1. Ifihan
This manual provides comprehensive instructions for the Behringer SUPER-X PRO CX2310, a high-precision stereo 2-way/mono 3-way crossover with a dedicated subwoofer output. Designed for professional audio applications, this device accurately divides audio signals into different frequency bands, optimizing sound reproduction through multiple loudspeakers.
The CX2310 ensures precise frequency separation, allowing each speaker component (e.g., woofers, mid-range drivers, tweeters, subwoofers) to receive only the frequencies it is designed to reproduce efficiently. This results in improved sound clarity, increased system efficiency, and enhanced speaker protection.
olusin 1: Angled iwaju view of the Behringer SUPER-X PRO CX2310 crossover.
2. Awọn Ilana Aabo pataki
Before operating the CX2310, please read and adhere to the following safety guidelines:
- Ibi ti ina elekitiriki ti nwa: Connect the unit only to the specified mains voltage. Ensure the power cord is undamaged and properly grounded.
- Ọrinrin: Do not expose the unit to rain or moisture. Avoid placing liquid-filled objects on the device.
- Afẹfẹ: Rii daju pe fentilesonu to peye. Ma ṣe dina awọn ṣiṣi atẹgun.
- Ooru: Do not place the unit near heat sources such as radiators, heat registers, or other heat-producing appliances.
- Ṣiṣẹ: Ma ṣe gbiyanju lati ṣe iṣẹ fun ẹyọkan funrararẹ. Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye.
- Ninu: Mọ pẹlu asọ gbigbẹ nikan.
3. Key Awọn ẹya ara ẹrọ
The Behringer SUPER-X PRO CX2310 offers a range of features for precise audio signal processing:
- Awọn ọna ṣiṣe: Configurable for stereo 2-way or mono 3-way operation.
- Iṣẹjade Subwoofer: Dedicated mono subwoofer output with independent frequency control.
- Awọn Ajọ Ikọja: State-variable 24 dB/octave Linkwitz-Riley filters for precise frequency separation.
- Individual Mute Switches: Each output features a mute switch for easy system adjustment and troubleshooting.
- Iṣakoso Gbigbawọle: Adjustable input gain for level matching.
- Output Level Controls: Independent level controls for all outputs.
- Phase Invert Switches: Phase invert switches on all outputs for flexible system alignment.
- Awọn itọkasi LED: Clear LED indicators for input clip, mode selection, and output levels.
- Awọn asopọ: Balanced XLR inputs and outputs for professional connectivity.
4. Awọn iṣakoso ati Awọn asopọ
4.1. Awọn iṣakoso nronu iwaju
olusin 2: Iwaju nronu loriview of the CX2310.
- ERE iwọle: Ṣe atunṣe ifamọ igbewọle fun ikanni oniwun.
- LED CLIP: Illuminates when the input signal is clipping. Reduce input gain if this LED lights up frequently.
- OGUN kekere: Activates a high-pass filter to remove unwanted low frequencies.
- XOVER FREQ (LOW/HIGH): Sets the crossover frequency between the low and high outputs for stereo 2-way mode, or low and mid outputs for mono 3-way mode.
- XOVER FREQ (MID/HIGH): Sets the crossover frequency between the mid and high outputs for mono 3-way mode.
- LOW OUTPUT LEVEL: Adjusts the output level for the low-frequency band.
- HIGH OUTPUT LEVEL: Adjusts the output level for the high-frequency band.
- MID OUTPUT LEVEL: Adjusts the output level for the mid-frequency band (mono 3-way mode only).
- MUTE BUTTONS: Silences the corresponding output for system tuning.
- PHASE INVERT: Inverts the phase of the corresponding output signal.
- Iyipada Iyipada: Selects between STEREO 2-WAY and MONO 3-WAY operation.
- SUBWOOFER FREQ: Sets the crossover frequency for the dedicated subwoofer output.
- SUBWOOFER GAIN: Ṣe àtúnṣe ipele ìjáde fún subwoofer.
- AGBARA Yipada: Yipada ẹyọ naa tan tabi pa.
4.2. Ru Panel Connectors
olusin 3: Ru nronu loriview of the CX2310.
- AC igbewọle: Standard IEC connector for the mains power cable.
- INPUT L/R: Balanced XLR inputs for the stereo audio signal.
- LOW OUTPUT L/R: Balanced XLR outputs for the low-frequency signal.
- MID OUTPUT L/R: Balanced XLR outputs for the mid-frequency signal (mono 3-way mode only).
- HIGH OUTPUT L/R: Balanced XLR outputs for the high-frequency signal.
- ṢE ṢE ṢE: Balanced XLR output for the mono subwoofer signal.
5. Eto ati Asopọ
Proper setup is essential for optimal performance. Always ensure all audio equipment is powered off before making connections.
5.1. Stereo 2-Way Operation
This configuration is suitable for systems with main stereo speakers and an optional subwoofer.
- Connect the stereo output of your mixer or audio source to the ÀKÚN L ati ÀKÚN R XLR connectors on the CX2310 rear panel.
- Ṣeto awọn MODE switch on the front panel to STEREO 2-WAY.
- Sopọ awọn LOW OUTPUT L/R to the inputs of your low-frequency amplifier (e.g., for woofers).
