Ibi ina ina ilẹ gidi ti o ni ina 59" pẹlu Mantel - Iwe itọsọna

Ọrọ Iṣaaju

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Real Flame Beau 59" Landscape Electric Fireplace with Mantel. Please read all instructions carefully before use and retain this manual for future reference.

Alaye Aabo pataki

• Do not place a television directly on top of the mantel. The mantel supports up to 30 lbs.
• Ensure the fireplace is plugged into a standard three-prong outlet.
• Pa awọn ohun elo ti o le jona ni o kere ju ẹsẹ mẹta (0.9 mita) kuro ni iwaju ina naa.
• This appliance is equipped with an automatic safety shut-off feature to prevent overheating.
• Ẹ̀rọ ààbò tí ó lè dènà ìdènà ìbòjú wà nínú rẹ̀, ó sì gbọ́dọ̀ wà níbẹ̀ láti dènà ìdènà tí kò bá ṣẹlẹ̀.

Image: The Real Flame Beau Electric Fireplace shown with a television mounted above it, demonstrating the recommended setup where the TV is not placed directly on the mantel.

Eto ati Apejọ

Assembly of the Real Flame Beau Electric Fireplace is required. It is recommended that two adults perform the assembly. The unit ships in two boxes.

1. Unpacking ati ayewo

• Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
• Inspect all parts for any damage. Contact customer support immediately if any damage is found.
• Ensure all hardware and components listed in the packing list are present.

2. Apejọ Igbesẹ

• Lay out all pieces and hardware in the intended assembly area.
• Follow the detailed assembly instructions provided in the separate assembly guide (not included in this manual). An Allen wrench is typically the only tool necessary for mantel assembly.
• Once the mantel is assembled, carefully slide the electric firebox insert into the designated opening from the rear.
• Secure the firebox with the provided wood screws. A drill and screwdriver may be required for this step.

3. Placement and Power Connection

• Place the assembled fireplace on a flat, stable surface.
• Ensure the unit is positioned near a standard three-prong electrical outlet. The power cord is 6 feet long with a lay-flat plug.
• Install the anti-topple safety device as per the assembly guide to secure the unit to a wall stud.

Image: A diagram illustrating the dimensions (58.5" W x 11.5" D x 42" H) and assembled weight (123 lbs) of the Real Flame Beau Electric Fireplace, along with icons indicating it ships in 2 boxes and requires assembly.

Awọn ilana Iṣiṣẹ

The Real Flame Beau Electric Fireplace can be operated using the touch controls on the unit or the included remote control.

1. Agbara Tan / Paa

• Tẹ bọtini agbara lori nronu iṣakoso tabi latọna jijin lati tan tabi pa ẹrọ naa.

2. Flame Effect Adjustment

The fireplace features realistic flames with six color options and five brightness levels.

• Use the flame color button to cycle through the six available flame colors.
• Use the flame brightness buttons to adjust the intensity of the flame effect.

Image: A collage of six images demonstrating the various flame color options available on the Real Flame electric fireplace, including shades of orange, red, white, blue, and a multi-color setting.

3. Heater Function

The replaceable electric fireplace heater insert provides supplemental heat for areas up to 1,000 sq ft with a heat output of 5100 BTUs.

• Press the heater button to activate the heating function.
• Use the thermostat controls to set your desired room temperature. The heater will cycle on and off to maintain this temperature.
• To enjoy the ambiance without heat, turn off the heater function while keeping the flame effect active.

4. Iṣẹ Aago

• Activate the timer function to set the fireplace to automatically turn off after a specified duration. Refer to the full operating manual for specific timer settings.

Aworan: A alaye view of the electric fireplace insert, highlighting the touch controls, the dynamic glowing embers, and the heat output vent, indicating supplemental heat up to 1,000 sq ft and automatic safety shut-off.

Itoju

Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti ibi ina ina rẹ.

• Ninu: Wipe the exterior surfaces of the mantel and firebox with a clean, soft cloth. Do not use abrasive cleaners or solvents.
• Yiyọ eruku kuro: Periodically dust the air intake and exhaust vents to ensure proper airflow for the heater.
• Rirọpo Boolubu: If the flame effect diminishes, refer to the full operating manual for instructions on replacing the light bulbs within the firebox.

Laasigbotitusita

If you encounter issues with your fireplace, consult the following common troubleshooting steps:

• Ko si Agbara: Ensure the power cord is securely plugged into a working three-prong outlet. Check the circuit breaker.
• Ohun elo itutu ti ko ṣiṣẹ: Verify the thermostat setting is higher than the current room temperature. Check if the automatic safety shut-off has been activated due to overheating; unplug the unit for 15 minutes and try again.
• Flame Effect Not Visible: Check if the unit is powered on and if the flame brightness is set to a visible level.
• Iṣakoso Latọna jijin Ko Dahun: Rọpo awọn batiri ninu iṣakoso latọna jijin. Rii daju pe ko si idena laarin ẹrọ latọna jijin ati sensọ ina.

Fun iranlọwọ siwaju sii, kan si atilẹyin alabara Real Flame.

Awọn pato

Image: Icons indicating the product is CSA Certified, FCC Certified, comes with a 1 Year Limited Warranty, and features Automatic Safety Shut-Off.

Atilẹyin ọja ati Support

Alaye atilẹyin ọja

The Real Flame Beau Electric Fireplace comes with a 90-ọjọ atilẹyin ọjaNi afikun, a ọkan-odun lopin atilẹyin ọja is provided for the product. Please retain your proof of purchase for warranty claims.

Onibara Support

For technical assistance, replacement parts, or warranty inquiries, please contact Real Flame customer support. Refer to the contact information provided with your product packaging or visit the official Real Flame webojula.