1. Ifihan
O ṣeun fun riraasing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.
This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.
2. Alaye Aabo
Jọwọ tẹ̀lé àwọn ìlànà ààbò wọ̀nyí láti dènà ìkọlù iná mànàmáná, iná, tàbí ìbàjẹ́ sí ẹ̀rọ náà:
- Orisun Agbara: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage tọ́ fún agbègbè rẹ.
- Afẹfẹ: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
- Omi ati Ọrinrin: Ma ṣe fi ẹrọ naa han si ojo, ọrinrin, ṣiṣan, tabi sisọ. Ma ṣe gbe awọn nkan ti o kun fun awọn olomi, gẹgẹbi awọn vases, sori ẹyọ.
- Ooru: Maṣe gbe ẹyọ naa si nitosi awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran (pẹlu ampliifiers) ti o gbe ooru jade.
- Awọn nkan ajeji: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
- Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
- Ninu: Unplug the unit from the wall outlet before cleaning. Use a soft, dry cloth only. Do not use liquid or aerosol cleaners.
3. Package Awọn akoonu
Carefully unpack the unit. The carton should contain:
- Audiolab M-ONE Integrated Ampitanna
- AC Power Okun
- Isakoṣo latọna jijin
- Okun USB
- Afowoyi Olumulo (iwe-ipamọ yii)
Ti ohun kan ba nsọnu tabi bajẹ, jọwọ kan si alagbata rẹ lẹsẹkẹsẹ.
4. Ọja Ipariview
4.1 Igbimọ iwaju
olusin 4.1: Iwaju view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.
- Agbekọri Ijade: Jack 6.3mm fun sisopọ awọn agbekọri.
- SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
- Ifihan OLED: Shows current input, volume level, and menu information.
- Bọlu (Iwọn didun) VOL: Rotates to adjust volume level. Press to mute/unmute.
- Bọtini agbara: Press to turn the unit on or off (standby mode).
- M-ONE Indicator: Ina LED ti o nfihan ipo agbara.
4.2 ru Panel
olusin 4.2: Ẹyìn view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).
- Agbara Yi pada: Main power ON/OFF switch.
- Wiwọle Agbara AC: Connects to the supplied AC power cable.
- Awọn ebute Agbọrọsọ: Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
- Awọn igbewọle oni-nọmba:
- COAXIAL: Digital coaxial input.
- Aṣayan: Digital optical (Toslink) input.
- USB B: USB Type B input for connecting to a computer.
- Analog Inputs (AUX): RCA stereo inputs for analog sources.
- 12V nfa: For synchronized power control with other compatible components.
5. Eto
5.1 Ibi
Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.
5.2 Asopọ Agbọrọsọ
Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.
Iṣọra:
- Ensure the M-ONE is powered off before making any speaker connections.
- Do not short-circuit the speaker terminals.
5.3 Source Connection
Connect your audio sources to the appropriate inputs on the rear panel:
- Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
- Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.
5.4 Asopọ agbara
Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.
6. Awọn ilana Iṣiṣẹ
6.1 Agbara Tan / Pa
First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.
6.2 Aṣayan titẹ sii
Yiyi awọn SEL knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the SEL bọtini lati jẹrisi aṣayan rẹ.
6.3 Iṣakoso iwọn didun
Yiyi awọn VOL knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the VOL knob to mute or unmute the audio output.
6.4 Sisopọ Bluetooth
Lati so ẹrọ Bluetooth kan pọ:
- Select the 'BT' input using the SEL knob. The display will show "BT Pairing".
- Lori ẹrọ alagbeka rẹ (foonuiyara, tabulẹti, ati bẹbẹ lọ), mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
- Select "Audiolab M-ONE" from the list of devices.
- Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.
6.5 DAC Functionality
The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.
6.6 Agbekọri o wu
Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.
6.7 Akojọ Lilọ kiri ati Eto
The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the SEL knob to enter the main menu. Use the SEL knob to navigate through options and the VOL knob to change values. Press SEL to confirm or exit a submenu. Available settings may include:
- Awọn Ajọ oni-nọmba: Select different digital filter characteristics for the DAC.
- Ṣe afihan Imọlẹ: Ṣatunṣe imọlẹ ti ifihan OLED.
- Standby Timer: Set a timer for automatic standby.
- Volume on Power On: Configure the initial volume level when the unit powers on.
7. Itọju
To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:
- Ninu: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
- Afẹfẹ: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
- Awọn isopọ: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
- Ibi ipamọ: If storing the unit for an extended period, disconnect it from the power supply and store it in a cool, dry place, preferably in its original packaging.
8. Laasigbotitusita
If you experience issues with your M-ONE, consult the following table before contacting service personnel:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cable not connected; Rear power switch off; Unit in standby. | Check power cable connection; Ensure rear power switch is ON; Press front panel power button. |
| Ko si ohun lati ọdọ awọn agbohunsoke | Incorrect input selected; Volume too low; Speakers not connected; Mute activated; Headphones connected. | Select correct input; Increase volume; Check speaker connections; Press VOL knob to unmute; Disconnect headphones. |
| Ko si ohun lati olokun | Headphones not fully inserted; Volume too low; Mute activated. | Ensure headphones are fully inserted; Increase volume; Press VOL knob to unmute. |
| Bluetooth ko so pọ | M-ONE not in pairing mode; Device too far; Interference. | Select BT input; Ensure M-ONE is discoverable; Move device closer; Reduce interference. |
| Ohun ti o daru | Source signal too high; Speaker impedance mismatch; Damaged cables. | Reduce source volume; Check speaker impedance compatibility; Inspect and replace cables if necessary. |
9. Awọn pato
The following specifications are typical for the Audiolab M-ONE:
- Agbara Ijade: 80 watts per channel (into 8 ohms)
- Awọn igbewọle oni-nọmba: Coaxial, Optical, USB Type B
- Awọn igbewọle Analog: RCA (AX)
- Asopọ Alailowaya: Bluetooth
- DAC: DSD compatible
- Awọn iwọn (L x W x H): 13.7 x 11.5 x 4.4 inches (34.8 x 29.2 x 11.2 cm)
- Ìwúwo: 16.58 iwon (7.52 kg)
- Voltage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
- Olupese: Audiolab
- Nọmba awoṣe: M-ỌKAN
Akiyesi: Awọn alaye ni o wa labẹ iyipada laisi akiyesi.
10. Atilẹyin ọja ati Support
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab webojula fun alaye olubasọrọ.
Webojula: www.audiolab.co.uk
