CORSAIR VENGEANCE LPX DDR4 RAM 16GB (2x8GB) 3600MHz Memory Module

1. Ifihan ati Loriview

The CORSAIR VENGEANCE LPX DDR4 memory is engineered for high-performance computing and overclocking. It features a pure aluminum heatspreader for efficient heat dissipation and a custom performance PCB for enhanced signal quality and overclocking stability. Each memory IC is individually screened to ensure optimal performance potential. This DDR4 form factor is designed for compatibility with the latest Intel and AMD DDR4 motherboards, offering higher frequencies, increased bandwidth, and reduced power consumption compared to DDR3 modules. VENGEANCE LPX DDR4 modules undergo rigorous compatibility testing across various Intel DDR4 motherboards to ensure reliable and fast performance. They are available in multiple colors to complement your system's aesthetic.

Awọn ẹya pataki:

• Hand-sorted memory chips for high performance and overclocking headroom.
• Optimized for wide compatibility with the latest Intel and AMD DDR4 motherboards.
• Low-profile height (34mm) for compatibility with most small-form-factor builds.
• High-performance PCB for strong signal quality and superior overclocking ability.
• Solid aluminum heatspreader for efficient heat dissipation and consistent high clock speeds.
• Supports Intel XMP 2.0 for simplified one-setting installation and setup.

2. Eto ati fifi sori

Installing your CORSAIR VENGEANCE LPX DDR4 RAM modules requires careful handling and adherence to safety procedures. Always consult your motherboard's manual for specific instructions regarding RAM slot population and configuration.

Atokọ iṣaju fifi sori ẹrọ:

• Rí i dájú pé kọ̀ǹpútà rẹ ti pa pátápátá àti pé ó ti yọ ìsopọ̀ mọ́ ibi tí ó wà ní ògiri.
• Discharge any static electricity by touching a grounded metal object (e.g., your PC case).
• Refer to your motherboard manual for the correct DIMM slots to use for dual-channel memory configuration. Typically, these are alternating slots (e.g., slots 2 and 4).

Physical Installation Steps:

1. Locate the DIMM slots on your motherboard.
2. Gently push open the retention clips at both ends of the selected DIMM slots.
3. Align the memory module with the DIMM slot, ensuring the notch on the module matches the key in the slot. Do not force the module.
4. Apply even pressure to both ends of the memory module until it seats firmly into the slot and the retention clips snap into place.
5. Repeat for the second memory module in the appropriate dual-channel slot.

Image: Two CORSAIR VENGEANCE LPX DDR4 RAM modules. These modules are designed for easy installation into compatible motherboard DIMM slots.

BIOS Configuration (XMP 2.0):

To achieve the advertised 3600MHz speed, you may need to enable Intel XMP (Extreme Memory Profile) 2.0 in your motherboard's BIOS. Without XMP, the memory may default to a lower speed (e.g., 2133MHz).

1. After installing the RAM, power on your computer and enter the BIOS/UEFI setup (usually by pressing DEL or F2 during startup).
2. Navigate to the memory or overclocking settings.
3. Look for an option related to XMP, DOCP (for AMD systems), or memory profiles.
4. Enable XMP 2.0 and select the appropriate profile (e.g., Profile 1 tabi Profile 2) that corresponds to 3600MHz.
5. Save your BIOS settings and exit. The system should restart with the memory running at the correct speed.

3. Awọn ilana Iṣiṣẹ

Once installed and configured in the BIOS, your CORSAIR VENGEANCE LPX DDR4 RAM operates automatically. The memory modules will provide the specified speed and capacity to your system, enhancing overall performance for applications, gaming, and multitasking.

Iṣe Ti o dara julọ:

• Ensure your system's cooling is adequate to maintain stable operating temperatures for all components, including RAM.
• For sustained high-frequency operation, consider additional airflow solutions if your system experiences high temperatures.

4. Itọju

CORSAIR VENGEANCE LPX DDR4 RAM modules are designed for durability and require minimal maintenance. However, general computer maintenance practices will help ensure their longevity and optimal performance.

Awọn imọran Itọju Gbogbogbo:

• Keep your computer's interior clean from dust buildup. Dust can impede airflow and lead to higher operating temperatures.
• Use compressed air to gently remove dust from around the memory modules and other components. Ensure the system is powered off and unplugged before cleaning.
• Avoid touching the gold contacts on the memory modules to prevent static discharge or oil transfer, which can affect connectivity.

5. Laasigbotitusita

If you encounter issues after installing your CORSAIR VENGEANCE LPX DDR4 RAM, consider the following troubleshooting steps:

Awọn oran ti o wọpọ ati Awọn ojutu:

• Eto Ko Gbigbe / Ko si Ifihan:
  • Ensure memory modules are fully seated in their slots and retention clips are closed.
  • Rii daju pe awọn modulu ti fi sori ẹrọ ni awọn iho DIMM ti o tọ gẹgẹbi iwe afọwọkọ modaboudu rẹ.
  • Try booting with only one module installed, then swap to the other to identify a potentially faulty module.
  • Clear your motherboard's CMOS (refer to your motherboard manual for instructions).
• Memory Running at Lower Speed (e.g., 2133MHz):
  • Enter your motherboard's BIOS/UEFI setup.
  • Enable XMP 2.0 (or DOCP for AMD) and select the 3600MHz profile.
  • Save and exit the BIOS.
• Aisedeede eto / jamba:
  • Ensure XMP settings are correctly applied and stable. If instability persists, try a slightly lower XMP profile or manually adjust timings/voltage (advanced users only).
  • Ṣiṣẹ́ ohun èlò ìwádìí ìrántí (fún àpẹẹrẹ, Windows Memory Diagnostic tàbí MemTest86) láti ṣàyẹ̀wò fún àṣìṣe.

6. Awọn pato

7. Atilẹyin ọja ati Support

CORSAIR VENGEANCE LPX DDR4 RAM modules come with a limited lifetime warranty, providing peace of mind regarding product quality and reliability.

Olubasọrọ Support:

For technical assistance or warranty claims, please contact Corsair customer support:

• Foonu: 1-888-222-4346 opt # 1
• Visit the official Corsair support webojú òpó wẹ́ẹ̀bù fún àwọn ohun èlò afikún àti àwọn àṣàyàn ìfọwọ́sowọ́pọ̀.