Konica Minolta Bizhub C364 User Manual

1. Ifihan

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Konica Minolta Bizhub C364 multifunction device. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Alaye Aabo

Ṣe akiyesi awọn iṣọra ailewu wọnyi lati yago fun ipalara tabi ibajẹ si ẹrọ naa:

• Rii daju pe ẹrọ naa ti gbe sori iduro, ipele ipele.
• Connect the device to a grounded power outlet with the correct voltage.
• Maṣe ṣe idiwọ awọn ṣiṣi eefin.
• Jeki awọn olomi kuro lati ẹrọ naa.
• Do not attempt to service the device yourself. Refer to qualified service personnel.
• Avoid touching internal components, especially during operation or immediately after use, as some parts may be hot.

3. Ọja irinše ati Loriview

Familiarize yourself with the main parts of your Bizhub C364 device.

Nọmba 3.1: Iwaju view of the Konica Minolta Bizhub C364 multifunction printer, showing the main unit, automatic document feeder, control panel, and paper trays.

3.1 Iṣakoso igbimo

Nọmba 3.2: Sun mo tipetipe view of the Bizhub C364 control panel, featuring a large color touchscreen display, physical buttons for Power, Fax/Scan, Copy, 10-Keypad, Start, Stop, and Reset, and status indicators.

The control panel is your primary interface for operating the device. It features a large touchscreen display for navigating menus and settings, along with dedicated buttons for common functions.

3.2 Atokan iwe afọwọṣe (ADF)

Nọmba 3.3: View of the Automatic Document Feeder (ADF) on top of the Bizhub C364, showing the input tray for multiple pages and the document guides.

The ADF allows you to automatically feed multiple pages for copying, scanning, or faxing without placing each page individually on the scanner glass.

3.3 Scanner Glass

Nọmba 3.4: The scanner glass of the Bizhub C364, revealed by lifting the ADF cover. This area is used for scanning single pages or delicate documents.

Use the scanner glass for single pages, books, or delicate documents that cannot be fed through the ADF.

3.4 Output Tray / Finisher

Nọmba 3.5: Apa view of the Bizhub C364 showing the output tray, where printed or copied documents are collected.

Finished documents are delivered to the output tray. Depending on your configuration, an optional finisher may provide stapling or sorting capabilities.

4. Eto

4.1 Ṣiṣii ati Gbe

1. Ni ifarabalẹ yọ ẹrọ kuro lati apoti rẹ.
2. Place the Bizhub C364 on a sturdy, level surface capable of supporting its weight. Ensure adequate space around the device for ventilation and access to paper trays and maintenance areas.
3. Yọ gbogbo awọn teepu aabo ati awọn ohun elo iṣakojọpọ kuro ni ita ati inu ẹrọ naa.

4.2 Asopọ agbara

1. Connect the power cord to the power inlet on the rear of the device.
2. Pulọọgi opin miiran ti okun agbara sinu iṣan itanna ti o wa lori ilẹ.
3. Press the power button, typically located on the control panel, to turn on the device.

4.3 Initial Configuration and Driver Installation

1. Follow the on-screen prompts on the control panel for initial setup, including language, date, and time settings.
2. For network connectivity, connect an Ethernet cable to the device's LAN port and configure network settings (IP address, subnet mask, gateway) via the control panel or web ni wiwo.
3. To enable printing and scanning from a computer, install the appropriate drivers. Drivers can typically be found on the Konica Minolta support webojula.
4. For USB connection, connect a USB cable from the device to your computer. Install necessary drivers as prompted by your operating system.

5. Awọn ilana Iṣiṣẹ

5.1 ikojọpọ Iwe

The Bizhub C364 features four paper drawers. Ensure paper is loaded correctly for optimal performance.

1. Pull out the desired paper drawer until it stops.
2. Ṣatunṣe awọn itọsọna iwe lati baamu iwọn iwe ti o n ṣajọpọ.
3. Load the paper stack with the print side facing up (or as indicated by the tray diagram). Do not overfill the tray beyond the maximum fill line.
4. Gently push the paper drawer back into the device until it clicks into place.
5. Confirm the paper size and type on the control panel if prompted.

