PowerA Enhanced Wireless Controller for Nintendo Switch Instruction Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your PowerA Enhanced Wireless Controller for Nintendo Switch. Please read this guide thoroughly to ensure optimal performance and a satisfying gaming experience.

Ṣeto

Imudojuiwọn System

Ensure your Nintendo Switch system is updated to version 6.0.1 or later. Connect your Nintendo Switch to the internet. Navigate to Eto Eto from the HOME Menu, then scroll down to Eto to see the system update version and automatically check for updates.

Awọn batiri fifi sori ẹrọ

The controller requires two (2) AA alkaline batteries for operation. For optimal performance, use new alkaline batteries.

1. Wa yara batiri ni ẹhin oludari.
2. Open the battery door by sliding it downwards.
3. Insert two fresh AA alkaline batteries, ensuring correct polarity (+/-) bi itọkasi inu yara.
4. Close the battery door securely until it clicks into place.

Pada view of the controller with the battery compartment visible.

Sisopọ Alailowaya

Follow these steps to pair your controller with your Nintendo Switch:

1. Ensure your Nintendo Switch console is powered on.
2. Lati Akojọ aṣyn Ile, yan Awọn oludari.
3. Yan Yi Dimu / Bere fun.
4. On the PowerA Enhanced Wireless Controller, press and hold the Bọtini SYNC (located on the top edge of the controller, between the shoulder buttons) for at least one second.
5. The LED connection indicator on the controller will flash, signaling it is in pairing mode.
6. Once the controller is paired, it will auto-connect next time the console is powered on and the controller is activated.

Awọn ilana Iṣiṣẹ

Awọn iṣakoso ipilẹ

The PowerA Enhanced Wireless Controller features a standard button layout for intuitive gameplay:

• Two analog sticks for precise movement and camera control.
• A D-pad for directional input.
• A/B/X/Y action buttons.
• L/R shoulder buttons and ZL/ZR triggers.
• Ni afikun (+) and Minus (-) awọn bọtini.
• HOME button and Capture button.

The controller also supports motion controls for compatible games, enhancing your immersive experience.

Iwaju view of the controller, showcasing apẹrẹ ergonomic rẹ ati ipilẹ bọtini.

Advanced Gaming Buttons (AGB)

The controller includes two mappable Advanced Gaming Buttons (AGB) on the back, allowing you to assign functions for quick access during gameplay.

To Program an AGB:

1. Mu awọn Bọtini eto (small button on the back, near the battery compartment) for 2-3 seconds. The LED connection indicator will slowly flash, signaling program mode.
2. Press the button you wish to map (A, B, X, Y, L, R, ZL, ZR, D-pad, or any other standard button).
3. Press the AGB (left or right) you want to assign the function to.
4. The LED connection indicator will flash quickly to confirm the AGB has been programmed.

To Reset AGBs:

Tẹ mọlẹ Bọtini eto for 5 seconds to clear all assigned functions from the AGBs.

LED Ifi

The controller features LED indicators to provide important status information:

• The LED near the Bọtini SYNC will flash red when the alkaline batteries are nearing depletion. Replace batteries promptly to avoid gameplay interruption.
• Awọn Ile/View awọn bọtini indicate player number (1-8) and will flash during the programming of Advanced Gaming Buttons.

Itoju

To ensure the longevity and optimal performance of your PowerA Enhanced Wireless Controller, please follow these maintenance guidelines:

• Keep the controller clean by regularly wiping it with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Avoid exposing the controller to extreme temperatures, high humidity, or direct sunlight.
• Do not disassemble or attempt to repair the controller yourself, as this may void the warranty.
• Store the controller in a safe place when not in use to prevent accidental damage.

Laasigbotitusita

Controller Not Pairing

• Confirm that fresh AA alkaline batteries are properly installed in the controller.
• Ensure your Nintendo Switch system is updated to the latest version (6.0.1 or later).
• Follow the wireless pairing process detailed in the "Wireless Pairing" section.
• Remove and replace the alkaline batteries to perform a hard reset of the wireless controller, then attempt pairing again.

Input Issues (Sticks/Buttons Not Responding)

• If control sticks or buttons are not responding as expected, try recalibrating them through the Nintendo Switch System Settings. Navigate to Eto Eto > Awọn oludari ati awọn sensọ > Calibrate Iṣakoso duro lori or Calibrate išipopada idari.
• Ensure there are no obstructions around the buttons or analog sticks.

Awọn pato

Atilẹyin ọja ati Support

This PowerA Enhanced Wireless Controller is an officially licensed product and comes with a 2-odun lopin atilẹyin ọja.

For support with your authentic PowerA accessories, including warranty claims or technical assistance, please visit the support section of PowerA.com or contact their customer service directly.

Motion Warning

Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendonitis, carpal tunnel syndrome, skin irritation or eyestrain:

• Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don't think you need it.
• Awọn obi yẹ ki o ṣe abojuto awọn ọmọ wọn fun ere ti o yẹ.
• Ti ọwọ rẹ, ọrun-ọwọ, apa tabi oju ba rẹwẹsi tabi ọgbẹ nigba ti ndun, tabi ti o ba ni rilara awọn aami aisan bii tingling, numbness, sisun tabi lile, da duro ati sinmi fun awọn wakati pupọ ṣaaju ṣiṣere lẹẹkansi.
• Ti o ba tẹsiwaju lati ni eyikeyi ninu awọn aami aisan ti o wa loke tabi aibalẹ miiran lakoko tabi lẹhin iṣere, da iṣere duro ki o wo dokita kan.