Brock Electronics BMS-2001-BK Electric Shaver

1. Ifihan

Thank you for choosing the Brock Electronics BMS-2001-BK Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new shaver. Please read it thoroughly before first use and keep it for future reference.

An image showing the Brock Electronics BMS-2001-BK electric shaver. It features a sleek black and silver design with three rotary shaving heads visible at the top. Below the heads, there's a power button and indicators for 'WORK' and 'CHARGE'. The brand 'BROCK Electronics' is visible at the bottom.

The Brock Electronics BMS-2001-BK is an advanced electric shaver designed for men, featuring a triple-head system with a double lifting mechanism for a close and comfortable shave. It supports both dry and wet shaving and includes a convenient pop-up trimmer for precise detailing.

2. Awọn Ilana Aabo pataki

To reduce the risk of burns, electrocution, fire, or injury to persons, please observe the following safety precautions:

• Do not immerse the charging adapter in water or other liquids.
• Always unplug the shaver from the power outlet immediately after charging and before cleaning.
• Do not use the shaver while bathing or in the shower if it is connected to the charging adapter.
• Keep the charging adapter away from heated surfaces.
• Do not operate the shaver with a damaged cord or plug, or if it malfunctions or has been dropped or damaged.
• Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn.
• Awọn ọmọde yẹ ki o wa ni abojuto lati rii daju pe wọn ko ṣere pẹlu ohun elo naa.
• Lo ọja yi nikan fun lilo ile ti a pinnu rẹ gẹgẹbi a ti ṣalaye ninu iwe afọwọkọ yii.
• Ma ṣe lo awọn asomọ ti olupese ko ṣeduro.
• Maṣe ju silẹ tabi fi ohunkan sinu ṣiṣi eyikeyi.
• Store the shaver in a dry place.

3. Package Awọn akoonu

Jọwọ ṣayẹwo package fun awọn nkan wọnyi:

• Brock Electronics BMS-2001-BK Electric Shaver
• Fila Idaabobo
• Fifọ Fẹlẹ
• Ngba agbara Adapter
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Awọn ẹya Ọja

• Triple Head System: Equipped with three independent rotary shaving heads for maximum coverage and flexibility.
• Double Lifting System: Designed to lift hairs for a closer, more efficient shave.
• Iṣẹ́ Tí Ó Rọ & Gbẹ: Suitable for comfortable dry shaving or refreshing wet shaving with foam or gel.
• Agbejade Agbejade: Integrated trimmer for precise sideburns, mustache, and beard detailing.
• Akoko Iṣiṣẹ pipẹ: Pese to awọn iṣẹju 80 ti irun-ailokun lori idiyele ni kikun.
• Batiri gbigba agbara: Convenient cordless operation with a built-in rechargeable battery.

5. Eto

5.1 Gbigba agbara akọkọ

1. Before first use, fully charge the shaver for approximately 8 hours.
2. Ensure the shaver is switched OFF.
3. Connect the charging adapter to the shaver's charging port.
4. Plug the adapter into a suitable electrical outlet. The "CHARGE" indicator light will illuminate.
5. Once fully charged, unplug the adapter from the outlet and then from the shaver.

Akiyesi: For optimal battery life, allow the shaver to fully discharge before recharging, and avoid overcharging.

6. Awọn ilana Iṣiṣẹ

6.1 Irun

1. Ensure your face is clean. For dry shaving, ensure your skin is completely dry. For wet shaving, apply shaving foam or gel.
2. Press the power button to turn the shaver ON. The "WORK" indicator light will illuminate.
3. Mu ohun irun naa ni igun ọtun (awọn iwọn 90) si awọ ara rẹ.
4. Gbe irun naa ni kekere, awọn iṣipopada ipin si itọsọna ti idagbasoke irun.
5. Apply gentle pressure; do not press too hard.
6. After shaving, press the power button again to turn the shaver OFF.

6.2 Lilo Agbejade Trimmer

1. Locate the pop-up trimmer switch on the back of the shaver.
2. Slide the switch upwards to engage the trimmer.
3. Use the trimmer for shaping sideburns, mustaches, or for precise detailing.
4. Lẹ́yìn lílò, gbé ìyípadà náà sí ìsàlẹ̀ láti fa ìtẹ̀ náà sẹ́yìn.

7. Itọju ati Cleaning

Ṣiṣe mimọ nigbagbogbo ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati fa igbesi aye irun ori rẹ fa.

7.1 Daily Cleaning (Dry Shaving)

1. Turn off the shaver and unplug it if connected to power.
2. Remove the shaving head assembly by gently pulling it upwards.
3. Use the provided cleaning brush to brush away hair clippings from the shaving heads and the hair chamber.
4. Do not use the brush on the foil parts, as this may damage them.
5. Replace the shaving head assembly.

7.2 Rinsing (Wet Shaving or Deep Clean)

1. Turn off the shaver and unplug it from the charging adapter.
2. Hold the shaver head under warm running water to rinse away foam or gel residue and hair clippings.
3. For a more thorough clean, you can remove the shaving head assembly and rinse it separately under running water.
4. Allow the shaver and head assembly to air dry completely before reattaching and storing.

7.3 Ibi ipamọ

Store the shaver in a cool, dry place, away from direct sunlight and extreme temperatures. Always use the protective cap when storing or traveling to protect the shaving heads.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

Brock Electronics is committed to providing high-quality products. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Brock Electronics webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

For further assistance, you may contact Brock Electronics customer service through their official channels.