Silvercrest SRD 600 B1 Rotary Shaver Instruction Manual

Ọrọ Iṣaaju

This manual provides essential information for the safe and efficient operation of your Silvercrest SRD 600 B1 Rotary Shaver. Please read these instructions carefully before first use and keep them for future reference. This device features a precision cutting system with dual-ring shaving heads and optimal contour adaptation for a comfortable shave.

Alaye Aabo

Ikilọ! Never use the shaver in or near water. Exercise caution when using stainless steel blades to prevent damage. Do not use the shaver for too long or on irritated skin. Use the shaver with caution when connected to power to prevent burns.

Ọja Pariview ati irinše

Familiarize yourself with the various parts of your Silvercrest SRD 600 B1 Rotary Shaver.

Nọmba 1: Iwaju view of the Silvercrest SRD 600 B1 Rotary Shaver, showing the three rotary shaving heads and the power button.

Nọmba 2: Apa view of the shaver, illustrating the integrated fold-out detail trimmer for precise grooming.

Nọmba 3: Close-up of the micro-USB charging port located at the bottom of the shaver for convenient power input.

Nọmba 4: The included power adapter and micro-USB charging cable used to power and recharge the shaver.

Nọmba 5: Iwaju view of the shaver highlighting the Magic-display, which shows battery percentage, cleaning reminder, blade replacement indicator, and travel lock status.

Ṣeto

Ngba agbara si Shaver

1. Connect the micro-USB charging cable to the charging port on the bottom of the shaver (refer to Figure 3).
2. Plug the power adapter into a suitable electrical outlet (refer to Figure 4).
3. The Magic-display (Figure 5) will indicate the charging status. A full charge takes approximately 60 minutes.
4. Once fully charged, the shaver provides approximately 60 minutes of cordless operating time.

Lilo akọkọ

Ensure the shaver is fully charged before its first use. The device can also be used directly from the mains power supply if the battery is discharged, thanks to its direct drive function.

Awọn ilana Iṣiṣẹ

Gbigbe irun

1. Press the power button (located on the front, refer to Figure 1) to turn on the shaver.
2. Move the shaver gently over your skin in circular motions. The precision cutting system with dual-ring shaving heads and 3 spring-mounted shaving heads will adapt optimally to your facial contours for an efficient shave.
3. Fun awọn esi to dara julọ, fa irun lodi si itọsọna ti idagbasoke irun.
4. Lẹ́yìn tí o bá ti fá irun, tẹ bọ́tìnnì agbára lẹ́ẹ̀kan sí i láti pa irun ìfá irun náà.

Lilo Trimmer alaye

1. To activate the detail trimmer, slide it upwards from the back of the shaver (refer to Figure 2).
2. Use the trimmer for precise shaping of sideburns, mustaches, or other facial hair.
3. Once finished, push the trimmer back down until it clicks into place.

Itoju

Ninu awọn Shaver

1. Ensure the shaver is turned off and disconnected from any power source before cleaning.
2. The shaving head unit can be folded open for easy access.
3. Use the included cleaning brush to remove hair residue from the shaving heads and the internal compartment.
4. The shaver head is IPX6 rated, meaning it is protected against strong jet water. You can rinse the shaving head unit under running water for a more thorough clean. Do not immerse the entire shaver in water.
5. Allow the shaver head to air dry completely before closing it or storing the shaver.

Rirọpo abẹfẹlẹ

The Magic-display (Figure 5) includes a reminder for blade replacement to ensure optimal shaving performance. When the blade replacement icon appears, it is recommended to replace the shaving heads. Specific instructions for replacing the blades are typically provided with replacement parts or can be found on the manufacturer's webojula.

Laasigbotitusita

• Shaver ko tan: Ensure the battery is charged. Connect the shaver to the power adapter and check if the power outlet is functional. The shaver can be used directly from the mains if the battery is depleted.
• Dinku iṣẹ-irun: Clean the shaving heads thoroughly as described in the Maintenance section. If performance remains poor, the blades may need replacement. Check the Magic-display for a blade replacement reminder.
• Irun awọ ara lẹhin irun: Ensure the shaver heads are clean. Do not apply excessive pressure while shaving. Avoid using the shaver on skin that is already irritated or inflamed.
• Shaver ko gba agbara: Verify that the charging cable is securely connected to both the shaver and the power adapter, and that the adapter is plugged into a working electrical outlet.

Awọn pato

Atilẹyin ọja ati Support

For warranty information, technical support, or to inquire about replacement parts, please refer to the documentation provided with your purchase. You may also contact the manufacturer, HOYER Handel GmbH, directly for assistance.