Brock Electronics WM-3002-BK Professional Electric Waffle Iron

Ọja Pariview

The Brock Electronics WM-3002-BK is a professional electric waffle iron designed for home use. It features a 19.2 cm diameter non-stick cooking surface, capable of dividing waffle dough for 5 portions at once. With 750W of power, it ensures efficient and quick waffle preparation. The appliance includes heat insulation on the handle and body for safe operation, non-slip feet for stability, and indicator lights for ignition and baking readiness.

This image displays the Brock Electronics WM-3002-BK Professional Electric Waffle Iron in its closed position. The top features a silver-colored panel with a black control dial marked from 1 to 6, likely for temperature or browning settings. Below the dial, there are two indicator lights, one red for power/ignition and one green for readiness to bake. The main body of the waffle iron is black, with a sleek, rounded design.

Awọn Itọsọna Aabo pataki

• Ka gbogbo awọn ilana ṣaaju lilo ohun elo naa.
• Maṣe fi ọwọ kan awọn aaye ti o gbona. Lo awọn ọwọ tabi awọn koko.
• Lati daabobo lodi si mọnamọna itanna, maṣe fi okun, pilogi, tabi ohun elo bọ inu omi tabi omi miiran.
• Abojuto sunmọ jẹ pataki nigbati eyikeyi ohun elo ba lo nipasẹ tabi sunmọ awọn ọmọde.
• Yọọ kuro lati inu iṣan nigbati ko si ni lilo ati ṣaaju ṣiṣe mimọ. Gba laaye lati tutu ṣaaju fifi sii tabi mu awọn ẹya kuro, ati ṣaaju ki o to nu ohun elo naa.
• Ma ṣe ṣiṣẹ ohun elo eyikeyi pẹlu okun ti o bajẹ tabi pulọọgi tabi lẹhin aṣiṣe ohun elo tabi ti bajẹ ni eyikeyi ọna.
• Lilo awọn asomọ ẹya ẹrọ ti a ko ṣeduro nipasẹ olupese ohun elo le fa awọn ipalara.
• Maṣe lo ni ita.
• Ma ṣe jẹ ki okun duro lori eti tabili tabi counter, tabi fi ọwọ kan awọn aaye ti o gbona.
• Ma ṣe gbe sori tabi sunmọ gaasi ti o gbona tabi ina ina, tabi ni adiro ti o gbona.
• Išọra to gaju gbọdọ ṣee lo nigba gbigbe ohun elo ti o ni epo gbona tabi awọn olomi gbona miiran.
• Nigbagbogbo so plug to ohun elo akọkọ, ki o si pulọọgi okun sinu ogiri iṣan. Lati ge asopọ, tan eyikeyi iṣakoso si “pa”, lẹhinna yọ plug kuro ni iṣan ogiri.
• Ma ṣe lo ohun elo fun miiran ju lilo ti a pinnu lọ.
• This appliance is equipped with overheating protection for your safety.

Ṣeto

1. Ṣii silẹ: Carefully remove the waffle iron from its packaging. Retain packaging for future storage or transport.
2. Lilo Ni akọkọ Isọgbẹ: Kí o tó lo ó fún ìgbà àkọ́kọ́, fi ìpolówó nu àwọn àwo ìse tí kò lẹ̀ mọ́.amp cloth or sponge. Dry thoroughly. A light coating of cooking oil can be applied to the plates for the very first use to season them, though the non-stick surface is designed to minimize this need.
3. Ibi: Place the waffle iron on a stable, flat, heat-resistant surface. Ensure there is adequate space around the appliance for ventilation. The non-slip feet will help secure the unit in place.
4. Asopọ agbara: Ensure the appliance is unplugged. Unwind the power cord and plug it into a standard 240V electrical outlet.

Awọn ilana Iṣiṣẹ

1. Gbigbona ṣaaju: Close the waffle iron and plug it into the power outlet. The red ignition indicator light will illuminate, indicating the appliance is powered on and beginning to heat.
2. Atọka ti o ti ṣetan: Once the waffle iron reaches the optimal baking temperature, the green baking ready indicator light will illuminate. This signifies that the appliance is preheated and ready for use.
3. Iṣakoso iwọn otutu: Use the control dial on the top panel to adjust the desired browning level (settings 1-6). A higher number typically results in a darker, crispier waffle.
4. Batiri Ntu: Carefully open the waffle iron using the heat-insulated handle. Pour your prepared waffle batter evenly onto the lower cooking plate. Do not overfill, as the batter will expand during cooking. The 19.2 cm diameter plate is designed to divide the batter for 5 waffles.
5. Sise: Close the lid gently. The red ignition light may cycle on and off during baking to maintain the temperature.
6. Yiyọ awọn Waffles: Baking time will vary depending on the recipe and desired browning. Once cooked, use a heat-resistant plastic or wooden utensil to carefully remove the waffles. Avoid using metal utensils, as they can damage the non-stick coating.
7. Subsequent Batches: Close the lid after removing waffles. Wait for the green ready indicator light to illuminate again before adding more batter for subsequent batches.
8. Ipari: When finished baking, unplug the waffle iron from the power outlet.

Itọju ati Cleaning

Proper maintenance ensures the longevity and performance of your waffle iron.

1. Fara bale: Always allow the waffle iron to cool completely before cleaning.
2. Yọọ: Rii daju pe ohun elo ti yọ kuro lati inu iṣan agbara ṣaaju ṣiṣe mimọ.
3. Àwọn Àwo Ìmọ́tótó: Mu awọn awo sise ti kii ṣe igi nu pẹlu ipolowoamp cloth or sponge. For stubborn residue, a small amount of mild dish soap can be used, but ensure it is thoroughly rinsed off with a damp asọ. Ma ṣe lo awọn olutọpa abrasive, awọn paadi iyẹfun, tabi awọn ohun elo irin, nitori iwọnyi yoo ba ibora ti kii ṣe igi jẹ.
4. Ìwẹ̀nùmọ́ Òde: Wipe the exterior of the waffle iron with a soft, damp asọ. Maṣe lo awọn kẹmika lile tabi awọn ohun elo abrasive.
5. Maṣe Fi omi mọlẹ: Never immerse the waffle iron, its cord, or plug in water or any other liquid.
6. Ibi ipamọ: Once clean and dry, store the waffle iron in a cool, dry place.

Laasigbotitusita

• Ohun elo naa ko gbona:
  • Rii daju pe okun agbara ti wa ni edidi ni aabo sinu iṣan itanna ti n ṣiṣẹ.
  • Check if the power outlet is functioning by plugging in another appliance.
• Waffles stick to the plates:
  • Ensure the plates were clean and dry before use.
  • Apply a very light coating of cooking oil or non-stick spray to the plates before each batch, especially if using a new recipe.
  • Ensure the waffle iron is fully preheated (green light on) before adding batter.
• Waffles are not evenly browned:
  • Ensure the batter is evenly spread across the plate.
  • Adjust the temperature control dial to a higher setting for darker browning.
  • Allow sufficient preheating time.
• Awọn ina ifihan agbara ko ṣiṣẹ:
  • If the appliance is not heating and lights are off, check power connection.
  • If the appliance heats but lights are off, contact customer support.

Awọn pato

Atilẹyin ọja ati Support

Brock Electronics products are manufactured to high-quality standards. For any issues, questions, or warranty claims, please contact Brock Electronics customer support. Keep your purchase receipt as proof of purchase for warranty purposes.

For further assistance, please refer to the contact information provided on the official Brock Electronics webaaye tabi apoti ọja rẹ.