1. Ifihan
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your LiftMaster 892LT 2-Button Remote Control Transmitter. The 892LT remote is designed to operate up to two garage door openers or gate operators, offering a convenient way to access your property. It is compatible with LiftMaster Security+ 2.0, 315 MHz, and 390 MHz systems, and replaces older models such as 972LM, 372LM, and 62LM.
Please read this manual thoroughly before attempting to program or operate the remote control to ensure proper function and safety.
Aworan 1.1: Iwaju view of the LiftMaster 892LT 2-Button Remote Control Transmitter.
2. Alaye Aabo
To reduce the risk of severe injury or death, observe the following safety precautions:
- Do not enable the garage door opener if the door is not balanced or if springs are broken.
- Máa pa àwọn ohun èlò ìdarí láti ọ̀dọ̀ àwọn ọmọdé nígbà gbogbo.
- Operate the garage door opener only when the door is in full view, free of obstructions, and the opener is properly adjusted.
- Do not allow children to play with the remote control or the garage door opener.
- This remote control is not intended for use with any garage door opener manufactured before 1993 that does not have a safety reversal system.
3. Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ninu apo rẹ:
- LiftMaster 892LT 2-Button Remote Control Transmitter
- Batiri Litiumu CR2 (ti a ti fi sori ẹrọ tẹlẹ)
- Agekuru Visor
4. Eto ati siseto
The 892LT remote control can be programmed to operate up to two different garage door openers or gate operators. Follow these steps to program your remote:
4.1. Locate the Learn Button on Your Opener
The location and color of the Learn button vary by garage door opener model. Refer to your garage door opener's manual if you cannot locate it. Common locations include the back or side panel of the motor unit.
Image 4.1: The 892LT remote supports Security+ 2.0 technology for enhanced security.
4.2. Awọn Igbesẹ siseto
- Press and Release the Learn Button: On your garage door opener, press and immediately release the Learn button. The Learn LED on the opener will glow steadily for 30 seconds.
- Press and Hold the Remote Button: Within 30 seconds, press and hold the button on your 892LT remote control that you wish to program.
- Tu Bọtini Latọna jijin silẹ: Tú bọ́tìnì latọna jijin sílẹ̀ nígbà tí iná ìṣí ilẹ̀kùn gáréèjì bá tàn tàbí tí a bá gbọ́ ìtẹ̀ méjì. Èyí fi hàn pé a ti ṣe ètò latọna jijin náà dáadáa.
- Idanwo Latọna jijin: Press the programmed button on your remote control. The garage door opener should activate.
If you are programming a second button for another opener, repeat the steps above, selecting a different button on the 892LT remote and the Learn button on the second opener.
Image 4.2: The 892LT features a multi-use design, allowing control of up to two devices.
5. Awọn ilana Iṣiṣẹ
Nígbà tí a bá ti ṣètò rẹ̀, ṣíṣiṣẹ́ ìṣàkóso latọna jijin LiftMaster 892LT rẹ rọrùn:
- To Open or Close the Door: Press the programmed button on your remote control. The garage door or gate will begin to move.
- To Stop the Door: Press the programmed button again while the door is in motion.
- To Reverse the Door: Ti ilẹkun ba duro laarin irin-ajo, titẹ bọtini lẹẹkansi yoo yi itọsọna rẹ pada.
Ensure you have a clear line of sight to the garage door or gate when operating the remote to prevent accidents.
6. Itọju
6.1. Batiri Rirọpo
The 892LT remote uses one CR2 lithium battery. When the battery is low, the remote's range may decrease, or the LED indicator may not light up consistently.
- Ṣii Latọna jijin Casing: Use a small coin or screwdriver to gently pry open the remote control casing.
- Yọ Batiri atijọ kuro: Fi ìṣọ́ra yọ batiri CR2 àtijọ́ náà kúrò.
- Fi Batiri Tuntun sii: Fi batiri CR2 titun sii pẹlu ẹgbẹ rere (+) ti nkọju si oke.
- Pade Casing: Mu iṣakoso latọna jijin casing pada papọ lailewu.
6.2. Ninu
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the remote's electronics.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Remote does not activate opener. | Remote is not programmed or battery is dead. | Re-program the remote (Section 4.2). Replace the battery (Section 6.1). |
| Latọna jijin ni iwọn ti o dinku. | Batiri kekere tabi kikọlu. | Replace the battery (Section 6.1). Check for sources of interference near the opener. |
| Opener lights flash but door does not move. | Safety sensors are obstructed or misaligned. | Check and clear any obstructions from the safety sensors. Align the sensors if necessary. |
8. Awọn pato
- Awoṣe: 892LT
- Awọn bọtini: 2
- Ibamu: LiftMaster Security+ 2.0, 315 MHz, 390 MHz, 433 MHz
- Batiri: 1 x Litiumu CR2 (tí ó wà pẹ̀lú rẹ̀)
- Awọn iwọn: Isunmọ 5.12 x 2.72 x 1.14 inches (13 x 6.9 x 2.9 cm)
- Ìwúwo: Isunmọ 2.08 iwon (0.06 kg)
- UPC: 734721923729
9. Atilẹyin ọja ati Support
Fun alaye atilẹyin ọja ati atilẹyin imọ-ẹrọ, jọwọ tọka si osise olupese webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira.
