1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your Lockly Secure Plus Bluetooth Smart Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and security.
Image 1.1: The Lockly Secure Plus Smart Door Lock shown with its accompanying smartphone application interface.
2. Eto ati fifi sori
2.1 Package Awọn akoonu
Jẹrisi pe gbogbo awọn paati wa ninu package rẹ:
- Smart Lock Assembly (Exterior and Interior)
- 4 x AA batiri
- 2 x Backup Keys
- Installation Hardware (screws, strike plate, etc.)
- Installation Guide/Template
2.2 Ibamu ilekun
Ṣaaju fifi sori ẹrọ, rii daju pe ilẹkun rẹ pade awọn alaye wọnyi:
- Door Thickness: 1 3/8" to 2" (35mm to 50mm)
- Backset: 2 3/8" or 2 3/4" (60mm or 70mm)
- Cross Bore Diameter: 2 1/8" (54mm)
- Edge Bore Diameter: 1" (25mm)
Image 2.1: Diagram illustrating the required door measurements for proper installation of the Lockly Secure Plus.
2.3 fifi sori Igbesẹ
Follow the detailed instructions provided in the separate installation guide. A video introduction for installation is also available. Key steps include:
- Prepare the door and frame according to the template.
- Install the latch and strike plate.
- Fi sori ẹrọ ni ita ijọ.
- Fi sori ẹrọ apejọ inu.
- So okun pọ.
- Install the batteries (4 x AA batteries are included).
- Perform door handing and initial setup.
3. Awọn ilana Iṣiṣẹ
The Lockly Secure Plus offers multiple methods for unlocking and managing access.
3.1 Awọn ọna ṣiṣi silẹ
- Bọtini PIN Genie Digital: Enter your secure PIN on the dynamic keypad. The numbers on the keypad shuffle after each use to prevent code guessing.
- Sensọ Ìtẹ̀wé Ìka 3D: Place your registered finger on the sensor for quick access. The sensor recognizes fingerprints in approximately 0.3 seconds. Up to 99 fingerprints can be stored.
- Iṣakoso Ohun elo Titiipa: Use the Lockly smartphone application to remotely lock and unlock your door.
- Iṣakoso ohun: With the optional Lockly Secure Link Wi-Fi Hub, you can use Amazon Alexa or Google Assistant-enabled devices to control your lock.
- Bọtini ti ara: Use the provided physical keys as a backup unlocking method.
- Àwọn Kóòdù Ìwọ̀lé Àìsíṣẹ́ (OAC): Generate temporary access codes that can be used without an internet connection.
Aworan 3.1: Pariview of the various unlocking methods available for the Lockly Secure Plus smart lock.
3.2 PIN Genie Digital Keypad
The patented PIN Genie keypad features four virtual buttons, each containing three different numbers. The position of these numbers changes after every use, making it difficult for onlookers to guess your PIN.
Image 3.2: The PIN Genie keypad demonstrating the dynamic shuffling of digits for enhanced security.
Sensọ Ìtẹ̀wé Ìka Onímọ̀-ẹ̀rọ 3D 3.3
The 3D biometric fingerprint sensor allows for quick and secure access. It features self-learning AI to improve recognition over time and can store up to 99 unique fingerprints.
Image 3.3: A user unlocking the Lockly Secure Plus using the integrated 3D biometric fingerprint sensor.
3.4 Lockly Mobile Application
The Lockly App provides comprehensive control and monitoring features:
- Remote lock and unlock functionality.
- Àwọn ìfitónilétí àkókò gidi fún ìgbòkègbodò ìdènà.
- Access history logs.
- Management of eKeys and eBadges for granting revocable access.
- Generation of Offline Access Codes.
Image 3.4: The Lockly mobile application showing the access history and control options.
3.5 Titiipa Aifọwọyi ti a le ṣeto
The auto-lock feature can be customized to automatically lock the door after a set period (5 to 300 seconds) following an unlock event.
Image 3.5: The Lockly app interface for configuring the programmable auto-lock feature.
