṣẹ lori okun. Jeki okun kuro lati awọn aaye ti o gbona.

2. Ọja Ipariview

The HILTI VC 150-6 X is a robust corded electric vacuum cleaner designed for various cleaning tasks on surfaces such as carpet, hard floor, rugs, and bare floors. It features a 6-gallon capacity and is equipped with a push-button controller and touch control for ease of use.

Image 1: HILTI VC 150-6 X Vacuum Cleaner. This image displays the main vacuum unit, including its wheels, dust container, and the attached hose with a nozzle.

Awọn ẹya pataki:

• Awoṣe: VC 150-6 X
• Nọmba Nkan: 2167146
• Agbara: 6 galonu
• Iṣakoso: Push Button Controller, Touch Control
• Gbigbe: 4 Wheels for easy maneuverability
• Awọn oriṣi Ajọ: Cartridge, Disk, Foam, HEPA Filter (depending on configuration/accessories)

3. Eto

Follow these steps to prepare your HILTI VC 150-6 X for first use.

Ṣiṣi silẹ

1. Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
2. Check for any damage during transit. If any damage is found, contact your HILTI service representative.
3. Ensure all listed components are present: main unit, hose, extension wands, floor nozzle, crevice tool, and filters.

Apejọ

1. So Awọn kẹkẹ: If not pre-assembled, securely attach the four wheels to the base of the vacuum cleaner.
2. Fi Ajọ sori ẹrọ: Open the vacuum cleaner's lid/housing. Insert the appropriate filter (e.g., HEPA filter, foam filter) into its designated slot. Ensure it is seated correctly to prevent dust leakage.
3. Sopọ okun: Securely attach the flexible hose to the suction inlet on the main unit. Ensure a tight connection.
4. So Awọn ẹya ara ẹrọ: Connect the desired extension wands and floor nozzle or other attachments to the end of the hose.

Asopọ agbara

Connect the power cord to a suitable electrical outlet (120V). Ensure the outlet is properly grounded.

4. Awọn ilana Iṣiṣẹ

This section details how to operate your HILTI VC 150-6 X Vacuum Cleaner effectively.

Bibẹrẹ Isenkanjade Igbale

1. Ensure the vacuum cleaner is properly assembled and connected to a power source.
2. Press the power button on the control panel. The vacuum cleaner will start.
3. Use the touch control interface to adjust suction power or switch between modes if available.

Igbale Italolobo

• For optimal cleaning, move the floor nozzle slowly over the surface.
• Use the appropriate attachment for the surface being cleaned (e.g., floor nozzle for large areas, crevice tool for tight spaces).
• Regularly check the dust container and empty it before it becomes full to maintain suction performance.
• Avoid vacuuming large, sharp objects that could damage the hose or internal components.

Stopping the Vacuum Cleaner

Press the power button again to turn off the vacuum cleaner. Disconnect the power cord from the outlet after use.

5. Itọju

Regular maintenance ensures the longevity and optimal performance of your HILTI VC 150-6 X.

Ṣofo Apoti Eruku

1. Rí i dájú pé a ti pa ẹ̀rọ ìfọṣọ náà, a sì ti yọ ọ́ kúrò.
2. Release the latches securing the motor head to the dust container.
3. Carefully lift the motor head off.
4. Empty the contents of the dust container into a waste receptacle.
5. Wipe the inside of the container with a damp asọ ti o ba wulo.
6. Reassemble the unit, ensuring the latches are securely fastened.

Filter Cleaning ati Rirọpo

The VC 150-6 X uses various filter types including Cartridge, Disk, Foam, and HEPA filters. Refer to your specific filter type for cleaning instructions.

• HEPA/Cartridge Filters: Tap gently to dislodge dust. Do not wash unless specified by the manufacturer. Replace every 6-12 months or when suction noticeably decreases.
• Foam Filters: Can often be rinsed with water. Allow to air dry completely before reinstallation.
• Always ensure filters are completely dry before reinserting them into the vacuum cleaner.

Gbogbogbo Cleaning

Mu ese ita ti ẹrọ igbale kuro pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.

6. Laasigbotitusita

This section provides solutions to common issues you might encounter with your HILTI VC 150-6 X.

7. Awọn pato

Detailed technical specifications for the HILTI VC 150-6 X Vacuum Cleaner.

8. Atilẹyin ọja ati Support

For warranty information, technical support, or service inquiries regarding your HILTI VC 150-6 X Vacuum Cleaner, please contact HILTI customer service directly.

Refer to your purchase documentation or the official HILTI website for specific warranty terms and contact details in your region.

Òṣìṣẹ́ HILTI Webojula: www.hilti.com