Nedis DVB-S2 HD Receiver (Model: DVBS2265BK)

1. Ifihan

This manual provides essential information for the safe and efficient operation of your Nedis DVB-S2 HD Receiver, model DVBS2265BK. This device is designed to receive DVB-S/S2 satellite signals and decode MPEG-2/4 H.264 and H.265 video formats, delivering high-definition television broadcasts. Please read this manual thoroughly before use and retain it for future reference.

2. Alaye Aabo

To reduce the risk of electric shock, do not open the receiver. Refer all servicing to qualified service personnel. Observe the following safety precautions:

• Rii daju pe ipese agbara voltage matches the rating label on the adapter.
• Ma ṣe fi olugba han si ojo tabi ọrinrin.
• Avoid placing the receiver near heat sources or in direct sunlight.
• Rii daju pe fentilesonu to peye ni ayika ẹyọ naa. Ma ṣe dina awọn ṣiṣi atẹgun.
• Disconnect the power adapter from the wall outlet during lightning storms or when unused for long periods.
• Ma ṣe lo awọn okun agbara ti o bajẹ tabi awọn pilogi.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ si isalẹ wa ninu package:

• Nedis DVB-S2 HD Receiver (DVBS2265BK)
• Isakoṣo latọna jijin
• Adapter Agbara (12V DC)
• Okùn AV (RCA)
• Afowoyi Olumulo (iwe-ipamọ yii)

Figure 3.1: Contents of the Nedis DVB-S2 HD Receiver package.

4. Ọja Ipariview

4.1 Igbimọ iwaju

Figure 4.1: Front panel of the receiver.

• Ifihan Digital: Ó fi nọ́mbà ikanni tàbí àkókò hàn.
• CH- / CH+: Buttons to change channels.
• AGBARA: Button to turn the receiver on/off or to standby mode.

4.2 ru Panel

Figure 4.2: Rear panel of the receiver.

• LNB-IN: Ó so mọ́ àwo satẹlaiti LNB.
• USB: Two USB ports for media playback or Wi-Fi adapter.
• HD-OUT: HDMI output for connecting to a TV or monitor.
• TI: Analog audio/video output (RCA).
• RS-232: Serial port for service or firmware updates.
• Àjọlò: Ibudo RJ45 fun asopọ nẹtiwọọki.
• DC 12V-IN: Power input for the 12V DC adapter.

4.3 Iṣakoso latọna jijin

The remote control allows you to operate all functions of the receiver. Insert two AAA batteries (not included) into the battery compartment, observing polarity.

Awọn iṣẹ bọtini pẹlu:

• AGBARA: Turns the receiver on/off or to standby.
• DÁKÚN: Mutes or restores audio.
• 0-9: Awọn bọtini nọmba fun yiyan ikanni taara.
• CH+/CH-: Yipada awọn ikanni soke tabi isalẹ.
• VOL+/VOL-: Ṣatunṣe iwọn didun.
• Akojọ: Wọle si akojọ aṣayan akọkọ.
• O DARA: Jẹrisi awọn aṣayan.
• JADE: Ti jade kuro ninu akojọ aṣayan lọwọlọwọ tabi iboju.
• ALAYE: Displays channel information.
• EPG: Itanna Eto Itọsọna.
• Gba: Starts recording (requires USB storage).
• FAV: Accesses favorite channel list.
• OHUN: Selects audio track.
• Ọrọ: Teletext iṣẹ.
• Akojọ: Displays channel list.

5. Eto

Follow these steps to set up your Nedis DVB-S2 HD Receiver:

1. Sopọ si TV:

   For best picture quality, connect an HDMI cable (not included) from the receiver's HD-Jade port to an HDMI input on your television. Alternatively, use the supplied AV cable to connect the receiver's AV ports to the corresponding AV inputs on your TV.
2. Sopọ mọ Satẹlaiti Satẹlaiti:

   Connect the coaxial cable from your satellite dish LNB to the LNB-IN ibudo lori ru ti awọn olugba.

3. So agbara:

   Connect the supplied 12V DC power adapter to the DC 12V-IN ibudo lori olugba, ki o si pulọọgi ohun ti nmu badọgba sinu kan odi iṣan.

4. Ṣiṣayẹwo akọkọ:

   Turn on your TV and select the correct HDMI or AV input. Power on the receiver using the front panel button or remote control. The receiver will likely guide you through an initial setup wizard. Follow the on-screen instructions to select your language, country, and perform a channel scan to find available satellite channels.
5. Wi-Fi Connection (Optional):

   If you wish to use Wi-Fi features, connect a compatible USB Wi-Fi adapter (not included) to one of the USB ports. Navigate to the network settings in the receiver's menu to configure your Wi-Fi connection.

6. Awọn ilana Iṣiṣẹ

Once setup is complete, you can begin using your receiver:

• Titan/Apapa: Tẹ awọn AGBARA button on the remote or front panel.
• Aṣayan ikanni: Lo awọn + + CH awọn bọtini tabi tẹ nọmba ikanni taara nipa lilo bọtini itẹwe nọmba.
• Atunse iwọn didun: Lo awọn VOL + / VOL- awọn bọtini.
• Akojọ akọkọ: Tẹ awọn Akojọ button to access settings, channel management, media player, and other features. Use the arrow keys to navigate and OK lati jẹrisi.
• Itọsọna Eto Itanna (EPG): Tẹ EPG si view awọn iṣeto eto.
• Sisisẹsẹhin Media: Insert a USB storage device into a USB port. Navigate to the media player section in the menu to play supported audio (Dolby Digital, DTS, AAC, MP3, PCM) and video files.
• Gbigbasilẹ: With a USB storage device connected, press REC to start recording the current program.

7. Itọju

Itọju to peye ṣe idaniloju gigun aye olugba rẹ:

• Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta olugba náà. Má ṣe lo àwọn ohun èlò ìfọmọ́ omi tàbí àwọn ohun èlò ìpara.
• Afẹfẹ: Keep the ventilation openings clear of dust and obstructions to prevent overheating.
• Ibi ipamọ: If storing the receiver for an extended period, disconnect it from power and store it in a cool, dry place.

8. Laasigbotitusita

9. Awọn pato

10. Atilẹyin ọja ati Support

Nedis products are manufactured to high quality standards and are covered by a warranty period as specified in the terms and conditions of sale. This warranty does not cover damage caused by improper use, negligence, or unauthorized modifications.

For technical support or warranty claims, please contact your retailer or the Nedis customer service department. Contact information can typically be found on the Nedis webaaye tabi apoti ọja.