5.2 Awọn iwe aṣẹ didakọ

1. Place your original document(s) face up in the Automatic Document Feeder (ADF) or face down on the scanner glass.
2. Lori awọn iṣakoso nronu, tẹ awọn Daakọ bọtini.
3. Adjust settings such as quantity, color mode (color/black & white), duplex (two-sided), and zoom using the touchscreen.
4. Tẹ awọn Bẹrẹ bọtini lati bẹrẹ daakọ.

5.3 Awọn iwe aṣẹ titẹ sita

1. Ensure the device is connected to your computer via USB or network and that drivers are installed.
2. Ṣii iwe ti o fẹ lati tẹ sita lori kọnputa rẹ.
3. Yan Titẹ sita láti inú àkójọ ohun èlò náà.
4. Choose the Konica Minolta Bizhub C364 as your printer.
5. Adjust print settings (e.g., paper source, color, duplex, number of copies) as needed.
6. Tẹ Titẹ sita to send the job to the device.

5.4 Awọn iwe-iṣayẹwo

1. Place your original document(s) in the ADF or on the scanner glass.
2. Lori awọn iṣakoso nronu, tẹ awọn Fax/Scan button, then select the Scan function.
3. Choose your desired scan destination (e.g., email, network folder, USB drive) and adjust scan settings (e.g., resolution, color mode, file ọna kika).
4. Tẹ awọn Bẹrẹ bọtini lati bẹrẹ Antivirus.

5.5 Faxing Awọn iwe aṣẹ

1. Place your original document(s) in the ADF or on the scanner glass.
2. Lori awọn iṣakoso nronu, tẹ awọn Fax/Scan button, then select the Fax function.
3. Enter the recipient's fax number using the 10-keypad or select from the address book.
4. Ṣe àtúnṣe sí àwọn ètò fax tó yẹ.
5. Tẹ awọn Bẹrẹ bọtini lati fi awọn Faksi.

6. Itọju

6.1 Cleaning Awọn ilana

• Òde: Mu ese ita gbangba pẹlu asọ, damp, lint-free asọ. Ma ṣe lo abrasive ose tabi epo.
• Gilasi Scanner: Gently clean the scanner glass and the underside of the ADF with a soft, lint-free cloth dampened with glass cleaner. Ensure no residue remains.
• Awọn Rollers ADF: Lorekore nu ADF rollers pẹlu kan lint-free asọ dampened with isopropyl alcohol to prevent paper feed issues.

6.2 Rírọ́pò Àwọn Ohun Èlò

The device will display messages on the control panel when consumables such as toner cartridges or the waste toner bottle need replacement. Refer to the on-screen instructions for specific replacement procedures.

• Awọn katiriji Toner: Replace empty toner cartridges with genuine Konica Minolta cartridges to ensure optimal print quality and device longevity.
• Waste Toner Bottle: Replace the waste toner bottle when prompted to prevent toner overflow.

7. Laasigbotitusita

This section addresses common issues you may encounter. For more complex problems, contact customer support.

• Awọn Jams Iwe: Follow the on-screen instructions to locate and clear paper jams. Always turn off the device before clearing jams if instructed.
• Didara Titẹjade Ko dara: Check toner levels, clean the print heads (if applicable), and ensure you are using appropriate paper types and settings.
• Ẹrọ Ko Dahun: Check power connections, ensure the device is turned on, and verify network or USB connections. Restarting the device may resolve temporary issues.
• Awọn ọran Asopọmọra Nẹtiwọọki: Verify network cable connection, check IP address settings, and ensure the device is visible on the network. Consult your network administrator if necessary.

8. Imọ ni pato

9. Atilẹyin ọja ati Support

This Konica Minolta Bizhub C364 device comes with a 90-ọjọ lopin atilẹyin ọja. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please refer to your purchase documentation or contact the seller directly.

For additional resources, including updated drivers and detailed troubleshooting guides, visit the official Konica Minolta support webojula.