Stiga SP 375 Q Gasoline Chainsaw User Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Stiga SP 375 Q Gasoline Chainsaw. Please read this manual thoroughly before operating the chainsaw to ensure proper use and to prevent injury or damage.

The Stiga SP 375 Q is a lightweight and comfortable-to-use gasoline chainsaw, offering an excellent power-to-weight ratio. It is equipped with a high-torque 37.2 cm³ 2-stroke gasoline engine, an automatic oil pump, and delivers 1.2 kW (1.6 hp) of power. The 35 cm bar and chain are manufactured by Oregon. The chain reaches a speed of up to 21 m/s and features tool-less tensioning for convenience.

Awọn Itọsọna Aabo

Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always prioritize your safety and the safety of others.

• Ka iwe afọwọkọ naa: Always read and understand the entire user manual before operating the chainsaw.
• Ohun elo Idaabobo Ti ara ẹni (PPE): Always wear appropriate PPE, including a safety helmet, eye protection, hearing protection, gloves, and chainsaw protective trousers and boots.
• Agbegbe Iṣẹ: Ensure the work area is clear of obstacles, bystanders, and animals. Maintain a firm footing and balance.
• Mimu epo: Handle gasoline with extreme care. Refuel in a well-ventilated area, away from ignition sources. Do not smoke while refueling.
• Ayewo: Before each use, inspect the chainsaw for loose parts, damage, or wear. Ensure the chain brake is functional.
• Ifẹhinti: Máa kíyèsí ìfàsẹ́yìn. Má ṣe gé e pẹ̀lú orí ọ̀pá ìtọ́sọ́nà.
• Itọju: Perform regular maintenance as described in this manual to keep the chainsaw in safe working condition.

Package Awọn akoonu

Nígbà tí o bá ń tú àwọn nǹkan náà, jọ̀wọ́ rí i dájú pé gbogbo wọn wà níbẹ̀ tí wọn kò sì bàjẹ́:

• Stiga SP 375 Q Gasoline Chainsaw (main unit with guide bar and chain installed)
• Second Oregon Chain
• Practical Storage Box
• Afowoyi Olumulo (iwe-ipamọ yii)

Image: The Stiga SP 375 Q Gasoline Chainsaw, shown with its guide bar and chain, alongside a separate second Oregon chain and a practical storage box.

Ṣeto

1. Apapo epo ati epo

The Stiga SP 375 Q uses a 2-stroke gasoline engine. It requires a specific mixture of unleaded gasoline and 2-stroke engine oil. Refer to the engine oil manufacturer's instructions for the correct mixing ratio, typically 50:1 (2% oil) or 25:1 (4% oil) depending on the oil type. Always use fresh, high-quality fuel and oil.

• Da epo epo ati epo po sinu apoti epo ti a fọwọsi lọtọ.
• Mi apoti naa patapata lati rii daju pe o dapọ daradara.
• Fill the chainsaw's fuel tank carefully, avoiding spills.

2. Chain Lubrication Oil

The chainsaw features an automatic oil pump for chain lubrication. Fill the chain oil reservoir with high-quality bar and chain oil. Do not use waste oil or motor oil, as this can damage the pump and chain.

3. Chain Installation and Tensioning

Ensure the guide bar and chain are correctly installed. The Stiga SP 375 Q features tool-less chain tensioning.

• Loosen the side cover knob.
• Adjust the chain tensioning screw until the chain fits snugly against the guide bar, but can still be pulled freely by hand. There should be a small gap (approx. 2-3 mm) between the chain and the underside of the guide bar when lifted.
• Tighten the side cover knob securely.
• Check chain tension again after a few cuts, as new chains can stretch.

Aworan: Apa view of the Stiga SP 375 Q Gasoline Chainsaw, illustrating its general design and components.

Ṣiṣẹ

1. Bibẹrẹ Engine

Always place the chainsaw on a firm, flat surface before starting. Ensure the chain brake is engaged.

• Ṣe idaduro pq nipa titari oluso ọwọ iwaju siwaju.
• Set the choke lever to the "full choke" position (for cold starts).
• Tẹ boolubu alakoko ni igba pupọ titi ti epo yoo fi han.
• Pull the starter cord firmly and steadily until the engine fires briefly.
• Move the choke lever to the "half choke" or "run" position.
• Fa okun ibẹrẹ lẹẹkansi titi ti engine yoo bẹrẹ ati nṣiṣẹ laisiyonu.
• Disengage the chain brake before beginning to cut.

2. Ige imuposi

Always maintain a firm grip with both hands on the chainsaw handles. Stand with your feet apart for good balance.

• Ti n ṣubu: Plan your felling direction. Make a notch cut on the side of the tree in the felling direction, then a felling cut from the opposite side.
• Limbing: Remove branches from a felled tree. Work from the base of the tree towards the top, cutting smaller branches first.
• Bucking: Cut a felled tree into logs. Support the log to prevent pinching the guide bar.

3. Idekun Engine

To stop the engine, simply move the ignition switch to the "STOP" position. Engage the chain brake immediately after stopping the engine.

Itoju

Regular maintenance is crucial for the longevity and safe operation of your chainsaw.

1. Pípọ́n ẹ̀wọ̀n

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly using a round file of the correct diameter (refer to chain specifications) and a flat file for depth gauges. Alternatively, have it professionally sharpened.

2. Ninu

• Asẹ afẹfẹ: Clean the air filter regularly, especially in dusty conditions. A clogged air filter can reduce engine performance.
• Àwọn ìfọ́ ìtútù: Keep the engine's cooling fins free of sawdust and debris to prevent overheating.
• Guide Bar Groove: Clean the groove of the guide bar to ensure proper chain lubrication and movement.

3. sipaki Plug

Inspect and clean the spark plug periodically. Replace it if it is fouled or worn. Ensure the correct spark plug gap.

4. Ibi ipamọ

When storing the chainsaw for an extended period:

• Drain the fuel tank or run the engine until it runs out of fuel.
• Mọ chainsaw daradara.
• Apply a thin layer of oil to the guide bar and chain to prevent rust.
• Store in a dry, well-ventilated area, out of reach of children.

Laasigbotitusita

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact a qualified service technician.

Awọn pato

Atilẹyin ọja ati Support

Specific warranty details for the Stiga SP 375 Q Gasoline Chainsaw are not provided in this document. Please refer to the warranty card included with your product or visit the official Stiga webAaye fun alaye atilẹyin ọja alaye ati awọn ofin ati ipo.

For technical support, spare parts, or service inquiries, please contact your authorized Stiga dealer or the Stiga customer service department. Contact information can typically be found on the Stiga webaaye tabi lori apoti ọja.

When contacting support, please have your product model (SP 375 Q) and serial number (if applicable) ready.