Daytech Wireless Call Alert System User Manual

1. Ọja Ipariview

The Daytech Wireless Call Alert System is designed to provide reliable and convenient communication for caregivers and individuals needing assistance, such as the elderly or those with mobility issues. This system ensures peace of mind by offering a long-range panic button solution.

• Enhanced Independence: Allows individuals to maintain privacy and independence while ensuring help is readily available.
• Ibora ti o gbooro: Features a long range of up to 500+ feet (open area), enabling caregivers to be further away and still receive alerts.
• Apẹrẹ Ọrẹ olumulo: Call buttons are easy to press, even for those with limited hand function, and can be worn around the neck or mounted.
• Awọn Itaniji Iṣatunṣe: Offers 55 different ringtones and 5 adjustable volume levels (0-110 dB, including mute mode) to suit various environments. LED indicators provide visual alerts for the hearing impaired.
• Ikole ti o tọ: Both the call button and receiver are waterproof and dustproof (IP55 rated), made from sturdy ABS material for long-lasting use in various settings, including bathrooms.
• Iṣẹ Iranti: Retains the previously set tune even after battery replacement.

2. Eto ati fifi sori

Figure 2.1: Receiver back panel with battery compartment and mounting options.

2.1 Ni ibẹrẹ Oṣo

1. Fi Awọn batiri sii: Open the battery compartment on the back of the receiver and insert 6 AAA batteries (included). Ensure correct polarity.
2. Activate Call Buttons: Pull out the insulation sheet from the call buttons to activate their internal batteries.

2.2 Pairing Call Buttons with Receiver

The system typically comes pre-paired. If re-pairing is needed or if adding new buttons:

1. Yan Ohun orin ipe: On the receiver, press the "Forward" or "Backward" buttons to cycle through the 55 available ringtones until you find your preferred melody.
2. Tẹ Ipo Sisopọ: Press and hold the "Volume" button on the receiver until it emits a "Ding-Dong" sound and the indicator light begins to flash. This indicates the receiver is in pairing mode.
3. Bọtini Bata: Quickly press the call button you wish to pair. The receiver will make a "Ding-Ding" sound, and its indicator light will flash, confirming successful pairing.
4. Jẹrisi Isopọpọ: Press the call button again to verify that the receiver sounds the selected melody. If it does, pairing is complete.

Figure 2.2: Step-by-step guide for battery installation and pairing.

2.3 Ibi

• Olugba: Place the receiver in a central location where the alert can be easily heard by the caregiver. Consider areas like the living room, kitchen, or caregiver's bedroom.
• Awọn bọtini ipe: The call buttons can be worn around the neck using the included strap or secured to a surface using the provided bracket or double-sided adhesive. Common placement areas include:
  • Ibusun
  • Bathroom (due to waterproof design)
  • Living area
  • Near a wheelchair or frequently used chair

Figure 2.3: Versatile usage scenarios for the Daytech Call Alert System.

3. Awọn ilana Iṣiṣẹ

3.1 Using the Call Button

To request assistance, simply press the large "CALL" button on the caregiver call button. This will send a signal to the receiver, triggering the selected melody and flashing LED indicator.

Figure 3.1: Activating the call button.

3.2 Adjusting Receiver Settings

• Aṣayan ohun orin ipe: Use the "Forward" and "Backward" buttons on the side of the receiver to scroll through the 55 available melodies.
• Iṣakoso iwọn didun: Press the "Volume" button on the side of the receiver to adjust the sound level. There are 5 adjustable volume levels, ranging from 0 dB (mute) to 110 dB.
• Itaniji wiwo: The receiver features an LED light melody indicator that flashes when an alert is received, providing a visual cue in addition to the audio.

Figure 3.2: Receiver features for ringtone and volume adjustment.

4. Itọju

4.1 Ninu

Wipe the surfaces of the receiver and call buttons with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the devices are dry before re-installing batteries or using them.

4.2 Batiri Rirọpo

• Olugba: The receiver requires 6 AAA batteries. Replace all batteries simultaneously when the indicator light dims or the sound becomes weak.
• Awọn bọtini ipe: The call buttons use a 12V (DC) battery. Replace the battery when the button's indicator light does not illuminate or the signal range decreases significantly. Refer to Figure 2.1 for battery compartment access on the receiver.

The system features a memory function, retaining your last selected ringtone even after battery replacement.

5. Laasigbotitusita

• Ko si ohun lati ọdọ olugba:
  • Check if the receiver's volume is set to mute (0 dB). Adjust the volume using the "Volume" button.
  • Rii daju pe awọn batiri ti fi sori ẹrọ daradara ati pe wọn ko dinku. Rọpo ti o ba wulo.
  • Verify that the call button is properly paired with the receiver (refer to Section 2.2).
• Ibi to lopin:
  • Replace batteries in both the call button and receiver.
  • Ensure there are no significant metal objects or thick walls obstructing the signal path between the call button and receiver.
  • Relocate the receiver to a more central position.
• Call Button Not Responding:
  • Check the call button's battery. Replace if needed.
  • Re-pair the call button with the receiver (refer to Section 2.2).

6. Awọn pato

7. Atilẹyin ọja ati Support

Daytech is committed to providing reliable products and excellent customer service. This product comes with a full lifetime warranty and a money-back guarantee.

For any questions, concerns, or support needs, please contact Daytech customer service. We offer round-the-clock support to ensure your peace of mind when caring for your loved ones.

For more information or to contact support, please visit the official Daytech store or refer to the contact information provided with your purchase.

Visit the Daytech Store