Ìwé Ìtọ́ni fún Síkẹ́ẹ̀tì Ìrìnàjò Pípà EV Rider

1. Ọja Ipariview

The EV Rider Folding Travel Transport Mobility Scooter is designed for individuals seeking a lightweight, portable, and easy-to-store mobility solution. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

Awọn ẹya pataki:

• Ìwọ̀n Ìwọ̀n Ńlá: Weighs 42 pounds with the 11.5Ah rechargeable lithium-ion battery.
• Manual Fold: Designed for easy manual folding and unfolding, making it suitable for travel on trains, planes, and cruise ships.
• Apẹrẹ Iwapọ: Dimensions of 17.3 x 16.5 x 28.7 inches (folded) allow for easy storage in most automobile trunks and tight spaces.
• Rọọsi Yiyi Nipọn: Features a 31-inch turning radius for easy maneuverability in confined areas.
• Agbara giga: Achieves a maximum speed of 3.8 mph and offers a drive range of up to 10 miles.
• Awọn ẹya Aabo: Equipped with puncture-proof tires, an LED headlight, a height-adjustable tiller, key ignition, and dual-hand two-way throttle control.

Figure 1: The EV Rider Folding Travel Transport Mobility Scooter in its unfolded, ready-to-use state.

2. Alaye Aabo

Read all instructions and safety warnings before operating the scooter. Failure to follow instructions may result in injury or damage to the scooter.

Awọn Itọsọna Aabo Gbogbogbo:

• Always ensure the scooter is fully unfolded and locked into position before use.
• Familiarize yourself with all controls, including the throttle, brakes, and speed adjustment.
• Do not operate the scooter under the influence of alcohol or medication that may impair your judgment.
• Nigbagbogbo ṣetọju iyara ailewu ati ki o mọ awọn agbegbe rẹ.
• Yẹra fún dídúró tàbí yíyípo lójijì, pàápàá jùlọ ní iyàrá gíga.
• Ensure the on-seat sensor is engaged for operation. The scooter will not move if the seat is not occupied.

Awọn ẹya ara ẹrọ Aabo:

• Puncture-Proof Tires: Reduces the risk of flats and ensures reliable travel.
• Imọlẹ ina LED: Enhances visibility during low-light conditions.
• Electromagnetic Brake: Provides smooth and immediate stopping power when the throttle is released.
• Anti-Rollover Device: Designed to enhance stability and prevent tipping.

3. Eto ati Apejọ

The EV Rider Folding Travel Transport Mobility Scooter comes mostly pre-assembled. Follow these steps to prepare your scooter for first use.

Unboxing ati Ayẹwo Ibẹrẹ:

1. Fara yọ awọn ẹlẹsẹ ati gbogbo awọn paati lati apoti.
2. Inspect all parts for any signs of damage. Contact customer support if any damage is found.
3. Ensure all listed components are present: main scooter body, seat, armrests, front basket, rear basket, battery, charger, keys, and user manual.

Ṣíṣí Scooter náà:

1. Gbé scooter tí a ti dì náà sí orí ilẹ̀ tí ó tẹ́jú, tí ó sì dúró ṣinṣin.
2. Pull the tiller (handlebar pole) upwards until it locks into its upright position. Secure any folding mechanisms as indicated.
3. Lift the seat assembly until it clicks into place.

Awọn Ẹya ara ẹrọ So:

1. Awọn apa ọwọ: Attach the armrests to the sides of the seat frame using the provided screws. Ensure they are securely fastened. The armrests can be raised for easier access.
2. Awọn agbọn: The front basket typically slides onto a mounting bracket on the tiller. The rear basket attaches to the back of the seat assembly.

Figure 2: The scooter's control panel, including the key ignition and speed adjustment knob.

Fifi sori batiri ati gbigba agbara:

1. Locate the battery compartment, usually under the seat or footboard.
2. Insert the 11.5Ah lithium-ion battery, ensuring it is properly seated and connected.
3. Connect the charger to the charging port on the scooter and then to a standard wall outlet. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged).
4. Allow the battery to fully charge before first use (typically 6-8 hours).

