1. Awọn ilana aabo
Nigbagbogbo ṣe pataki aabo nigbati o nṣiṣẹ awọn irinṣẹ agbara. Ka ati loye gbogbo awọn ikilọ aabo ati awọn ilana ṣaaju lilo.
- Wọ Ohun elo Idaabobo Ti ara ẹni (PPE): Always wear safety glasses, hearing protection, and suitable gloves. A dust mask is recommended for dusty operations.
- Iṣẹ iṣẹ to ni aabo: Rii daju pe iṣẹ naa jẹ iduroṣinṣin ati ni aabo clamped lati ṣe idiwọ gbigbe lakoko iṣẹ.
- Ṣetọju Agbegbe Iṣẹ mimọ: Keep the work area well-lit and free of clutter to prevent accidents.
- Ge Agbara: Always disconnect the angle grinder from the power supply before making any adjustments, changing accessories, or performing maintenance.
- Use Correct Discs: Only use cutting or grinding discs that are rated for the correct speed and diameter (125 mm) for this tool.
- Yago fun Iwaju: Ṣe itọju ẹsẹ to dara ati iwọntunwọnsi ni gbogbo igba.
- Tun Idaabobo bẹrẹ: This tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored. The switch must be manually reset.
2. Ọja Ipariview
Awọn eroja
The Einhell Angle Grinder TC-AG 125/1 is designed for versatility in grinding, smoothing, and rust removal tasks.
Olusin 2.1: Pariview of the Einhell Angle Grinder TC-AG 125/1, showing its compact design with red and black housing, silver gear head, and auxiliary handle.
- Imudani akọkọ: Ergonomically apẹrẹ fun itunu dimu.
- Imudani Iranlọwọ: Can be mounted in two positions for optimal control and ergonomics.
- Titiipa Spindle: Facilitates quick and easy disc changes.
- Disc Guard: Pese aabo nigba isẹ.
- Metal Gear Head: Robust and flat for flexible applications and durability.
- Tan/Pa Yipada: With restart protection feature.
olusin 2.2: Isunmọ view of the angle grinder's main body, highlighting the on/off switch and the robust construction of the gear head.
Nọmba 2.3: Alaye view of the angle grinder's disc attachment area, showing the disc guard and the spindle for mounting cutting or grinding discs.
Key Awọn ẹya ara ẹrọ
- Agbara 800-watt motor fun iṣẹ ṣiṣe to munadoko.
- Maximum speed of 11,000 revolutions per minute.
- Robust, flat metal gear head for flexible applications.
- High user safety thanks to disc protection and restart protection.
- Auxiliary handle can be mounted in two different positions for ergonomic use.
- Spindle lock for easy and convenient tool change.
- Suitable for cutting discs with a diameter of 125 mm.
Apẹrẹ Ergonomic fun mimu itunu.
Features a flat and robust aluminum gear head.
Designed for easy and convenient disc changes.
Compatible with 125 mm diameter cutting discs.
3. Eto
So Imudani Iranlọwọ
- Ensure the angle grinder is unplugged from the power supply.
- The auxiliary handle can be screwed into either of the two threaded holes on the gear head, depending on your preferred working position and hand dominance.
- Mu mimu naa ni aabo nipasẹ ọwọ.
Installing/Changing the Cutting Disc
- Ensure the angle grinder is unplugged from the power supply.
- Tẹ bọtini titiipa spindle ki o si di mu lati ṣe idiwọ fun spindle lati yi pada.
- Using the provided spanner wrench, loosen and remove the clamping nut (if a disc is already installed).
- Fi flange ẹhin sori spindle naa.
- Position the new 125 mm cutting or grinding disc onto the backing flange, ensuring it is centered.
- Dabaru awọn clamping nut back onto the spindle.
- Press the spindle lock button again and tighten the clamping nut firmly with the spanner wrench.
- Release the spindle lock before operating the tool.
