Paladone Nintendo Super Mario Bros Lamp Ilana itọnisọna

Ọrọ Iṣaaju

O ṣeun fun riraasing the Paladone Nintendo Super Mario Bros Lamp. Eleyi lamp is designed to bring a retro gaming aesthetic to your space while providing ambient lighting. This manual provides essential information for the safe and proper use of your lamp.

Image: The Paladone Nintendo Super Mario Bros Lamp, featuring a Super Mario level design on the lampshade and an NES controller base.

Awọn ilana iṣeto

Follow these steps to set up your Paladone Nintendo Super Mario Bros Lamp:

1. Yọọ kuro: Carefully remove all components from the packaging. Ensure the lamp, lampshade, and USB cable are present.
2. Ibi: Gbe lamp lori iduro, dada alapin.
3. So agbara: Insert the Micro USB end of the included cable into the port on the NES controller base. Connect the standard USB-A end to a compatible 5V 500mA USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank). Note: A wall adapter is NOT included. Using an incompatible power source may damage the lamp.

Image: Close-up of the NES controller base showing the Micro USB input port and the connected USB cable. Text on the image indicates "60" Micro USB Included. Wall Adapter NOT Included."

Awọn ilana Iṣiṣẹ

Awọn lamp is controlled using the integrated NES controller replica base.

• Agbara Tan: Tẹ awọn Bọtini kan on the NES controller to turn the lamp lori.
• Agbara Pa: Tẹ awọn B bọtini on the NES controller to turn the lamp kuro.
• Ṣàtúnṣe Ìmọ́lẹ̀ (Dídínkù): Lo awọn Paadi Itọnisọna (D-paadi) to cycle through the three available brightness settings. Pressing Up or Isalẹ on the D-Pad will adjust the light intensity.

Image: Diagram of the NES controller indicating that the 'A' button turns the lamp on, the 'B' button turns it off, and the D-Pad dims the light up or down. There are three dimming options.

Fidio Ifihan ọja

Itoju

To ensure the longevity and proper functioning of your lamp:

• Ninu: Pa lamp and controller base with a soft, dry cloth. Do not use abrasive cleaners or liquids, as they may damage the finish or electronic components.
• Ibi ipamọ: Nigbati o ko ba wa ni lilo fun awọn akoko ti o gbooro sii, tọju lamp ni itura, ibi gbigbẹ kuro lati orun taara.
• Awọn LED: Awọn lamp uses integrated LED lighting which is not user-replaceable.

Laasigbotitusita

Ti o ba pade awọn iṣoro pẹlu l rẹamp, wo àwọn ìṣòro àti ojútùú tó wọ́pọ̀ wọ̀nyí:

• Lamp ko tan:
  • Rii daju pe okun USB ti sopọ ni aabo si awọn mejeeji lamp base and the power source.
  • Verify that the USB power source is active and providing 5V 500mA. Try a different USB port or adapter.
  • Press the 'A' button on the controller to turn the lamp lori.
• Lamp is too dim:
  • Use the D-Pad on the controller to cycle through the brightness settings. Ensure it is set to the highest level.
  • Note that this lamp is designed for ambient lighting and may not be suitable as a primary light source for tasks like reading.
• LEDs burn out prematurely:
  • Ensure you are using a 5V 500mA USB charger. Using a charger with higher voltage tabi amperage than specified can damage the internal LEDs.
  • Yago fun kuro lamp on for excessively long periods if not necessary, to prolong LED lifespan.

Awọn pato

Image: The Paladone Nintendo Super Mario Bros Lamp with arrows and measurements indicating its height (31cm / 12.25"), lampshade width (16cm / 6.5"), and base depth (20cm / 8").

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Paladone webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

Paladone Official Webojula: Paladone Store on Amazon