1. Ọja Ipariview
The SINOTIMER MC401-611 is a smart LCD display thermostat designed for precise temperature control in various applications. It features a universal input, allowing users to select their desired input signal, and supports both Fahrenheit and Celsius temperature units. The device provides one set of control output, configurable as either relay or SSR (Solid State Relay) integral output. It utilizes a high-quality anti-interference chip for stable performance and offers a clear, concise LCD digital display with a minimum resolution of 0.1°C/0.1°F.
Awọn ẹya pataki:
- Universal input, user can change desired input signal.
- Fahrenheit/Celsius switchable according to user needs.
- One set of control output (relay/SSR integral).
- Thermometer signal input with digital display and decimal point.
- High-quality anti-interference chip for reliable operation.
- Concise and clear LCD display.
olusin 1: Iwaju view of the MC401-611 Thermostat, displaying Process Value (PV) and Set Value (SV) with control buttons below.
2. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | MC401-611 |
| Iṣawọle | K (default setting) |
| Abajade | Relay/SSR |
| Yiye Kilasi | 0.5 |
| Itaniji | ALM 1 |
| Iwọn otutu | Fahrenheit/Celsius switchable |
| Ibi ti ina elekitiriki ti nwa | 100-240V AC 50/60Hz |
| Awọn iwọn otutu ti nṣiṣẹ | 0-1300℃ |
| Awọn iwọn Ọja (L x W x H) | 4.80 x 9.60 x 10.00 cm (1.89 x 3.78 x 3.94 inches) |
| Iwọn Nkan | 0.237 kg (6.9 iwon) |
Figure 2: Product dimensions of the MC401-611 Thermostat.
3. Eto ati fifi sori
3.1 Awọn akoonu idii:
- 1 x MC401-611 Temperature Controller
- 2 x Awọn ẹya ẹrọ iṣagbesori
- Ìwé Ìtọ́sọ́nà Olùlò Gẹ̀ẹ́sì 1 x (ìwé yìí)
Figure 3: Package contents of the MC401-611 Temperature Controller.
3.2 Awọn ilana iṣagbesori:
The MC401-611 is designed for panel mounting. Use the provided mounting accessories to secure the device. Ensure adequate ventilation around the unit.
- Cut a rectangular opening in your panel according to the product dimensions (refer to Figure 2).
- Insert the MC401-611 into the opening from the front.
- Attach the two mounting accessories to the sides of the controller from the rear, tightening the screws to secure the unit firmly in place.
olusin 4: Ẹyìn view of the MC401-611 showing wiring terminals.
olusin 5: Angled ru view showing terminal connections and mounting points.
3.3 Aworan onirin:
Pataki: All wiring should be performed by a qualified electrician and with power disconnected to prevent electric shock. Refer to the diagram on the side of the unit for specific terminal assignments.
The unit supports K-type thermocouple input and offers relay/SSR output. Connect the power supply (100-240V AC 50/60Hz) to the designated terminals. Connect your heating element or control device to the output terminals.
Figure 6: Side label with wiring and specification details.
4. Awọn ilana Iṣiṣẹ
4.1 Ifihan Loriview:
The LCD display shows two main values:
- PV (Iye ilana): The current measured temperature.
- SV (Iye Ṣètò): The desired target temperature.
Figure 7: Close-up of the LCD display showing PV and SV.
Awọn iṣẹ bọtini 4.2:
- SET button: Enters parameter setting mode or confirms a setting.
- R/S (Return/Shift) button: Used to shift digits during setting or return to the main display.
- ▲ (Up) button: Increases the value of a parameter or setpoint.
- ▼ (Down) button: Decreases the value of a parameter or setpoint.
4.3 Setting the Temperature:
- Tẹ awọn SET bọ́tìnì kan lẹ́ẹ̀kan. Ìfihàn SV yóò bẹ̀rẹ̀ sí í tànmọ́lẹ̀.
- Lo awọn ▲ ati ▼ buttons to adjust the desired temperature (SV).
- Lo awọn R/S button to move the cursor between digits if needed.
- Tẹ SET again to confirm the new set value. The display will stop flashing.
4.4 Changing Temperature Unit (Celsius/Fahrenheit):
The unit allows switching between Celsius (℃) and Fahrenheit (℉). Refer to the detailed user manual (101 series manual) included in the package for specific steps on accessing and changing this parameter, as it typically involves entering a deeper parameter menu.
5. Itọju
The MC401-611 Smart LCD Display Thermostat is designed for long-term reliable operation with minimal maintenance.
- Ninu: Gently wipe the display and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic or screen.
- Afẹfẹ: Ensure that the ventilation slots on the sides and rear of the unit are not obstructed to prevent overheating.
- Awọn isopọ: Periodically check wiring connections to ensure they are secure and free from corrosion. Disconnect power before checking connections.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan jẹ òfo. | Ko si ipese agbara. | Check power connections (100-240V AC). Ensure power source is active. |
| PV reading is incorrect or "HHHH" / "LLLL". | Thermocouple not connected, faulty, or incorrect type. | Ensure K-type thermocouple is correctly wired to the input terminals. Check for breaks in the thermocouple wire. |
| Output (heating) not activating. | SV is set too low, wiring issue, or internal fault. | Verify SV is above PV. Check output wiring to the heating element. Consult a qualified technician if issues persist. |
| Unit not responding to button presses. | Ibùgbé software glitch. | Disconnect power for 10 seconds, then reconnect. If problem persists, contact support. |
7. Atilẹyin ọja ati Support
This SINOTIMER MC401-611 Smart LCD Display Thermostat comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact SINOTIMER customer support for details regarding warranty terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact SINOTIMER customer service through their official webaaye tabi alaye olubasọrọ ti a pese pẹlu rira rẹ.
You can visit the official SINOTIMER store on Amazon for more information: SINOTIMER Store
