Ọrọ Iṣaaju
The DÖRR Snapshot Extra Black 12.0I HD Outdoor Box is a robust and versatile trail camera designed for outdoor surveillance and wildlife observation. Featuring a motion sensor and night vision capabilities, it captures high-definition photos and videos in various environmental conditions. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your camera to ensure optimal performance.
Aworan: Iwaju view of the DÖRR Snapshot Extra Black 12.0I HD Outdoor Box, showcasing its camouflage pattern and lens array.
Ṣeto
1. Battery and SD Card Installation
Open the camera housing to access the battery compartment and SD card slot.
- Insert 8x AA batteries (not included) into the designated slots, ensuring correct polarity (+/-).
- Insert a compatible SD card (up to 32GB, Class 10 recommended, not included) into the SD card slot until it clicks into place.
Aworan: Inu view of the camera, displaying the battery compartment on the right and the control panel with screen and buttons on the left.
2. Agbara akọkọ Lori ati Awọn Eto Ipilẹ
After installing batteries and SD card, switch the camera to the "SETUP" position using the switch located inside the housing. The display will turn on.
- Navigate the menu using the directional buttons (UP, DOWN, LEFT, RIGHT) and confirm selections with the "OK" button.
- Ṣeto ọjọ ati akoko lọwọlọwọ.
- Format the SD card (this will erase all data on the card).
3. Iṣagbesori Kamẹra
The camera can be mounted using the included strap or a security box (sold separately).
- Choose a stable location, such as a tree or post, that provides a clear view ti agbegbe ibojuwo ti o fẹ.
- Secure the camera firmly to prevent movement from wind or animals.
- For added security, consider using a metal security box and a padlock.
Image: The camera securely mounted on a tree, enclosed within a protective metal security box and secured with a combination padlock.
Aworan: A sunmọ-soke view of the camera mounted on a tree, showing its camouflage blending with the bark.
Ṣiṣẹ
1. Lilọ kiri Akojọ aṣyn ati Eto
In "SETUP" mode, use the control panel to configure camera settings.
- Ipo: Yan laarin Fọto, Fidio, tabi Fọto+Ipo fidio.
- Ipinnu: Adjust image and video resolution settings.
- PIR ifamọra: Set the sensitivity of the motion sensor (Low, Medium, High) based on the environment and desired detection range.
- Àárín Àkókò Ìfàsẹ́yìn: Define the delay between consecutive triggers.
- Ipari akoko: Enable time-lapse photography for long-term monitoring.
- Iran Alẹ: The camera automatically switches to infrared night vision in low light conditions.
2. Activating Surveillance Mode
Once all settings are configured, switch the camera from "SETUP" to "ON" position. The camera will enter surveillance mode, indicated by a brief LED flash (if enabled) before the screen turns off. The camera is now ready to capture images or videos when motion is detected.
3. Viewing Yaworan Media
Si view captured photos and videos, switch the camera back to "SETUP" mode. Use the "MENU" button to access the playback option. You can browse through files using the navigation buttons.
Itoju
1. Ninu
- Gently wipe the camera lens and PIR sensor window with a soft, lint-free cloth to remove dust, dirt, or moisture.
- Nu ile kamẹra mọ pẹlu ipolowoamp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
2. Iṣakoso batiri
- Check battery levels regularly via the camera's display.
- Replace all batteries simultaneously when they are low to ensure consistent power.
- Yọ awọn batiri kuro ti a ko ba lo kamẹra fun igba pipẹ lati dena jijo.
3. SD Card Management
- Regularly transfer captured media to a computer and format the SD card in the camera to maintain optimal performance and prevent data corruption.
- Ensure the SD card is properly inserted and removed to avoid damage.
Image: The camera positioned on a moss-covered log in a natural outdoor setting, demonstrating its intended use environment.
Laasigbotitusita
| Isoro | Owun to le Fa / Solusan |
|---|---|
| Kamẹra ko ṣiṣẹ. |
|
| Ko si awọn aworan/fidio sile. |
|
| Aworan ti ko dara / didara fidio. |
|
| Aye batiri kukuru. |
|
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | DÖRR |
| Orukọ awoṣe | SnapShot Extra Black 12.0I HD |
| Nọmba awoṣe | 204410 |
| ASIN | B07K7S2LFS |
| Asopọmọra Technology | Ailokun |
| Pataki Ẹya | Sensọ išipopada |
| Awọn ohun elo ti a ṣe iṣeduro | Alẹ Iranran |
| Asogun-ọna iboju ti o han | 5.1 cm (2 inches) |
| Package Mefa | 20.9 x 14.7 x 8.6 cm |
| Iwọn Nkan | 615 giramu |
| Olupese | Dórr |
| Àkọ́kọ́ wà lórí Amazon.de | Oṣu kọkanla ọjọ 6, ọdun 2018 |
Alaye Aabo
- Má ṣe fi kámẹ́rà náà sí ojú otútù tàbí oòrùn tààrà fún ìgbà pípẹ́.
- Jeki kamẹra kuro ni awọn aaye oofa ti o lagbara.
- Ma ṣe gbiyanju lati tu tabi yi kamẹra pada. Eyi yoo sọ atilẹyin ọja di ofo ati pe o le fa ibajẹ.
- Sọ awọn batiri ati awọn paati itanna nu ni ifojusọna ni ibamu si awọn ilana agbegbe.
