Ọja Pariview
The Homecraft Corner Shower Stool is designed to provide a comfortable and safe seating solution for individuals requiring assistance during showering or bathing. Its unique quadrant design allows it to fit snugly into shower and bath corners, maximizing space. This adjustable stool is suitable for elderly, handicapped, and disabled users, as well as those recovering from injuries, offering stability and support.
Image: The Homecraft Corner Shower Stool, showcasing its quadrant seat and adjustable legs with non-slip feet.
Alaye Aabo
Please read and understand all safety instructions before using the Homecraft Corner Shower Stool. Failure to do so may result in injury.
- Agbara iwuwo: Maṣe kọja agbara iwuwo ti o pọju ti 265 poun (120 kg).
- Ṣayẹwo iduroṣinṣin: Before each use, ensure all three legs are firmly on the ground and the stool is stable. Do not use if the stool wobbles or feels unstable.
- Ṣatunṣe Ẹsẹ: Ensure the push-pins are fully engaged in the adjustment holes after changing leg height. Uneven leg heights can cause instability.
- Ẹsẹ ti ko ni isokuso: Verify that the rubber feet are clean and free of soap residue or debris to maintain maximum slip resistance.
- Ilẹ: Use the stool only on flat, even surfaces within the shower or bath.
- Ayewo: Regularly inspect the stool for any signs of wear, damage, or corrosion. Discontinue use immediately if any damage is found.
- Awọn ọmọde: This product is not a toy. Keep out of reach of children when not in use by an adult requiring assistance.
Package Awọn akoonu
Ni ṣiṣi package, jọwọ rii daju pe gbogbo awọn paati wa ati pe ko bajẹ:
- 1 x Homecraft Corner Shower Stool (fully assembled)
Note: The Homecraft Corner Shower Stool typically comes pre-assembled, requiring only height adjustment.
Ṣeto
Assembly and Height Adjustment
The Homecraft Corner Shower Stool is designed for minimal assembly, primarily focusing on adjusting the leg height to suit the user's needs.
- Yọọ kuro: Carefully remove the shower stool from its packaging.
- Determine Desired Height: Sit on a stable chair of a comfortable height. Measure the distance from the floor to the back of your knee. This measurement can serve as a guide for the stool's seat height. The stool is adjustable from 17 inches to 21 inches.
- Adjust Legs:
- Locate the push-pins on each leg of the stool.
- Press the push-pin inward and slide the lower leg section up or down to the desired height.
- Ensure the push-pin fully snaps into one of the adjustment holes.
- Repeat this process for all three legs, ensuring they are adjusted to the same height setting lati ṣetọju iduroṣinṣin.
- Jẹrisi Iduroṣinṣin: Before placing the stool in the shower, gently press down on the seat and check for any wobbling. All three legs must be evenly set and firmly on the ground.
Image: The Homecraft Corner Shower Stool demonstrating its adjustable leg mechanism, allowing users to customize the height for optimal comfort and safety.
Aworan: A sunmọ-soke view of the push-pin mechanism on the stool's leg, which is used for secure height adjustment.
Awọn ilana Iṣiṣẹ
Using your Homecraft Corner Shower Stool safely and effectively:
- Ibi: Position the stool firmly in a corner of your shower or bath. Ensure all three non-slip rubber feet are in full contact with the shower floor.
- Entering the Shower: Carefully enter the shower area. Use grab bars if available for additional support.
- Sitting Down: Turn around and back up to the stool until your legs touch the seat. Slowly lower yourself onto the seat, using your arms for support if needed. Ensure you are centered and balanced on the seat.
- During Showering: Remain seated while showering. Avoid leaning excessively or standing on the stool.
- Exiting the Shower: Carefully push up from the seat, using your legs and arms for support. Once standing, carefully exit the shower area.
Always exercise caution when entering and exiting the shower, especially on wet surfaces.
Itoju
Proper maintenance will extend the life of your Homecraft Corner Shower Stool and ensure continued safe operation.
- Ninu: Clean the stool regularly with a mild soap and water solution. Rinse thoroughly and wipe dry to prevent water spots and soap scum buildup. Avoid abrasive cleaners or harsh chemicals, as these can damage the vinyl seat and frame finish.
- Ayewo: Periodically inspect the stool for:
- Loose or damaged push-pins on the legs.
- Cracks, tears, or excessive wear on the vinyl seat pad.
- Damage or hardening of the rubber non-slip feet.
- Signs of rust or corrosion on the frame.
- Ibi ipamọ: When not in use for extended periods, store the stool in a dry, cool place away from direct sunlight.
If any part of the stool appears damaged or worn, discontinue use immediately and contact customer support for assistance.
Laasigbotitusita
Ni isalẹ wa awọn ọran ti o wọpọ ati awọn solusan ti o pọju wọn:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Stool wobbles or is unstable. | Legs are not adjusted to the same height. Push-pins are not fully engaged. Uneven shower floor surface. Damaged rubber feet. | Ensure all three legs are set to the identical height setting. Press push-pins firmly until they snap into place. Reposition the stool on a flatter section of the shower floor. Inspect feet for damage; replace if necessary. |
| Difficulty adjusting leg height. | Push-pin is stuck or corroded. Debris inside the leg tubing. | Apply a small amount of silicone spray to the push-pin and gently work it. Clean out any debris from the leg tubing. |
| Stool slips on shower floor. | Rubber feet are dirty or have soap residue. Rubber feet are worn or hardened. | Clean the rubber feet thoroughly with soap and water. Replace worn or hardened rubber feet. |
If the problem persists after attempting these solutions, please contact Homecraft customer support.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | 49332 |
| Brand | Iṣẹ ile |
| Awọn iwọn ijoko (W x D) | 19 inches x 15 inches (48.3 cm x 38.1 cm) |
| Adijositabulu Giga Ibiti | 17 inches - 21 inches (43.2 cm - 53.3 cm) |
| Agbara iwuwo | 265 poun (120 kg) |
| Ohun elo ijoko | Vinyl covered pad |
| Legs/Frame Material | Coated metal (e.g., aluminum or steel) with rubber non-slip feet |
Alaye atilẹyin ọja
Homecraft products are manufactured to high standards and are subject to strict quality control. For specific warranty details regarding your Homecraft Corner Shower Stool, please refer to the warranty card included with your purchase or visit the official Homecraft website. Generally, warranty covers manufacturing defects under normal use.
Jọwọ ṣe idaduro ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.
Onibara Support
If you have any questions, require assistance with assembly, or need to troubleshoot an issue not covered in this manual, please contact Homecraft customer support.
- Atilẹyin Ayelujara: Visit the official Homecraft webAaye fun awọn FAQs, iforukọsilẹ ọja, ati awọn fọọmu olubasọrọ.
- Ibi iwifunni: Refer to the packaging or the Homecraft webAaye fun awọn nọmba foonu iṣẹ alabara tuntun ati awọn adirẹsi imeeli.
When contacting support, please have your model number (49332) and purchase date ready.
