Pipishell Full Motion TV Monitor Wall Mount Instruction Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Monitor Wall Mount. Designed for optimal viewing flexibility, this mount supports 13-42 inch LED LCD flat and curved screen TVs and monitors weighing up to 44 lbs, with VESA mounting patterns up to 200x200mm. Its full motion capabilities allow for tilting, swiveling, extension, and rotation, enhancing your viewing experience and saving space.

Figure 1: Pipishell Full Motion TV Monitor Wall Mount Bracket.

Alaye Aabo

Please read all instructions carefully before installation. Incorrect installation may result in property damage or personal injury. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service.

• Rii daju pe ipele iṣagbesori le ṣe atilẹyin lailewu iwuwo apapọ ti oke ati ifihan.
• Do not mount on drywall alone. This mount requires installation into a single wood stud, solid concrete, or brick wall.
• Use all provided hardware. Do not use the concrete anchors for drywall installation.
• Always have at least two people for installation, especially when lifting the display.
• Pa awọn ọmọde ati awọn ohun ọsin kuro lakoko fifi sori ẹrọ.
• Ṣayẹwo gbogbo awọn asopọ lorekore lati rii daju pe wọn wa ni aabo.

Figure 2: Illustration of compatible wall types for mounting: single wood stud, solid concrete, and brick wall. A crucial warning indicates that the mount should not be installed on drywall alone.

Package Awọn akoonu

Before beginning installation, verify that all parts are present and undamaged. If any parts are missing or defective, contact Pipishell customer service.

Figure 3: All components included in the package: the wall plate, TV brackets, instruction manual, and various bags of screws, spacers, and anchors for different installation needs.

• Wall Apejọ
• Àwọn Báàkẹ́ẹ̀tì Tẹlifíṣọ̀n (x4)
• Ilana itọnisọna
• Assorted Screws, Washers, and Spacers for TV/Monitor attachment
• Lag Screws and Concrete Anchors for wall mounting
• Allen Wrenches

Awọn pato

Figure 4: Detailed VESA mounting patterns supported by the mount, including 100x100mm, 75x75mm, 100x200mm, 200x100mm, and 200x200mm, along with screen size and max load capacity.

Eto ati fifi sori

This section guides you through the process of securely mounting your TV or monitor. It is recommended to have assistance during installation.

1. Ṣayẹwo Ibamu

Before starting, ensure your TV or monitor meets the following criteria:

• Iwọn iboju: Laarin 13 ati 42 inches.
• Ìwúwo: Titi di 44 lbs (20 kg).
• Ilana VESA: Compatible with 75x75mm, 100x100mm, 100x200mm, 200x100mm, and 200x200mm.

2. Yan Iru Odi Rẹ

This mount is designed for installation on:

• Single Wood Stud
• Solid Concrete Wall
• Odi biriki

3. Installation Steps (Single-Stud Example)

The following steps outline a typical single-stud installation. Refer to the included instruction manual for detailed steps for all wall types.

1. Step 1: Mount Wall Plate. Position the wall plate on your chosen wall location, ensuring it is level and aligned with a wood stud. Mark and drill pilot holes, then secure the wall plate using the appropriate lag screws.
2. Step 2: Attach TV Brackets. Secure the TV brackets to the back of your TV or monitor using the correct screws and spacers from the hardware kit, matching your display's VESA pattern.
3. Step 3: Hang TV. Carefully lift the TV with the attached brackets and hook them onto the wall plate assembly. Ensure the TV is securely seated and locked into place.

Figure 5: Visual guide for the three main steps of single-stud installation: mounting the wall plate, attaching TV brackets, and hanging the TV onto the mount.

Awọn ilana Iṣiṣẹ

Your Pipishell Full Motion TV Mount offers various adjustments for optimal viewing awọn igun.

• Atunṣe tẹlọrun: The mount allows for a tilt range of +9° (upward) to -11° (downward) to reduce glare and achieve a comfortable viewing angle. Loosen the tilt bolts, adjust to the desired angle, and then re-tighten securely.
• Atunṣe Swivel: Swivel your display up to 90° left or right, depending on your screen size, to direct the screen towards your seating position. Gently push or pull the display to the desired angle.
• Itẹsiwaju ati ifẹhinti: Extend the TV up to 14.59 inches from the wall for closer viewing or retract it back to 2.7 inches to save space when not in use.
• Yiyi: Rotate the screen 360° to switch between landscape and portrait orientation. This feature is particularly useful for computer monitors.

Figure 6: Demonstrates the 360-degree rotation feature for changing screen orientation and the ±90-degree swivel capability for flexible viewing awọn igun.

Figure 7: Illustrates the tilt function (+9°/-11°) to reduce glare and the extension/retraction feature (extends 14.59", retracts 2.7") for space-saving.

Itoju

Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti oke TV rẹ.

• Ninu: Fi aṣọ rírọrùn, gbígbẹ, nu ibi tí a gbé e sí. Yẹra fún àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ tí ó lè ba ìparí rẹ̀ jẹ́.
• Ṣayẹwo Awọn isopọ: Periodically (e.g., every 6 months) check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
• Lubrication: If the articulating arm or swivel points become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

Laasigbotitusita

If you encounter any issues with your Pipishell TV mount, refer to the common problems and solutions below.

• Mount feels wobbly after installation:
  • Ensure the mount is installed into a solid structural support (wood stud, concrete, or brick), not just drywall.
  • Verify all lag screws securing the wall plate to the wall are fully tightened.
  • Check that the TV brackets are securely attached to the TV and properly hooked onto the wall plate.
• Difficulty adjusting tilt or swivel:
  • For tilt adjustment, ensure the tilt bolts on the TV plate are loosened before attempting to adjust, and re-tighten them afterward.
  • For swivel, ensure no cables are snagged or restricting movement.
  • If movement is stiff, apply a small amount of silicone lubricant to the pivot points.
• TV kii ṣe ipele:
  • Check the level of the wall plate during installation. Minor adjustments can often be made by slightly loosening and re-tightening the screws on the TV brackets where they attach to the mount.
• Awọn ẹya ti o padanu:
  • Refer to the "Package Contents" section and contact Pipishell customer service immediately for replacement parts.

Atilẹyin ọja ati Support

Pipishell stands behind the quality of its products. This TV wall mount is constructed from high-quality steel materials.

• Atilẹyin ọja: We provide a 5-year friendly customer service for this product.
• Iṣẹ onibara: If you have any questions, concerns, or require assistance with your product, please feel free to contact us anytime. Refer to the contact information provided in the original product packaging or on the Pipishell official webojula fun support.