Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Ifihan

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Awọn ilana aabo

Pataki: Failure to follow these safety instructions may result in electric shock, fire, or personal injury.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Rii daju pe ipese agbara voltage baamu aami igbelewọn lori ohun elo naa.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Maṣe fi ohun elo naa bọ inu omi tabi awọn olomi miiran.
• Ti okun ipese ba bajẹ, o gbọdọ paarọ rẹ nipasẹ olupese, aṣoju iṣẹ rẹ, tabi awọn eniyan ti o ni oye kanna lati yago fun ewu kan.
• Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn.

3. Ọja Ipariview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Awọn eroja alapapo: Horizontal round tubes for towel drying and radiant heat.
• Blower: Located at the bottom, provides rapid heat for quick room warming.
• Igbimọ Iṣakoso LCD: Displays temperature, mode, and programming settings.
• Awọn bọtini Iṣakoso: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

olusin 3.2: Iwaju view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view ti ohun elo naa, ifihanasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

olusin 3.3: Angled view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Eto ati fifi sori

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Iṣagbesori

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Itanna Asopọ

• Ikilọ: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Rii daju pe ilẹ ti o yẹ.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Awọn ilana Iṣiṣẹ

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Agbara Tan / Pa

• Tẹ awọn Agbara button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 LCD Ifihan ati idari

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Ipo, +/-, Pirogi) to adjust settings.

5.3 Awọn ọna ṣiṣe

Your radiator typically offers several operating modes:

• Ipo Itunu: Maintains a set temperature for continuous comfort.
• Ipo Eco: Maintains a lower, energy-saving temperature.
• Ipo Idaabobo Frost: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Ipo Eto: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Tẹ awọn Ipo button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 siseto

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Tẹ awọn Pirogi bọtini lati tẹ ipo siseto.
2. Lo awọn Ipo or arrow buttons to select the day and time segment you wish to program.
3. Lo awọn +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Tẹ Pirogi again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Itọju

Regular cleaning ensures optimal performance and extends the lifespan of your radiator.

• Ninu: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp asọ. Ma ṣe lo awọn afọmọ abrasive, awọn nkanmimu, tabi awọn kẹmika lile, nitori iwọnyi le ba ipari jẹ.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Ayẹwo gbogbogbo: Máa ṣàyẹ̀wò okùn iná àti pulọọgi lẹ́ẹ̀kọ̀ọ̀kan fún àwọn àmì ìbàjẹ́. Tí a bá rí ìbàjẹ́, kan sí onímọ̀ ẹ̀rọ tó mọ̀ nípa rẹ̀ fún àtúnṣe.

7. Laasigbotitusita

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Awọn pato

• Brand: Sauter
• Awoṣe: Marapi
• Nọmba awoṣe: 3410532201757
• Iru: Electric Towel Dryer Radiator with Blower
• Ijade agbara: 1750 Wattis
• Iṣakoso: LCD Screen, Programmable
• Ìwúwo: O to 27.25 kg
• ASIN: B07HGPKKJD

9. Atilẹyin ọja ati Support

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webaaye tabi lori apoti ọja rẹ.

Sauter Official Webojula: www.sauter.fr (Jọwọ ṣe ayẹwo agbegbe ti o tọ webaaye fun atilẹyin.)