Michelin 12294A Digital Programmable Tire Pressure Gauge

Ọrọ Iṣaaju

Thank you for choosing the Michelin 12294A Digital Programmable Tire Pressure Gauge. This device is designed for accurate and convenient measurement of tire pressure, ensuring optimal vehicle performance and safety. Please read this manual thoroughly before use.

Package Awọn akoonu

• 1 x Michelin 12294A Digital Programmable Tire Pressure Gauge
• 2 x Lithium-metal batteries (pre-installed or included)

Image: The Michelin 12294A Digital Programmable Tire Pressure Gauge, showing its digital display and control buttons.

Ṣeto

Fifi sori batiri

The device requires 2 Lithium-metal batteries. These are typically included or pre-installed. If replacement is needed:

1. Locate the battery compartment cover, usually on the back or side of the unit.
2. Ṣii ideri.
3. Fi awọn batiri sii, ni idaniloju polarity ti o pe (+/-).
4. Pa ideri batiri naa ni aabo.

Titan / Pipa agbara

• Lati mu agbara ṣiṣẹ, tẹ bọtini naa Bọtini agbara (often marked with a circle and vertical line symbol).
• The backlit LCD display will illuminate.
• Ẹrọ naa yoo pa a laifọwọyi lẹhin akoko aiṣiṣẹ lati tọju igbesi aye batiri.

Awọn ilana Iṣiṣẹ

Idiwọn Tire Ipa

1. Ensure the tire is cold for the most accurate reading.
2. Yọ àtọwọdá fila lati taya.
3. Press the nozzle of the gauge firmly onto the tire valve stem. A good seal is crucial for an accurate reading.
4. The digital display will show the tire pressure.
5. Remove the gauge from the valve stem. The reading will hold on the display for a short period.
6. Rọpo àtọwọdá fila.

Image: The Michelin 12294A gauge being used to measure pressure on a car tire valve.

Yiyipada Awọn iwọn wiwọn

The gauge supports measurements in PSI, KPA, BAR, and kg/cm². To cycle through units, press the Bọtini kuro (often the same as the power button or a dedicated button). The current unit will be displayed on the screen.

Programming Tire Pressures

This gauge can be programmed with target front and rear tire pressures for up to two vehicles. Refer to your vehicle's owner's manual or the sticker on the driver's side door jamb for recommended tire pressures.

1. With the gauge powered on, press and hold the Bọtini eto (often an arrow button or a dedicated 'SET' button) until the programming mode is activated.
2. Lo awọn Awọn bọtini itọka oke/isalẹ to adjust the target pressure for the front tires of Vehicle 1.
3. Tẹ awọn Bọtini eto again to switch to the rear tires of Vehicle 1, then adjust.
4. Repeat the process for Vehicle 2 if desired.
5. The gauge will save the settings automatically after a few seconds of inactivity or by pressing the Program button to exit.

Aworan: A sunmọ-soke view of the gauge's digital display, showing current pressure and programmable target pressure settings.

Using the Integrated Flashlight

The gauge features an integrated flashlight to assist in locating the tire valve in low-light conditions. To activate the flashlight, press the Bọtini ina filaṣi (refer to device markings, often combined with another function or a dedicated button).

Using the Bleed Valve

If a tire is over-inflated, the built-in bleed valve allows for controlled release of air. While the gauge is attached to the valve stem and displaying pressure, gently press the Bleed Valve button (if present, often a small button near the nozzle) to release air until the desired pressure is reached.

Itoju

• Ninu: Wipe the gauge with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Ibi ipamọ: Store the gauge in a cool, dry place, away from direct sunlight and extreme temperatures.
• Rirọpo Batiri: If the display becomes dim or the device does not power on, replace the batteries. Dispose of old batteries according to local regulations.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

This Michelin product is manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Michelin automotive accessories webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.