AMP Research PowerStep Instruction Manual

1. Ti pariview

Awọn AMP Research PowerStep is an automatic, electric-powered running board system designed to provide convenient vehicle access. It extends instantly when the vehicle door is opened and retracts out of sight when the door closes, enhancing ground clearance, aerodynamics, and overall vehicle appearance. The system is constructed with die-cast aluminum alloy components and precision stainless steel pivot pins for stability and durability.

Awọn ẹya pataki:

• Automatic Deployment: Steps automatically extend when doors open and retract when doors close.
• Ikole ti o lagbara: Engineered with 6-inch wide, cab-length step boards capable of supporting a 600 lb. load, featuring heavy-duty stainless steel pivot pins.
• Imudara Aabo: Features a textured, slip-resistant stepping surface for optimal traction in various weather conditions. Includes onboard LED lighting and 'Anti-Pinch' technology to prevent obstruction.
• Awọn ohun elo ti o tọ: Made in the USA with global materials, utilizing corrosion-resistant aluminum.

Nọmba 1: AMP Research PowerStep system components.

2. Parts List (What's in the Box)

Ṣaaju ki o to bẹrẹ fifi sori ẹrọ, rii daju pe gbogbo awọn paati wa:

• Boards (2)
• Hardware (various bolts, nuts, washers)
• Ikun iṣan
• Installation Instructions (refer to manufacturer's official guide for detailed steps)

3. Eto ati fifi sori

Fifi sori ẹrọ ti awọn AMP Research PowerStep is designed to be vehicle-specific and includes all necessary hardware. For detailed, step-by-step instructions, always refer to the official installation guide provided with your product. The general process involves:

1. Igbaradi: Ensure the vehicle is on a level surface and safely supported. Gather all necessary tools.
2. Awọn biraketi iṣagbesori: Attach the motor and linkage assemblies to the vehicle's frame using the provided hardware.
3. Asopọmọra: Route the wiring harness from the motors to the vehicle's power source and interior control module. This typically involves connecting to the battery and door trigger wires.
4. Step Board Attachment: Secure the PowerStep boards to the linkage assemblies.
5. Awọn atunṣe ipari: Test the steps for proper deployment and retraction. Ensure all connections are secure and wiring is neatly routed and protected.

Installation Resources:

For visual guidance, the following seller-provided videos demonstrate installation processes for similar running boards on Jeep Wrangler JL models:

4. Awọn ilana Iṣiṣẹ

Awọn AMP Research PowerStep operates automatically based on your vehicle's door activity:

• Ifiranṣẹ: When a vehicle door is opened, the PowerStep will automatically extend to a comfortable stepping height.
• Iyọkuro: After a slight delay once the vehicle doors are closed, the PowerStep will retract and tuck tightly under the cab.
• Imọlẹ LED: Integrated LED lights illuminate the step and the ground below when the steps are deployed, enhancing visibility in low-light conditions.
• Imọ-ẹrọ Anti-Pinch: The system is equipped with 'Anti-Pinch' technology, which is designed to stop the step from operating if an obstruction is detected during deployment or retraction, preventing injury or damage.

Figure 2: PowerStep deployed for easy vehicle access.

5. Itọju

Lati rii daju awọn longevity ati ti aipe iṣẹ ti rẹ AMP Research PowerStep, regular maintenance is recommended:

• Ninu: Periodically clean the step surfaces and linkage mechanisms to remove dirt, mud, and debris. Use mild soap and water, avoiding harsh chemicals that could damage the finish.
• Lubrication: Inspect the pivot points and moving parts for smooth operation. Lubricate as recommended in the official product manual to prevent stiffness or wear.
• Ayewo: Regularly check all mounting hardware and electrical connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.

6. Laasigbotitusita

If you encounter issues with your PowerStep, consider the following common troubleshooting steps:

• Steps Not Deploying/Retracting: Check for any obstructions that might be triggering the 'Anti-Pinch' safety feature. Inspect electrical connections for looseness or corrosion. Ensure the vehicle battery has sufficient charge.
• Uneven Operation: Verify that all mounting hardware is securely tightened. Check for any debris or damage to the linkage mechanisms.
• Awọn imọlẹ LED ko ṣiṣẹ: Inspect the wiring to the LED lights for damage or loose connections.

If problems persist, consult the comprehensive troubleshooting section in your official AMP Research PowerStep installation guide or contact customer support.

7. Awọn pato

8. Atilẹyin ọja ati Support

Atilẹyin ọja:

AMP Research provides a hassle-free, comprehensive 5-year/60,000-mile warranty for the PowerStep. Please refer to the official warranty documentation included with your product for full terms and conditions.

Atilẹyin Onibara:

For further assistance, technical support, or warranty claims, please contact AMP Research customer service directly. Contact information can typically be found in your product packaging or on the official AMP Iwadi webojula.