1. Ifihan
The HENDI Automatic Water Softener, Model 230459, is an advanced system designed for commercial use to effectively prevent limescale buildup in plumbing installations. This unit operates at 230V and 18W, ensuring efficient and reliable water treatment. By reducing mineral deposits, it helps extend the lifespan of your appliances and maintain optimal water flow.
olusin 1: Iwaju view of the HENDI Automatic Water Softener, Model 230459.
2. Alaye Aabo
This is a commercial product not intended for domestic use.
Always adhere to local regulations and safety standards during installation, operation, and maintenance. Disconnect power before performing any service or maintenance. Ensure proper grounding to prevent electrical hazards. Keep the unit away from direct sunlight and extreme temperatures.
3. Awọn ẹya Ọja
- Agbara Iṣiṣẹ: 1.5 - 6.0 bar
- Iwọn Iṣiṣẹ Ibaramu: 5 - 38 °C
- Output for 10°dH: 1200 liters
- Ibi iwaju alabujuto: Allows configuration of operating time, regeneration time, and treated water quantity.
- Titii Aifọwọyi: Prevents unauthorized access to settings.
- Titiipa ọmọ: Special function to prevent accidental changes.
4. Eto ati fifi sori
The HENDI Automatic Water Softener is designed for installation on the main water line. It should be installed before the water line splits to the water heater or other plumbing fixtures to ensure all water entering the system is treated.
- Aṣayan Ibi: Choose a dry, level area with adequate space for installation and future access. Ensure the ambient temperature remains within 5 – 38 °C.
- Isopọ Ipese Omi: Connect the unit to the main water supply line. Ensure all connections are secure and leak-free.
- Imugbẹ Asopọ: Connect the drain line according to local plumbing codes.
- Asopọmọra itanna: Connect the unit to a grounded 230V electrical outlet.
- Ibẹrẹ Ibẹrẹ: Follow the operating instructions to initiate the first regeneration cycle and configure settings.
Note on Iron Content: If your source water has iron levels exceeding 0.3 ppm, it is recommended to use an iron removal filter before the water softener to ensure optimal performance and longevity of the unit.
5. Awọn ilana Iṣiṣẹ
The unit features an intuitive control panel for managing its functions. Refer to the display and buttons for configuration.
Figure 2: Close-up of the control panel with display and buttons.
- Setting Operating Time: Use the control panel to set the desired operating schedule for the unit.
- Configuring Regeneration Time: Adjust the regeneration cycle frequency and duration based on your water hardness and usage.
- Adjusting Treated Water Quantity: Set the volume of water to be treated before a regeneration cycle is initiated.
- Titii Aifọwọyi: The system includes an automatic lock feature to prevent unintended changes to the settings. Consult the on-screen prompts for activation/deactivation.
- Titiipa ọmọ: Activate the child lock function through the control panel to secure settings from accidental tampsisun.
6. Itọju
The HENDI Automatic Water Softener Model 230459 is designed for minimal maintenance after initial setup. Regular checks are recommended to ensure optimal performance.
- Ayewo Igbakọọkan: Visually inspect the unit and connections for any signs of leaks or damage.
- Ninu: Jẹ́ kí òde ẹ̀rọ náà mọ́, kí ó sì wà láìsí eruku àti ìdọ̀tí. Lo ohun èlò tó rọ̀, damp Aṣọ fún ìwẹ̀nùmọ́. Má ṣe lo àwọn ohun ìfọṣọ ìfọ́mọ́.
- Ipele Iyọ: This unit operates using an ion exchange method, which typically requires salt for regeneration. Ensure the salt reservoir is adequately filled. Refer to the control panel for indicators and specific instructions on salt replenishment.
7. Laasigbotitusita
If you encounter issues with your HENDI Automatic Water Softener, please refer to the following common troubleshooting steps:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ti ko ni agbara lori | Kò sí ìpèsè agbára; ìsopọ̀ tí ó dẹ́kun | Check power cable and outlet. Ensure unit is properly plugged in. |
| Water still hard | Incorrect settings; low salt level; high iron content; unit malfunction | Verify control panel settings. Check and refill salt reservoir. Test water for iron levels and consider a pre-filter if needed. Contact support if problem persists. |
| Ifiranṣẹ aṣiṣe lori ifihan | Internal fault; sensor issue | Note the error code and consult the full product manual or contact customer support. |
For issues not listed here, or if solutions do not resolve the problem, please contact HENDI customer support.
8. Awọn pato
| Iwa | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Olupese | HENDI |
| Nọmba awoṣe | 230459 |
| Ọja Mefa | 56 x 42 x 24.5 cm (22 x 16.5 x 9.6 inches) |
| Iwọn | 9.94 kg (21.9 lbs) |
| Voltage | 230 Volts |
| Agbara agbara | 18 Wattis |
| Ipa Iṣiṣẹ | 1.5 - 6.0 bar |
| Ibaramu Awọn iwọn otutu Ṣiṣẹ | 5 - 38 °C |
| Oṣuwọn sisan | 5 liters fun iseju |
| Capacity (10°dH) | 1200 liters |
| Ohun elo | Seramiki |
| Ọna fifi sori ẹrọ | Sisun |
| Ọna iwẹnumọ | Pàṣípààrọ̀ Ion |
| Pataki Awọn ẹya ara ẹrọ | Titiipa ọmọ |
9. atilẹyin ọja Information
HENDI products are manufactured to high-quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official HENDI webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.
10. Atilẹyin
For technical assistance, spare parts, or further inquiries regarding your HENDI Automatic Water Softener, please contact HENDI customer service. Contact details can be found on the HENDI webaaye tabi ninu iwe ti a pese pẹlu ọja rẹ.
HENDI Webojula: www.hendi.eu
