Futaba SBS-02G GPS Telemetry Sensor User Manual

1. Ifihan

The Futaba SBS-02G is a versatile, small, and compact telemetry sensor designed for use with Futaba S.Bus2 compatible receivers and transmitters. This sensor provides crucial flight data, including altitude, variometer readings, GPS-derived speed, distance, and position information, enhancing your remote control experience with real-time feedback.

It integrates seamlessly into your telemetry system, offering precise measurements for various flight parameters. The pressure sensor delivers variometer and altitude data, while the GPS sensor provides distance, speed, and positional data.

2. Awọn iṣọra aabo

Please read and understand these safety precautions before using the SBS-02G sensor to ensure safe operation and prevent damage to the product or other equipment.

• Ibi ti ina elekitiriki ti nwa: Rii daju pe iṣẹ voltage is within the specified range of 3.7V to 8.4V. Incorrect voltage le ba sensọ naa jẹ.
• Asopọmọra: Always connect the sensor to the S.Bus2 input on your telemetry receiver. Incorrect wiring can lead to malfunction.
• Ayika: Avoid exposing the sensor to extreme temperatures, moisture, dust, or direct sunlight. Operate in a clean, dry environment.
• Mimu: Handle the sensor with care. Do not drop it or subject it to excessive vibration or shock.
• Awọn atunṣe: Do not attempt to open, modify, or repair the sensor. Unauthorized modifications will void the warranty and may cause damage.
• Ìjánu: Keep the sensor away from strong magnetic fields or other sources of electronic interference that could affect GPS signal reception.

3. Package Awọn akoonu

The Futaba SBS-02G GPS Telemetry Sensor package typically includes:

• Futaba SBS-02G GPS Telemetry Sensor
• Ilana Afowoyi (iwe yii)

Note: Contents may vary slightly depending on the region or specific product bundle.

4. Eto ati fifi sori

Follow these steps to properly set up and install your Futaba SBS-02G sensor:

1. Iṣagbesori: Securely mount the SBS-02G sensor in your model. Choose a location that is free from excessive vibration and allows for clear reception of GPS signals (e.g., not completely enclosed by carbon fiber or metal). Ensure the sensor is oriented correctly as per your model's requirements.
2. Connection to Receiver: Connect the sensor's cable to the S.Bus2 input port on your Futaba telemetry receiver. Ensure the connector is fully inserted and correctly oriented to avoid damage.
3. Ibi ti ina elekitiriki ti nwa: The sensor draws power directly from the S.Bus2 connection. Ensure your receiver system provides a stable power supply within the sensor's operating voltage ibiti o ti 3.7V to 8.4V.
4. Ibamu pẹlu Agbekalẹ: The SBS-02G sensor is compatible with the following Futaba transmitters: T10J, T12K, T14SG, FX22, FX32, FX36, T16SZ, T18SZ, T18MZ. The new Version 2 offers 10x greater precision with T18MZ, T18MZWC, T16SZ, T18SZ, and FX36 transmitters.
5. Iṣeto akọkọ: Once connected and powered on, your transmitter should automatically detect the sensor. Refer to your transmitter's manual for specific instructions on how to display and log telemetry data from the SBS-02G.

Figure 1: Futaba SBS-02G GPS Telemetry Sensor with its connection cable. This image shows the compact black casing of the sensor with the "SBS-02G Futaba" logo clearly visible, and the attached three-wire connector for S.Bus2 integration.

5. Awọn ilana Iṣiṣẹ

The SBS-02G sensor operates automatically once connected to a compatible S.Bus2 receiver and transmitter. The data it collects is transmitted in real-time to your Futaba telemetry-enabled transmitter.

5.1. Data Provided by the Sensor

• Variometer (Vario): Measures the rate of climb or descent.
  • Measurement Range: -150 m/s to +150 m/s
  • Resolution: Approximately 10-100 cm/s (depending on the transmitter)
• Giga: Measures the current height above a reference point.
  • Measurement Range: -700 m to +5500 m
  • Resolution: 0.1-1 m (depending on the transmitter)
• Speed (GPS): Measures the ground speed of your model.
  • Measurement Range: 0 to 500 km/h
• Distance (GPS): Measures the distance traveled from a starting point.
  • Measurement Range: 0 to 5000 m
• Position (GPS): Provides real-time geographical coordinates.

5.2. Viewing Telemetry Data

Refer to your Futaba transmitter's instruction manual for detailed information on how to:

• Display real-time telemetry data on the transmitter screen.
• Set up alarms for specific telemetry values (e.g., low altitude, high speed).
• Log telemetry data for post-flight analysis.
• Calibrate or reset sensor values if applicable.

6. Itọju

The Futaba SBS-02G sensor is designed for durability and requires minimal maintenance. Adhere to the following guidelines to ensure its longevity and optimal performance:

• Ninu: Gently wipe the sensor's exterior with a soft, dry cloth. Do not use solvents, alcohol, or abrasive cleaners.
• Ibi ipamọ: When not in use, store the sensor in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ayewo: Periodically inspect the sensor's cable and connector for any signs of wear, fraying, or damage. Replace if necessary.
• Idaabobo Ayika: Protect the sensor from water, moisture, and excessive dust, which can impair its functionality.

7. Laasigbotitusita

If you encounter issues with your Futaba SBS-02G sensor, consider the following troubleshooting steps:

• Ko si Data Telemetry:
  • Ensure the sensor is correctly connected to the S.Bus2 port on your receiver.
  • Rí i dájú pé a ti tan olugba naa ati pe o n ṣiṣẹ daradara.
  • Check your transmitter's telemetry settings to ensure the sensor is recognized and enabled.
  • Confirm your transmitter is compatible with the SBS-02G sensor.
• Inaccurate GPS Data (Speed, Distance, Position):
  • Ensure the sensor has a clear, unobstructed view of the sky for optimal GPS signal reception. Avoid mounting it under carbon fiber or metal parts.
  • Allow sufficient time for the sensor to acquire GPS satellites after power-up. This may take a few minutes.
  • Test the sensor in an open outdoor area, away from tall buildings or dense foliage that could block GPS signals.
• Inaccurate Vario/Altitude Data:
  • Ensure the pressure sensor port (usually a small hole on the casing) is not blocked by dirt, debris, or mounting material.
  • Rapid changes in air pressure due to weather can affect altitude readings.
• Dátà Àìpẹ́:
  • Check all connections for looseness or damage.
  • Rii daju pe iṣẹ voltage is stable and within the specified range.
  • Minimize sources of electrical interference near the sensor or receiver.

If problems persist after following these steps, please contact Futaba customer support or your local dealer for further assistance.

8. Awọn pato

9. Atilẹyin ọja ati Support

Futaba products are manufactured to high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Futaba webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local Futaba dealer or the official Futaba customer support channels. Contact information can typically be found on the Futaba webaaye tabi lori apoti ọja.

Awọn orisun Ayelujara:

• Futaba Official Webojula (for product updates, FAQs, and support)
• Futaba Service & Support (fun apẹẹrẹample ọna asopọ, ọna asopọ gangan le yatọ)