1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of the Yealink Wall Mount Bracket, designed specifically for Yealink SIP-T27G and SIP-T29G IP phones. Please read this manual thoroughly before installation to ensure proper and safe use of the product.
2. Alaye Aabo
- Always ensure the mounting surface is strong enough to support the weight of the bracket and the phone.
- Lo awọn irinṣẹ ati ohun elo to yẹ fun fifi sori ẹrọ. Ti o ba ni idaniloju, kan si amoye ti o ni oye.
- Pa awọn ẹya kekere kuro lọdọ awọn ọmọde lati yago fun awọn eewu gbigbọn.
- Do not overtighten screws, as this may damage the bracket or the mounting surface.
- Ensure all cables are routed safely to prevent tripping hazards or damage.
3. Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ninu apo rẹ:
- Yealink Wall Mount Bracket (1)
- Mounting Screws (e.g., 2-4 screws, depending on design)
- Wall Anchors (if applicable, for drywall installation)
- Itọsọna Ibẹrẹ Yara (1)
Aworan 1: Example of Yealink Wall Mount Bracket and included hardware.
4. Eto ati fifi sori
Follow these steps to install the wall mount bracket and secure your IP phone.
4.1 Awọn irinṣẹ ti a beere
- Ikọwe
- Lu
- Drill bit (appropriate size for anchors/screws)
- Screwdriver (a ṣe iṣeduro ori Philips)
- Ipele (aṣayan, fun tito deede)
4.2 fifi sori Igbesẹ
- Yan Ibi kan: Select a suitable wall location that is structurally sound and allows for easy access to power and network cables. Ensure the height is convenient for phone use.
- Samisi Awọn aaye Liluho: Hold the wall mount bracket against the wall at the desired height and use a pencil to mark the positions for the mounting screws. Use a level to ensure the bracket is straight.
- Awọn Iho Pilot Lilu: Using the appropriate drill bit, drill pilot holes at the marked locations. If installing into drywall, insert wall anchors into the pilot holes until flush with the wall surface.
- Ṣe aabo Bracket naa: Align the bracket with the drilled holes (or anchors) and insert the mounting screws. Tighten the screws firmly with a screwdriver until the bracket is securely fastened to the wall. Do not overtighten.
- So Foonu naa: Carefully slide your Yealink SIP-T27G or SIP-T29G IP phone onto the bracket. Ensure it clicks into place or is otherwise securely seated according to the bracket's design.
- Awọn okun Sopọ: Route the power and network cables to the phone, ensuring they are not strained or pinched.
5. Awọn ilana Iṣiṣẹ
Once installed, the Yealink Wall Mount Bracket provides a stable platform for your IP phone.
- Gbigbe foonu naa: Gently align the phone's mounting slots with the bracket's tabs and slide it downwards until it locks into position.
- Yọ Foonu naa kuro: To remove the phone, lift it slightly and slide it upwards to disengage it from the bracket. Exercise caution to avoid dropping the phone.
- Awọn atunṣe: If the bracket offers any adjustable features (e.g., tilt), refer to the specific instructions provided with your bracket model for adjustment procedures.
6. Itọju
Regular maintenance ensures the longevity and proper function of your wall mount bracket.
- Ninu: Wipe the bracket with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which may damage the finish.
- Ayewo: Periodically check all mounting screws to ensure they remain tight. Inspect the bracket for any signs of wear or damage. If damage is observed, replace the bracket immediately.
7. Laasigbotitusita
If you encounter issues with your wall mount bracket, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Bracket náà dà bí ẹni pé ó rọ̀ sílẹ̀ lórí ògiri. | Screws are not tight enough, or wall anchors are not properly seated. | Tighten screws. If still loose, consider using larger anchors or relocating to a stud. |
| Phone does not fit or is unstable on the bracket. | Incorrect phone model for the bracket, or phone not properly engaged. | Ensure your phone is a Yealink SIP-T27G or SIP-T29G. Re-seat the phone carefully. |
| Cables are difficult to manage. | Cables are too short or not routed efficiently. | Use longer cables if necessary. Utilize cable ties or clips to organize cables neatly. |
8. Awọn pato
- Brand: Yealink
- Awọn awoṣe Foonu ibaramu: SIP-T27G, SIP-T29G
- Iru fifi sori: Ògiri Ògiri
- Àwọ̀: Dudu
- Ìwọ̀n Nkan: 3.41 iwon (nipa 96.67 giramu)
- Awọn iwọn idii: 8.07 x 6.5 x 2.2 inches (iwọn 20.5 x 16.5 x 5.6 cm)
- Awọn ẹya pataki: adijositabulu
- ASIN: B07H6T41CC
- Olupese: Yealink
9. Atilẹyin ọja ati Support
Fun alaye atilẹyin ọja ati atilẹyin imọ-ẹrọ, jọwọ tọka si Yealink osise webaaye tabi kan si olupin agbegbe rẹ. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.
Yealink Osise Webojula: www.yealink.com
