1. Ifihan
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Package Awọn akoonu
Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x Itọsọna olumulo
- Iṣagbesori biraketi ati skru
3. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | HOS-401WBT |
| Agbọrọsọ Iru | Ita gbangba / inu ile |
| Ijade agbara | 200 Watts (100W fun agbọrọsọ kọọkan) |
| Iwọn Iwọn Woofer | 4 inches |
| Opin Tweeter | 1 Inṣi |
| Asopọmọra | Bluetooth, Wired (Passive speaker connection) |
| Bluetooth Ibiti | Titi de awọn mita 20.12 (66 ẹsẹ) |
| Omi Resistance Ipele | IP66 (Atako omi) |
| Ohun elo | Acrylonitrile Butadiene Styrene (ABS) |
| Awọn iwọn Ọja (L x W x H) | 8.62" x 5.67" x 6.62" (219mm x 144mm x 159mm) |
| Iṣagbewọle Voltage | 12 Volts |
| Ipo Ijade Ohun | Sitẹrio |
4. Eto
4.1 Iṣagbesori awọn Agbọrọsọ
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- Yọ awọn biraketi kuro: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Samisi Ibi: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Fi sori ẹrọ Awọn akọmọ: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Attach Speakers: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Fífi àwọn Agbọrọsọ sí ara wọn
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Asopọ agbara: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Isẹ
5.1 Sisopọ Bluetooth
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Mu Bluetooth ṣiṣẹ: On your smartphone or tablet, enable Bluetooth.
- Wa fun Ẹrọ: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Sopọ: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Audio Sisisẹsẹhin
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Iṣakoso iwọn didun: Adjust the volume directly from your connected device.
- Didara ohun: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Itọju
- Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ojú agbọ́rọ̀ náà. Yẹra fún àwọn ohun ìfọmọ́ tàbí àwọn ohun èlò ìfọ́mọ́ra.
- Idaabobo oju ojo: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Ibi ipamọ: Ti o ba tọju awọn agbohunsoke fun akoko ti o gbooro sii, ge asopọ wọn lati agbara ati fi wọn pamọ si ibi ti o tutu, ti o gbẹ.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Ohun ti nmu badọgba agbara ko ti sopọ tabi aṣiṣe iṣan. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Ko si ohun | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Asopọ Bluetooth | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Ohun ti o daru | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Atilẹyin ọja ati Support
All Herdio speaker products come with a 1-odun Atilẹyin ọja Limited against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
For questions or support, please contact us at: support@herdiotech.com