- Sopọ awọn HIGH OUTPUT L/R to the inputs of your high-frequency amplifier (e.g., for tweeters/mid-range).
- If using a subwoofer, connect the KURO NIPA to the input of your subwoofer amplifier tabi subwoofer ti n ṣiṣẹ.
- So okun agbara pọ si AC INPUT and then to a suitable power outlet.
5.2. Mono 3-Way Operation
This configuration is ideal for a single, full-range speaker system divided into low, mid, and high frequency bands.
- Connect a mono audio source to the ÀKÚN L XLR connector. (The CX2310 will sum the inputs for mono 3-way operation if both are connected, or use only the left input if only one is present).
- Ṣeto awọn MODE switch on the front panel to MONO 3-WAY.
- Sopọ awọn LOW OUTPUT L to the input of your low-frequency amplifier.
- Sopọ awọn MID OUTPUT L to the input of your mid-frequency amplifier.
- Sopọ awọn HIGH OUTPUT L to the input of your high-frequency amplifier.
- If using a subwoofer, connect the KURO NIPA to the input of your subwoofer amplifier tabi subwoofer ti n ṣiṣẹ.
- So okun agbara pọ si AC INPUT and then to a suitable power outlet.
6. Awọn ilana Iṣiṣẹ
Once connected, follow these steps to configure and operate your CX2310:
- Agbara Tan: Turn on all connected amplifiers and then the CX2310. When powering down, turn off the CX2310 first, then the ampalifiers.
- Awọn Eto Ibẹrẹ: Ṣeto gbogbo rẹ Wiwọle ere ati IPELU JADE controls to their center (0 dB) position. Set crossover frequencies to a starting point recommended by your speaker manufacturer, or a common value like 100 Hz for low/high and 2 kHz for mid/high.
- Input Level Adjustment: Play an audio signal through your system. Adjust the Wiwọle ere until the signal is strong but the LED CLIP only flashes occasionally on peaks.
- Crossover Frequency Adjustment: Ṣàtúnṣe pẹ̀lú ìṣọ́ra XOVER FREQ controls to achieve the desired frequency separation. Listen for smooth transitions between frequency bands.
- Atunse Ipele Ijade: Lo ẹni kọọkan IPELU JADE controls to balance the volume of each frequency band. The IKU buttons can be used to isolate bands for easier adjustment.
- Ijọpọ Subwoofer: Ṣatunṣe awọn SUBWOOFER FREQ ati SUBWOOFER GAIN controls to blend the subwoofer output seamlessly with the main speakers.
- Ìtòlẹ́sẹẹsẹ Ìpele: Ṣe idanwo pẹlu IPILE IPADA switches if you notice phase cancellation or an unnatural sound. This helps ensure all speakers are working in phase.
7. Itọju
The Behringer CX2310 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:
- Ninu: Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid abrasive cleaners or solvents.
- Ayika: Operate the unit in a clean, dry environment. Avoid excessive dust, humidity, and extreme temperatures.
- Afẹfẹ: Rii daju pe awọn iho atẹgun ko ni idilọwọ lati ṣe idiwọ igbona.
- Ibi ipamọ: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place, preferably in its original packaging.
8. Laasigbotitusita
If you encounter issues with your CX2310, consult the following table before contacting support:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No sound from any output. | Unit not powered on; incorrect connections; input gain too low; all outputs muted. | Check power cable and switch; verify all XLR connections; increase input gain; ensure mute buttons are disengaged. |
| No sound from a specific output. | Output muted; output level too low; incorrect mode selection. | Check the specific output's mute button; increase output level; verify correct 2-way/3-way mode. |
| Ohun ti o daru. | Input signal too high (clipping); output signal too high. | Reduce input gain if CLIP LED is constantly lit; reduce output levels. |
| Hum tabi ariwo. | Ground loop; unbalanced cables; faulty cables. | Ensure all equipment is properly grounded; use balanced XLR cables; test with different cables. |
| Subwoofer not working. | Subwoofer output muted; subwoofer gain too low; incorrect frequency setting. | Check subwoofer mute button; increase subwoofer gain; adjust subwoofer frequency control. |
9. Awọn pato
Technical specifications for the Behringer SUPER-X PRO CX2310:
- Ìwọ̀n Nkan: 7.5 iwon
- Awọn iwọn ọja: 19 x 1.75 x 8.46 inches
- Orisi Asopọmọra: XLR
- Ni wiwo Hardware: 1/4-inch Audio (Note: Product images show XLR, specification might be generic or refer to internal components)
- Ọna kika Ifihan: Analog
- Orisun Agbara: Okun Itanna
- Voltage: 9 Volts (Internal operating voltage, not mains input)
- Awọn Ajọ Ikọja: Linkwitz-Riley, 24 dB/octave
Figure 4: Silhouette illustrating the dimensions of the CX2310.
10. Atilẹyin ọja ati Support
The Behringer SUPER-X PRO CX2310 comes with a standard 1-year limited warranty. Users can extend this warranty to 3 years by registering their product online within 90 days of purchase. For detailed warranty terms and conditions, please refer to the official Behringer webojula.
For technical support, service, or further inquiries, please visit the official Behringer support page or contact their customer service department. Keep your purchase receipt and product serial number readily available when seeking support.
Fun alaye diẹ sii, ṣabẹwo si Behringer Official Webojula.
