Volkano Freeway Series 1080P Dash Camera User Manual

Ọrọ Iṣaaju

Thank you for choosing the Volkano Freeway Series 1080P Dash Camera. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. This dash camera is designed to record your journeys in 1080p resolution, featuring a 140-degree wide-angle lens, built-in G-sensor, loop recording, night vision capabilities, and a parking mode for enhanced vehicle security.

Package Awọn akoonu

Jọwọ ṣayẹwo awọn akoonu package lati rii daju pe gbogbo awọn ohun kan wa:

• 1 x Volkano Freeway Series 1080P Dash Camera (Black)
• 1 x Àgbàrá Òkè
• 1 x Okun Ṣaja Ọkọ ayọkẹlẹ
• 1 x Itọsọna olumulo

Image: Retail packaging of the Volkano Freeway Series 1080P Dash Camera, showing the camera and key features.

Ọja Pariview

Familiarize yourself with the components and controls of your dash camera.

Aworan: Angled view of the Volkano Freeway Series 1080P Dash Camera, highlighting the lens, screen, and control buttons on the side.

Awọn ohun elo kamẹra:

• Lẹnsi: Ya fidio footage.
• Ifihan LCD 3-inch: Fun viewn gbe footage, playback, and menu navigation.
• Micro SD Kaadi Iho: Insert your memory card here (up to 32GB, Class 10 recommended).
• Bọtini agbara: Yipada ẹrọ si tan/pa.
• Bọ́tìnì Àkójọ Àtòjọ (M): O wọle si awọn eto ati awọn aṣayan.
• Bọtini O dara: Confirms selections and starts/stops recording.
• Up/Down Navigation Buttons: Ó ń lọ kiri nínú àwọn àṣàyàn àkójọ oúnjẹ ó sì ń ṣàtúnṣe àwọn ètò rẹ̀.
• Ibudo USB: Fun ipese agbara ati gbigbe data.
• Bọtini atunto: Resets the device to factory settings (use a thin pin).

Ṣeto

1. Fi Micro SD Kaadi sii

1. Rii daju pe kamẹra dash ti wa ni pipa.
2. Locate the Micro SD card slot on the side of the camera.
3. Insert a Class 10 or higher Micro SD card (up to 32GB) into the slot until it clicks into place.
4. Lati yọọ kuro, tẹ kaadi naa rọra titi yoo fi jade.

Note: Format the Micro SD card within the camera's settings before first use to ensure optimal performance.

2. Gbigbe Kamẹra Dash

1. Attach the suction mount to the dash camera.
2. Clean the desired area on your windshield.
3. Tẹ ago fifa omi naa si oju ferese naa ki o si yi ideri naa pada lati so o mọ.
4. Ṣatunṣe igun kamẹra lati rii daju pe o mọ view ojú ọ̀nà tó wà níwájú, kí o má baà dènà ìdènà fún ìwakọ̀ rẹ view.

Image: The Volkano Freeway Series 1080P Dash Camera installed on a car windshield, showing its position relative to the driver's view.

3. Agbara ẹrọ naa

1. Connect the car charger cable to the USB port on the dash camera.
2. Plug the other end of the charger into your vehicle's 12V power outlet (cigarette lighter socket).
3. The camera will automatically power on and begin recording when the vehicle starts. It will power off shortly after the vehicle is turned off.

Awọn ilana Iṣiṣẹ

1. Ipilẹ Gbigbasilẹ

• Once powered on, the camera automatically starts recording. A red indicator light or icon on the screen confirms recording is active.
• Tẹ awọn OK button to manually stop or start recording.
• Gbigbasilẹ Loop: The camera records in continuous loops (e.g., 1, 3, or 5 minutes). When the memory card is full, the oldest unlocked files ti wa ni kọ.

2. G-Sensor (Emergency Recording)

• The built-in G-sensor detects sudden impacts or collisions.
• Upon detection, the current video segment is automatically locked to prevent it from being overwritten by loop recording.
• Adjust G-sensor sensitivity in the settings menu.

3. Pa Ipo

• When enabled, the camera will automatically start recording if it detects motion or impact while the vehicle is parked and the camera is off.
• This feature requires a continuous power supply or sufficient internal battery charge.

4. Lilọ kiri Akojọ aṣyn ati Eto

1. Tẹ awọn M (Akojọ aṣyn) bọtini lati tẹ awọn eto akojọ.
2. Lo awọn Soke / Isalẹ buttons to navigate through options.
3. Tẹ OK láti yan àṣàyàn kan tàbí láti jẹ́rìí sí ètò kan.
4. Tẹ M lẹẹkansi lati jade kuro ni akojọ aṣayan.

Key settings include: Video Resolution (1080p/720p), Loop Recording duration, G-Sensor sensitivity, Date/Time, Parking Monitor, and formatting the SD card.

5. Sisisẹsẹhin

• While not recording, press the M (Akojọ aṣyn) bọtini lẹmeji lati tẹ ipo ṣiṣiṣẹsẹhin sii.
• Lo awọn Soke / Isalẹ awọn bọtini lati yan fidio kan file.
• Tẹ OK lati mu fidio ti o yan ṣiṣẹ.
• Tẹ M to exit playback mode.

Itoju

1. Ninu Kamẹra

• Ensure the camera is powered off and disconnected from power.
• Lo asọ ti o rọ, ti o gbẹ lati nu ara kamẹra mọ.
• For the lens, use a lens cleaning cloth and specialized lens cleaner to avoid scratches.
• Ma ṣe lo abrasive ose tabi epo.

2. Iṣakoso kaadi iranti

• Regularly format your Micro SD card (at least once a month) to maintain optimal recording performance and prevent data corruption.
• Always power off the camera before inserting or removing the Micro SD card.

Laasigbotitusita

Awọn pato

Alaye atilẹyin ọja

The Volkano Freeway Series 1080P Dash Camera comes with a 1 Odun Atilẹyin ọja Lopin lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn iṣelọpọ ati iṣẹ ṣiṣe labẹ lilo deede.

For details on warranty claims or to register your product for a potential warranty extension, please refer to the official Volkano webojula tabi kan si atilẹyin alabara.

Onibara Support

Should you have any questions, require technical assistance, or need support with your Volkano Freeway Series 1080P Dash Camera, please contact us:

• Lori ayelujara: Message us via the official Volkano Page.
• Refer to the Volkano webojú-òpó wẹ́ẹ̀bù fún àwọn ohun èlò ìrànlọ́wọ́ àfikún àti ìwífún ìbáṣepọ̀.