LiftMaster 885LM Security+2.0 Garage Door Wall Control Instruction Manual

Ọrọ Iṣaaju

The LiftMaster 885LM Security+2.0 Garage Door Wall Control is a wireless, user-friendly device designed to operate your garage door opener and its lights. This manual provides essential information for the proper installation, operation, and maintenance of your wall control to ensure optimal performance and safety.

This wall control is compatible with LiftMaster Security+2.0 garage door opener systems.

Image: The LiftMaster 885LM wireless control panel, featuring a large main button and a smaller light button, with the model number 885LM clearly visible.

Eto ati fifi sori

The 885LM wall control features a wireless design, allowing for flexible placement within your garage without the need for complex wiring.

1. Yiyan ipo fifi sori ẹrọ

Select a location within your garage that is easily accessible and provides a clear line of sight to the garage door opener. Ensure the location is out of reach of small children.

Image: The LiftMaster 885LM wall control mounted on a white garage wall, demonstrating its wireless design and flexible placement.

2. Mounting the Wall Control

1. Carefully remove the back cover of the 885LM wall control.
2. Using appropriate screws (not included), secure the back cover to your chosen wall location. Ensure it is mounted securely.
3. Snap the front of the wall control onto the mounted back cover.

3. Programming the Wall Control to Your Opener

The 885LM must be programmed to your Security+2.0 garage door opener. Follow these steps:

1. Locate the "Learn" button on your garage door opener. The color of the learn button may vary (e.g., yellow, purple, red/orange, green). Refer to your garage door opener's manual for its exact location.
2. Press and immediately release the "Learn" button on your garage door opener. The learn indicator light will glow steadily for 30 seconds.
3. Within 30 seconds, press and hold the large push button on your 885LM wall control.
4. Release the button when the garage door opener lights flash or two clicks are heard. This indicates that the wall control has been successfully programmed.
5. Test the wall control by pressing the large button. The garage door should activate.

Image: A close-up of the LiftMaster 885LM wall control, highlighting its compatibility with Security+ 2.0 systems.

Awọn ilana Iṣiṣẹ

The 885LM wall control provides simple and intuitive operation for your garage door and its lighting.

Ṣii ati Tiipa ilẹkun Garage

• To open or close the garage door, press the large push button once. The door will begin to move.
• If the door is in motion, pressing the button again will stop the door. Pressing it a third time will reverse its direction.

Image: A close-up of the LiftMaster 885LM wall control, emphasizing its large, user-friendly push button for garage door operation.

Controlling the Garage Door Opener Lights

• To turn the garage door opener lights ON or OFF independently of the door movement, press the smaller "LIGHT" button.
• The lights will remain on for a preset time (usually 4.5 minutes) or until the "LIGHT" button is pressed again.

Itoju

The LiftMaster 885LM wall control requires minimal maintenance. Regular checks ensure continued reliable operation.

Batiri Rirọpo

The 885LM is powered by a battery (type not specified in product data, but common for wireless controls). If the wall control becomes unresponsive or its range decreases, the battery may need replacement.

1. Carefully remove the front cover of the wall control from its mounted backplate.
2. Wa yara batiri naa.
3. Yọ batiri atijọ kuro ki o si sọ ọ daradara.
4. Fi batiri titun sii, ni idaniloju polarity to pe.
5. Snap the front cover back onto the mounted backplate.
6. Test the wall control to ensure it is functioning correctly.

Ninu

Wipe the surface of the wall control with a soft, dry cloth as needed to remove dust or dirt. Avoid using abrasive cleaners or solvents.

Laasigbotitusita

If you encounter issues with your 885LM wall control, refer to the following common problems and solutions:

Awọn pato

Atilẹyin ọja ati Support

For specific warranty information regarding your LiftMaster 885LM wall control, please refer to the documentation included with your purchase or visit the official LiftMaster website. You can also contact LiftMaster customer support for assistance with product inquiries, troubleshooting, or warranty claims.

Official LiftMaster Webojula: www.liftmaster.com