1. Ifihan
Thank you for choosing the Onforu 55W 5000 LM LED Motion Sensor Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your floodlight. Please read these instructions carefully before installation and retain them for future reference.
Iwaju view of the Onforu 3-head LED motion sensor floodlight.
2. Alaye Aabo
- Aabo Itanna: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation or maintenance.
- Ilẹ: This product must be properly grounded to prevent electric shock.
- Voltage: Rii daju pe ipese voltage matches the floodlight's requirements (230 Volts).
- Iṣagbesori: Mount the floodlight securely on a stable surface. Do not install on unstable or vibrating surfaces.
- Iwọn Iṣiṣẹ: Do not operate the floodlight outside its specified temperature range.
- Omi Resistance: The floodlight is IP65 rated, suitable for outdoor use in rain, hail, and snow. However, do not submerge the unit in water. The sensor is IP44 rated.
- Orisun Imọlẹ: Do not stare directly into the LED light source when illuminated, as it may cause eye strain or damage.
3. Ọja Ipariview
The Onforu 55W LED Motion Sensor Floodlight features a robust design with three adjustable heads and an integrated PIR motion sensor. It is designed for outdoor security lighting, providing bright, cool white illumination.
Awọn ẹya pataki:
- Imọlẹ giga: 5000 Lumens output with 120 LED beads.
- Agbara Lilo: 55W power consumption, saving up to 80% energy.
- Awọn ori ti o le ṣatunṣe: Three light heads can be adjusted vertically (90°) and side heads horizontally (270°) for wide coverage.
- Sensọ išipopada (PIR): Detects movement with adjustable sensitivity, lighting duration, and ambient light settings.
- Ti o tọ & Mabomire: IP65 rated aluminum housing and tempered glass for outdoor use.
- Pipade Ooru Mudara: Die-cast aluminum construction ensures extended lifespan.
Internal components showing LED beads and light transmission design.
4. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | Onforu |
| Nọmba awoṣe | BDB55G-3 |
| Agbara agbara | 55 Wattis |
| Flux Imọlẹ | 5000 Lumens |
| Iwọn otutu awọ | 6500 Kelvin (Cool White) |
| Voltage | 230 Volts |
| Ohun elo | Die-cast Aluminum, Tempered Glass |
| Ingress Idaabobo (IP) Rating | IP65 (Floodlight), IP44 (Sensor) |
| Išipopada Sensọ Iwari igun | 180° |
| Ijinna Iwari Sensọ išipopada | 6-12 meters (adjustable) |
| Lighting Duration (TIME) | 10 seconds to 7 minutes (adjustable) |
| Apapọ Igbesi aye | Awọn wakati 50,000 |
| Ọja Mefa | 27.2 x 14.8 x 12 cm |
| Iwọn Nkan | 840 giramu |
| Agbara Agbara Kilasi | F |
EU Energy Label. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/2366865.
5. fifi sori
Before beginning installation, ensure the main power supply is turned off at the circuit breaker to prevent electric shock.
5.1 Iṣagbesori Location
- Choose a mounting location that provides the desired coverage area and is within reach of the electrical wiring.
- The ideal mounting height is between 3 to 5 meters (9.84 ft - 16.4 ft) for optimal motion detection and light distribution.
- Avoid mounting near heat sources or objects that could cause false triggers for the motion sensor.
Ideal mounting height and light coverage.
5.2 Awọn itọnisọna Wiring
The floodlight comes with pre-stripped wires for connection. Follow the standard electrical wiring color codes:
- Waya Brown: Live (L)
- Blue Waya: Àdánù (N)
- Green/Yellow Wire: Ground (⍃)
Connect these wires to your household electrical circuit accordingly. Ensure all connections are secure and insulated. It is recommended to use a waterproof junction box for outdoor connections.
Wiring diagram and product dimensions.
5.3 iṣagbesori Igbesẹ
- Samisi awọn aaye liluho lori ogiri tabi eave ni lilo akọmọ iṣagbesori bi awoṣe.
- Lu awọn ihò ki o si fi awọn plug ogiri ti o yẹ sii (ti o ba jẹ dandan).
- Secure the mounting bracket to the surface with screws.
- Connect the electrical wires as described in Section 5.2.
- Attach the floodlight fixture to the mounting bracket and secure it.
- Adjust the angle of the light heads and the motion sensor to cover the desired areas.
Wall and eave mounting options.
6. Isẹ
The floodlight features a PIR motion sensor with three adjustable settings: TIME, LUX, and SENS.
Motion sensor adjustment knobs for TIME, LUX, and SENS.
6.1 Adjusting Light Heads
The three light heads can be independently adjusted to direct light where needed:
- The central head can be moved vertically up or down (90°).
- The two side heads can be moved vertically up or down (90°) and rotated horizontally left or right (270°).
6.2 Ètò sensọ̀ ìṣípo
Use the three rotary knobs on the motion sensor to configure its behavior:
- TIME (Lighting Duration): Adjusts how long the light stays on after motion is detected. The duration can be set from 10 seconds to 7 minutes. Rotate the knob clockwise to increase the duration and counter-clockwise to decrease it.
- LUX (Ìmọ́lẹ̀ Ayika Ayika): Determines the ambient light level at which the sensor becomes active.
- Rotate towards the 'sun' symbol for 24-hour operation (day and night).
- Rotate towards the 'moon' symbol for night-only operation (activates only in darkness).
- SENS (Detection Sensitivity): Adjusts the motion detection distance. Rotate the knob to increase or decrease the detection range, typically from 6 to 12 meters.
Motion sensor detection range (180°) and distance (6-12m).
6.3 Ohun elo Examples
The floodlight effectively illuminates outdoor areas such as driveways and entrances.
7. Itọju
- Ninu: Periodically clean the floodlight's surface and sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
- Ayewo: Regularly check for any signs of damage to the housing, wiring, or mounting. If damage is found, disconnect power and have it inspected by a qualified technician.
- Ko si Awọn apakan Iṣẹ Olumulo: The LED light source is not replaceable. Do not attempt to open or repair the floodlight yourself.
Robust metal housing with heat sink fins for durability.
Efficient heat dissipation mechanism.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | No power supply; LUX setting too low; Sensor not detecting motion. | Check power connection; Adjust LUX setting towards 'sun' for testing; Verify sensor is aimed correctly and SENS is adequate. |
| Imọlẹ duro nigbagbogbo. | Continuous motion detected; LUX setting too high (always 'sun'); Wiring error. | Check for obstructions or constant movement in detection zone; Adjust LUX setting towards 'moon'; Consult an electrician to check wiring. |
| Imọlẹ tan-an lakoko ọjọ. | LUX setting too high (towards 'sun'). | Adjust LUX setting towards 'moon' to activate only in darkness. |
| Ìmọ́lẹ̀ máa ń pa ní kíákíá/láìpẹ́ẹ́rẹ́. | TIME setting incorrect. | Adjust TIME knob to desired duration (10 seconds to 7 minutes). |
| Ìwọ̀n sensọ̀ ìṣípo ti kúrú jù/gígùn. | Eto SENS ko tọ. | Adjust SENS knob to increase or decrease detection distance. |
| Ina flickers. | Unstable power supply; Loose wiring connection. | Check power source stability; Ensure all wiring connections are tight. |
9. Atilẹyin ọja ati Support
Onforu products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact Onforu customer support.
For technical assistance or inquiries, please contact Onforu customer service through their official webaaye tabi alagbata ti o ti ra ọja naa.