3.6 Voice Control (Optional Wi-Fi Hub Required)
To enable voice control with Amazon Alexa or Google Assistant, the optional Lockly Secure Link Wi-Fi Hub is required. Once installed and configured, enable the Lockly Action/Skill in your voice assistant app to use voice commands for locking, unlocking, and checking door status.
Image 3.6: A user interacting with a voice assistant to control the Lockly smart lock, with the optional Wi-Fi Hub.
3.7 Kaabo Ipo
The Welcome Mode feature allows you to preset your door to be unlocked during specific times, useful for expecting guests or service personnel. This mode can be configured with recurring schedules and first unlock verification.
Image 3.7: The Lockly app interface for setting up and managing Welcome Mode.
4. Itọju
4.1 batiri Management
The Lockly Secure Plus operates on 4 AA alkaline batteries, providing up to 12 months of battery life. The Lockly app will provide low battery alerts. In case of complete battery depletion, a 9V battery can be used for emergency power supply via the contacts on the exterior unit.
Image 4.1: Illustration of the battery compartment and 9V emergency power supply contacts.
4.2 Ninu
To maintain the appearance and functionality of your smart lock, wipe the exterior surfaces with a soft, damp asọ. Yago fun lilo abrasive ose tabi olomi, bi awọn wọnyi le ba ipari ati ẹrọ itanna irinše.
5. Laasigbotitusita
This section addresses common issues you might encounter with your Lockly Secure Plus.
- Titiipa ko dahun: Check battery levels. If batteries are low, replace them or use the 9V emergency power.
- PIN Genie keypad not lighting up: Ensure the lock has power. If the issue persists, contact customer support.
- Fingerprint sensor not recognizing: Rí i dájú pé ìka rẹ mọ́ tónítóní tí ó sì gbẹ. Tún ṣe ìforúkọsílẹ̀ ìka rẹ tí ìṣòro ìdámọ̀ bá ń bá a lọ.
- Awọn oran Asopọmọra App: Ensure your smartphone's Bluetooth is enabled and you are within range. If using the Wi-Fi Hub, check its power and internet connection.
- Titiipa alaifọwọyi ko kopa: Verify the auto-lock settings in the Lockly app. Ensure the door is fully closed.
For more complex issues, refer to the online support resources or contact Lockly customer service.
6. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Titiipa |
| Orukọ awoṣe | Lockly Secure Plus |
| Nọmba Awoṣe Nkan | PGD628F |
| UPC | 850003895116 |
| Titiipa Iru | Smart Titii |
| Pataki Awọn ẹya ara ẹrọ | Biometric, Touchscreen, Patented PIN Genie Technology, Bluetooth, Smartphone, eKeys & eBadges, Offline Access Codes™ |
| Ohun elo | Sinkii Alloy |
| Àwọ̀ | Matte Black |
| Pari Iru | Matte Black |
| Awọn Iwọn Nkan (L x W x H) | 7.8 x 2.9 x 7.2 inches |
| Iwọn Nkan | 6.48 iwon |
| Orisun agbara | Batiri AA Alkaline 4 x (pẹlu rẹ̀) |
| Ilana Asopọmọra | Bluetooth |
| Adarí Iru | Amazon Alexa, iOS (with optional Wi-Fi Hub) |
| Awọn irinše to wa | Smart Lock, 4*AA Battery, 2 Backup keys |
| Resistance Oju ojo | IP54 Weatherproof |
| Idanwo Agbara | 72 Hours Salt Spray Test, 2,200 N Appearance Pressure Resistance, 250,000 cycles Latchbolt Test |
7. Atilẹyin ọja ati Support
7.1 Atilẹyin ọja
The Lockly Secure Plus comes with a 2-year limited warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
7.2 Onibara Support
Lockly provides professional customer service and lifetime 24/7 technical support. If you have any questions, require assistance with installation, or need troubleshooting help, please contact us via phone, email, or online chat.
Image 7.1: Lockly offers lifetime 24/7 customer support for all its products.
