1. Ifihan
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Pedrollo MC series electric pump. Please read this manual thoroughly before installation or operation to ensure proper use and to prevent damage or injury.
The Pedrollo MC series electric pumps are robust units constructed from cast iron, featuring a BICANALE impeller. This design enables the pump to effectively handle liquids containing suspended solid bodies and short fibers, making them ideal for conveying waste, sewage, mixed mud water, and groundwater in domestic, civil, and industrial applications.
Figure 1: Pedrollo MC 40/50-F Electric Pump. This image displays the robust cast iron construction of the pump, highlighting its compact design and the outlet flange for connection to the piping system. The top features two lifting rings for easy handling.
2. Alaye Aabo
Always adhere to the following safety precautions to prevent personal injury or damage to the pump:
- Ensure the pump is disconnected from the power supply before any installation, maintenance, or repair work.
- Àwọn òṣìṣẹ́ tó péye gbọ́dọ̀ ṣe àwọn ìsopọ̀ iná mànàmáná ní ìbámu pẹ̀lú àwọn ìlànà àti ìlànà agbègbè.
- Do not operate the pump dry. Ensure the pump is fully submerged in the liquid it is designed to handle before starting.
- Protect the power cable from sharp edges, heat, and oil. Do not use the cable to lift or move the pump.
- Wọ àwọn ohun èlò ààbò ara ẹni tó yẹ (PPE) bíi ibọ̀wọ́ àti ààbò ojú nígbà tí a bá ń fi sori ẹrọ àti nígbà tí a bá ń tọ́jú rẹ̀.
- The pump is designed for specific liquid types (sewage, waste water). Do not use it for flammable, corrosive, or explosive liquids.
- Rí i dájú pé ètò iná mànàmáná náà fìdí múlẹ̀ dáadáa.
3. Eto ati fifi sori
Fífi sori ẹrọ to peye ṣe pataki fun iṣẹ fifa ati igba pipẹ.
3.1 Unpacking ati ayewo
Carefully remove the pump from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
3.2 Ipo ati Ipo
- The pump must be installed in a well-ventilated area, protected from freezing temperatures.
- Ensure the pump is placed on a stable, level surface or suspended securely if using a lifting chain.
- Allow sufficient space around the pump for ventilation and future maintenance access.
3.3 Àwọn Ìsopọ̀ Píìpù
- Connect the discharge pipe to the pump's outlet flange. Ensure all connections are watertight and sealed properly to prevent leaks.
- Use pipes of adequate diameter to minimize friction losses and ensure efficient flow.
- Install a non-return valve (check valve) on the discharge line to prevent backflow when the pump stops.
- Consider installing a gate valve or ball valve on the discharge line for isolation during maintenance.
3.4 Itanna Asopọ
- Daju pe awọn ipese agbara voltage (400V, 50Hz) matches the pump's requirements.
- Connect the pump to a dedicated electrical circuit protected by a residual current device (RCD) and appropriate circuit breakers.
- Ensure proper grounding. The pump is equipped with a grounding wire that must be connected to the system's ground.
- Consult the wiring diagram provided with the pump for specific connection details.
4. Awọn ilana Iṣiṣẹ
4.1 Pre-isẹ Ṣayẹwo
- Confirm all piping connections are secure and leak-free.
- Rí i dájú pé a ti rì gbogbo omi tí a fẹ́ fi sínú omi náà.
- Verify that the power supply is connected correctly and safely.
4.2 Bibẹrẹ fifa
Once all checks are complete, switch on the power supply to the pump. The pump should start operating smoothly. Monitor the initial operation for any unusual noises or vibrations.
4.3 Idaduro fifa soke
To stop the pump, simply switch off the power supply. If the pump is controlled by a float switch, it will automatically stop when the liquid level drops below a certain point.
4.4 Tesiwaju Isẹ
The Pedrollo MC series pumps are designed for continuous duty within their specified operating limits. Avoid operating the pump outside these limits to prevent overheating or premature wear.
5. Itọju
Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect power before performing any maintenance.
5.1 Awọn iṣayẹwo deede (oṣooṣu)
- Inspect the power cable for any signs of damage or wear.
- Check for any unusual noises or vibrations during operation, which may indicate a problem.
- Ensure the pump chamber is free from excessive debris buildup that could impede impeller rotation.
5.2 Impeller and Casing Cleaning (Annually or as needed)
- Disconnect power and remove the pump from its installation.
- Fara ṣii fifa soke casing (refer to service diagrams if available) and inspect the BICANALE impeller for any blockages or wear.
- Clean any accumulated debris from the impeller and pump casing.
- Reassemble the pump, ensuring all seals are correctly seated and fasteners are tightened.
5.3 Ibi ipamọ
If the pump is to be stored for an extended period, especially in cold climates, drain all liquid from the pump to prevent freezing damage. Store in a dry, protected environment.
6. Laasigbotitusita
Apá yìí fún wa ní ìdáhùn sí àwọn ìṣòro tó wọ́pọ̀. Fún àwọn ìṣòro tí a kò kọ síbí, kan si àwọn òṣìṣẹ́ iṣẹ́ tó péye.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Pump ko bẹrẹ | Ko si ipese agbara Gbona apọju tripped Impeller jammed | Ṣayẹwo asopọ agbara ati fifọ Circuit Allow motor to cool, check for cause of overload Disconnect power, clear obstruction from impeller |
| Pump runs but no water flow or low flow | Air in pump/piping Discharge pipe blocked Impeller worn or blocked Fifa ko ni kikun sinu omi | Bleed air from system Ko ìdènà kuro Disconnect power, inspect and clean impeller Ensure pump is adequately submerged |
| Pump makes excessive noise | Cavitation (air in liquid) Wíwọ aṣọ ìbora Foreign object in pump | Ensure adequate liquid supply, check for leaks in suction Kan si oṣiṣẹ iṣẹ ti o peye Disconnect power, inspect and remove object |
| Pump trips circuit breaker | Itanna itanna Apọju mọto Impeller jammed | Kan si alagbawo ẹrọ itanna kan Check for blockages, ensure pump is not running dry Disconnect power, clear obstruction |
7. Awọn pato
Technical data for the Pedrollo MC 40/50-F Electric Pump:
- Awoṣe: MC 40/50-F
- Brand: Pedrollo
- Agbara: 4HP
- Voltage: 400V
- Igbohunsafẹfẹ: 50Hz
- Omi Iru: Sewage, waste water, mixed mud water, groundwater
- Orisi Impeller: BICANALE
- Ohun elo: Simẹnti Irin
- Ìwọ̀n Nkan: 52.7 kg
- Olupese: PEDROLLO
- ASIN: B07HMSHMJT
- Akọkọ Wa: Oṣu Kẹsan 28, ọdun 2018
8. Atilẹyin ọja ati Support
For warranty information, please refer to the documentation provided with your purchase or contact your authorized Pedrollo dealer. For technical support or spare parts, please contact Pedrollo customer service or your local distributor. Ensure you have your pump's model number (MC 40/50-F) and serial number (if applicable) ready when contacting support.
O le wa alaye siwaju sii ati awọn alaye olubasọrọ lori osise naa Pedrollo webojula.