4. Awọn ilana Iṣiṣẹ
Titan / Pipa agbara
- Lati Tan: Push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- Lati Pa: For continuous operation, press the rear part of the slide switch to release the lock. For momentary operation, simply release the switch.
- Due to the restart protection, if the power supply is interrupted, the tool will not restart automatically. You must manually reset the switch to the OFF position and then back to ON.
Lilọ ati Ige imuposi
Always ensure proper ventilation and wear appropriate safety gear when operating the angle grinder.
Figure 4.1: A user demonstrating the application of the Einhell Angle Grinder for metal cutting, emphasizing the importance of safety glasses and gloves.
- Lilọ: Hold the angle grinder at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool evenly across the surface.
- Ige: For cutting, hold the angle grinder at a 90-degree angle to the workpiece. Apply light, consistent pressure and allow the disc to do the work. Do not force the tool.
- Spark Direction: Position yourself and the tool so that sparks are directed away from your body and any flammable materials.
- Ikojọpọ: Yẹra fún fífi ohun èlò náà kún ju bó ṣe yẹ lọ. Tí mọ́tò náà bá dínkù gidigidi, dín ìfúnpá kù.
- Itutu: Allow the tool to cool down during prolonged use by running it at no load for a short period.
5. Itọju
Regular maintenance ensures the longevity and safe operation of your angle grinder. Always disconnect the tool from the power supply before any maintenance.
- Ninu: Regularly clean the ventilation slots to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or solvents.
- Disc Guard: Ensure the disc guard is always securely attached and free from damage.
- Awọn Fọlẹ Erogba: Check the carbon brushes periodically. If they are worn down, they should be replaced by a qualified technician.
- Okun Agbara: Ṣe àyẹ̀wò okùn agbára náà fún àmì ìbàjẹ́ èyíkéyìí. Má ṣe lo ohun èlò náà tí okùn náà bá bàjẹ́.
- Ibi ipamọ: Tọ́jú ẹ̀rọ ìfọṣọ igun sí ibi gbígbẹ, tí ó ní ààbò, tí àwọn ọmọdé kò lè tẹ̀ ẹ́ lọ́wọ́.
6. Laasigbotitusita
Abala yii n ṣalaye awọn ọran ti o wọpọ ti o le ba pade pẹlu olutẹ igun rẹ.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Irinṣẹ ko bẹrẹ | No power supply; Restart protection activated; Damaged power cord/switch | Check power connection; Reset switch (OFF then ON); Inspect cord/switch, seek professional repair if damaged. |
| Npa ti o pọju ni motor | Awọn gbọnnu erogba ti a wọ; Idọti commutator | Have carbon brushes checked/replaced; Clean commutator (professional service recommended). |
| Ọpa overheats | Blocked ventilation slots; Overloading; Prolonged use | Clean ventilation slots; Reduce pressure/load; Allow tool to cool down. |
| Disiki ko nyi larọwọto | Spindle lock engaged; Disc improperly installed; Damaged disc | Release spindle lock; Reinstall disc correctly; Replace damaged disc. |
7. Imọ ni pato
| Sipesifikesonu | Iye |
|---|---|
| Awoṣe | TC-AG 125/1 |
| Nọmba apakan | 4430970 |
| Orisun agbara | Okun Itanna |
| Voltage | 220 V |
| Wattage | 800 W |
| Iwọn Disiki | 125 mm |
| Ko si fifuye Iyara | Titi di 11,000 rpm |
| Ọja Mefa | 26.5 x 24.2 x 10.2 cm |
| Iwọn Nkan | 1.72 kg |
| Ohun elo | Irin |
| Ipele Ohun | 44 dB |
8. Atilẹyin ọja ati Support
Einhell products are manufactured with care and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact Einhell customer service or visit the official Einhell website. Keep your proof of purchase handy for any warranty claims.
Einhell UK Webojula: www.einhell.co.uk
