EDM RGB LED Spotlight 10W 806 Lumen LUMECO Model 70329 User Manual

1. Ifihan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EDM RGB LED Spotlight 10W 806 Lumen LUMECO Model 70329. Please read this manual thoroughly before using the product and retain it for future reference.

The EDM RGB LED Spotlight is designed for various lighting applications, offering multi-color illumination and energy efficiency. It features a robust design suitable for outdoor use (IP65 rated) and comes with a remote control for convenient operation.

2. Awọn ilana aabo

• Aabo Itanna: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation or maintenance.
• Voltage: This spotlight operates on 220 Volts. Verify your power supply matches this requirement.
• Ilẹ: Ensure the spotlight is properly grounded to prevent electrical shock.
• Omi Resistance: The spotlight is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it should not be submerged in water.
• Ooru: Do not cover the spotlight during operation, as this can lead to overheating and damage. Maintain adequate ventilation around the unit.
• Orisun Imọlẹ: Do not stare directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
• Awọn ọmọde: Keep the product and its remote control out of reach of children.

3. Package Awọn akoonu

Jọwọ ṣayẹwo package fun awọn nkan wọnyi:

• 1 x EDM RGB LED Spotlight 10W 806 Lumen LUMECO (Model 70329)
• 1 x Isakoṣo latọna jijin
• 1 x Mounting Bracket (pre-attached)

4. Ọja Ipariview

The EDM RGB LED Spotlight features a durable construction with a glass front and aluminum housing, designed for longevity and efficient heat dissipation. The included remote control allows for easy adjustment of colors and lighting modes.

Nọmba 1: EDM RGB LED Spotlight (Model 70329) shown with its accompanying remote control. The spotlight features a black aluminum housing and a clear glass front, with exposed wiring for connection.

Nọmba 2: EDM RGB LED Spotlight and remote control, highlighting key features such as 10W power, IP65 outdoor rating, 806 lumens brightness, and 21 high-quality LEDs. The remote shows buttons for color selection and lighting modes.

5. Eto

5.1 Mounting the Spotlight

1. Yan Ibi: Select a suitable mounting location that can support the weight of the spotlight and provides the desired illumination angle. Ensure the location is accessible for wiring and maintenance.
2. Biraketi to ni aabo: Use appropriate screws and anchors (not included) to securely fasten the pre-attached mounting bracket to the desired surface.
3. Ṣatunṣe Igun: Loosen the screws on the sides of the mounting bracket to adjust the spotlight's angle. Tighten the screws firmly once the desired angle is achieved.

5.2 Itanna Asopọ

WARNING: Ensure power is OFF at the circuit breaker before proceeding with electrical connections.

1. Ṣe idanimọ Awọn okun: The spotlight comes with three wires: Live (typically brown or black), Neutral (typically blue), and Ground (typically green/yellow).
2. So awọn onirin: Connect the spotlight's wires to your main power supply wires according to standard electrical practices (Live to Live, Neutral to Neutral, Ground to Ground). Use appropriate waterproof connectors for outdoor installations.
3. Isopọmọra idabobo: Ensure all connections are properly insulated and protected from moisture, especially for outdoor use.
4. Pada Agbara pada: Once all connections are secure and insulated, restore power at the circuit breaker.

6. Awọn ilana Iṣiṣẹ

The EDM RGB LED Spotlight is controlled using the included infrared remote control. Ensure the remote control is pointed towards the spotlight's sensor for optimal response.

6.1 Latọna Iṣakoso Awọn iṣẹ

• TAN/PA: Tẹ awọn ON button to turn the spotlight on, and PAA lati pa a.
• Atunse Imọlẹ: Lo awọn Imọlẹ Soke () ati Imọlẹ isalẹ () buttons to increase or decrease the light intensity.
• Aṣayan awọ: Tẹ awọn R (pupa), G (Alawọ ewe), B (Blue), or W (White) buttons for direct color selection. Additional color buttons provide various shades.
• Awọn ọna Yiyi:
  • FILASI: Ni kiakia yiyi nipasẹ awọn awọ.
  • Ija: Flashes a single color on and off.
  • FADE: Awọn iyipada ni irọrun laarin awọn awọ.
  • DẸRẸ: A slower, more gradual transition between colors compared to FADE.

Note: While the product specifications mention 'App' as a control method, the primary control for this model is via the included infrared remote control as depicted in the product images.

7. Itọju

• Ninu: Disconnect power before cleaning. Wipe the spotlight's glass and housing with a soft, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Ayewo: Periodically inspect the power cable and connections for any signs of damage or wear. Ensure the mounting bracket remains secure.
• Awọn LED: The LED light source is designed for long life and is not user-replaceable.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact EDM customer service directly. Keep your purchase receipt as proof of purchase.