1. Ifihan
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. Awọn Ilana Aabo pataki
- Orisun Agbara: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- Afẹfẹ: Rii daju pe fentilesonu to peye. Ma ṣe dina awọn ṣiṣi atẹgun.
- Omi ati Ọrinrin: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- Ṣiṣẹ: Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye. Maṣe gbiyanju lati ṣe iṣẹ ọja yii funrararẹ.
- Awọn kebulu: Use only high-quality, shielded cables for all audio connections to prevent interference.
- Ilẹ: Ọja yii gbọdọ wa ni ilẹ.
- Ninu: Mọ pẹlu asọ gbigbẹ nikan.
3. Eto Itọsọna
3.1 Unpacking ati ayewo
Ṣọra kuro ninu apoti naa ampkí o sì ṣe àyẹ̀wò rẹ̀ fún àwọn àmì ìbàjẹ́ nígbà ìrìnàjò. Tí a bá rí ìbàjẹ́, kan sí oníṣòwò rẹ lẹ́sẹ̀kẹsẹ̀.
3.2 Ibi
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 Awọn isopọ
- Asopọ agbara: So okùn agbara AC ti a pese pọ mọ amplifier's power inlet and then to a suitable grounded power outlet.
- Awọn isopọ ti nwọle: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- Awọn isopọ Iṣjade: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
olusin 2: Angled view of the Behringer NX6000D Power Amplifier, highlighting its compact design.
4. Awọn ilana Iṣiṣẹ
4.1 Titan / Pa a
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 Iwaju Panel idari
- Level Controls (CH A, CH B): Ṣàtúnṣe ipele ìjáde fún ikanni kọ̀ọ̀kan.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- Ifihan LCD: Shows current settings, DSP parameters, and status.
- Bọtini SETUP: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- Kokoro koodu: Ó ń lo àwọn àkójọ oúnjẹ láti ṣe àtúnṣe àwọn iye paramita.
- Bọtini Ijade: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- Idaduro: Adjust signal delay for speaker alignment.
- Adakoja: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- Dynamics Processing: Apply compression or limiting to control dynamic range.
- Eto aabo: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. Itọju
- Ninu: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Afẹfẹ: Regularly check that the ventilation openings are clear of dust and debris.
- Awọn Isopọ USB: Lojoojumọ, ṣayẹwo gbogbo awọn asopọ okun waya fun ibamu to dara ati awọn ami ti o wọ.
- Ibi ipamọ: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| Ko si ohun jade | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| Ohun ti o daru | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches amplifier; test with different speakers. |
| Unit overheats | Afẹfẹ dina; apọju fifuye. | Ensure clear airflow around the unit; reduce output level or load. |
7. Imọ ni pato
- Agbara Ijade: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- Ìwúwo: Less than 13.2 lbs / 6.0 kg
- Awọn iwọn (H x W x D): Isunmọ 3.7 x 19.02 x 12.44 inches (94 x 483 x 316 mm)
- DSP: High-performance DSP with 24-bit/96 kHz converters
- Awọn ẹya DSP: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- Awọn ọna asopọ igbewọle: 2 x XLR/TRS combo jacks
- Awọn Asopọ Ijade: 2 x SpeakON connectors
- Ibi ti ina elekitiriki ti nwa: Ultra-efficient switch-mode power supply
- Itutu: Revolutionary cool-running high-density Class-D technology
- Ohun elo: Irin
- Àwọ̀: Dudu
8. Atilẹyin ọja ati Support
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 Imọ Support
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
Behringer Official Webojula: www.behringer.com