4. Awọn ilana Iṣiṣẹ

Bibẹrẹ Scooter:

1. Fi kọ́kọ́rọ́ náà sínú iná náà kí o sì yí i sí ipò 'ON'.
2. Ensure you are seated properly on the scooter. The on-seat sensor must be engaged for the scooter to operate.

Wiwakọ ati Itọsọna:

• Iṣakoso Fifun: Use the dual-hand two-way throttle levers on the tiller to move forward or backward. Push forward for forward motion, pull back for reverse.
• Itọnisọna: Turn the tiller left or right to steer the scooter.
• Braking: Release the throttle levers to engage the electromagnetic brake, bringing the scooter to a smooth stop.

Titunṣe Iyara:

• Use the speed adjustment knob on the control panel to select your desired speed setting (e.g., low, medium, high).
• Adjust the speed according to terrain and comfort level.

Ipo Ririn:

• Some models may feature a 'Walk' mode on the speed adjustment knob, allowing the scooter to move at a very slow pace, ideal for walking alongside it.

Awọn ẹya afikun:

• Imọlẹ ina LED: Press the headlight button on the control panel to turn the LED headlight on or off.
• Ìwo: Press the horn button to alert others.
• Ibudo Gbigba agbara USB: A convenient USB port is available on the tiller for charging mobile devices.

5. Itọju

Regular maintenance ensures the longevity and optimal performance of your EV Rider Mobility Scooter.

Itọju Batiri:

• Always charge the lithium-ion battery fully after each use.
• Yago fun gbigbe batiri naa patapata, nitori eyi le dinku igbesi aye rẹ.
• Store the scooter in a cool, dry place when not in use, and ensure the battery is charged.

Itọju Taya:

• The scooter is equipped with puncture-proof tires, reducing the need for frequent air pressure checks.
• Regularly inspect tires for wear and tear or embedded debris.

Isọsọ gbogboogbo:

• Pa ẹlẹsẹ-awọ kuro pẹlu ipolowoamp asọ lati yọ eruku ati idoti.
• Yẹra fun lilo awọn kẹmika lile tabi awọn afọmọ abrasive.
• Jẹ́ kí gbogbo àwọn ohun èlò iná mànàmáná gbẹ.

6. Laasigbotitusita

If you encounter any issues with your scooter, refer to the following common problems and solutions:

• Scooter does not turn on: Ensure the key is fully inserted and turned to the 'ON' position. Check if the battery is charged and properly connected.
• Scooter does not move: Verify that you are seated correctly, engaging the on-seat sensor. Check if the electromagnetic brake is disengaged (by applying throttle). Ensure the speed setting is not on 'Park' or 'Neutral' if applicable.
• Iwọn ti o dinku tabi agbara: The battery may need charging or its capacity might be reduced due to age. Ensure the charger is functioning correctly.
• Awọn ariwo ti ko wọpọ: Stop using the scooter immediately and inspect for loose parts or obstructions. Contact customer support if the issue persists.

7. Awọn pato

Figure 3: Key dimensions of the scooter for reference.

8. Atilẹyin ọja ati Support

For any questions, technical assistance, or warranty claims, please contact customer support. Keep your purchase receipt and product information handy.

Ilana Pada:

Ọjà yìí lè padà títí di ọjọ́ kọkànlélọ́gbọ̀n oṣù kìíní, ọdún 2026. Jọ̀wọ́ wo ìlànà ìdápadà oníṣòwò fún àwọn ìtọ́ni tó kún rẹ́rẹ́.

AlAIgBA Ofin:

Awọn alaye nipa awọn afikun ijẹunjẹ ko ti ni iṣiro nipasẹ FDA ati pe ko ṣe ipinnu lati ṣe iwadii, tọju, wosan, tabi ṣe idiwọ eyikeyi aisan tabi ipo ilera.