Alaye Aabo pataki
Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Idaabobo Oju: Always wear safety glasses when working with batteries.
- Afẹfẹ: Ensure adequate ventilation when charging or jump starting.
- Jeki Gbẹgbẹ: Má ṣe fi fóònù tó ń rọ̀ sílẹ̀ fún òjò tàbí òjò.
- Awọn ọmọde: Jeki kuro ni arọwọto awọn ọmọde.
- Sparks: Avoid creating sparks near the battery. Battery gases are explosive.
- Polarity: Connect the jumper cables correctly to the battery terminals (red to positive, black to negative). Incorrect connection can cause damage or injury.
- Ẹ̀yà tí ó bàjẹ́: Do not operate the jump starter if it is damaged.
- Iwọn otutu: Do not store or operate in extreme temperatures.
Ọja Pariview
Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ninu apo rẹ:
- DBPOWER DJS80 Portable Car Jump Starter
- Smart Jumper Cables with LCD Screen
- USB-C Ngba agbara Cable
- Itọsọna olumulo
- Ọran ipamọ
Image: The complete package contents of the DBPOWER DJS80 Portable Car Jump Starter.
Ọja Awọn ẹya ara ẹrọ ati irinše
Familiarize yourself with the main components of your jump starter:
Image: Labeled components of the DBPOWER DJS80 Jump Starter.
- 12V Jumping Port: Connects to the smart jumper cables for vehicle jump starting.
- Power Button & Function Key: Turns the unit on/off and cycles through flashlight modes.
- Awọn imọlẹ Atọka LED: Display the battery charge level and operational status.
- USB Output Ports (5V/1.0A, 5V/2.1A): Used for charging electronic devices like smartphones and tablets.
- USB Input Port (5V/2.0A): For recharging the jump starter unit.
- Ina filaṣi LED: Provides illumination with High, Strobe, and SOS modes for emergencies.
Gbigba agbara si Jump Starter
Ibere idiyele
Before first use, fully charge the jump starter. This ensures optimal performance and battery longevity.
Ngba agbara si Unit
- Connect the provided USB-C charging cable to the jump starter's input port.
- Connect the other end of the USB-C cable to a 5V/2A USB wall adapter (not included) or a car charger.
- The LED indicator lights will illuminate and flash to show the charging progress. All four lights will be solid when fully charged.
- A full charge typically takes approximately 3 hours with a QC3.0 compatible charger.
Image: The jump starter connected to a charger, illustrating the charging process.
Awọn ilana iṣiṣẹ: Fò Bibẹrẹ Ọkọ ayọkẹlẹ kan
Ṣaaju ki O Bẹrẹ
- Ensure the jump starter is at least 75% charged (three LED indicators lit).
- Turn off your vehicle's ignition and all accessories (lights, radio, air conditioning).
- Confirm your vehicle's engine size is compatible: up to 7.0L for gas engines or 5.5L for diesel engines.
Igbese-nipasẹ-Igbese Itọsọna
- Insert the smart jumper cable plug into the 12V jumping port on the jump starter. Ensure a firm connection.
- Sopọ awọn pupa (+) clamp sí ibi tí ọkọ̀ náà ti ń lo batiri tó dára (+).
- Sopọ awọn dúdú (-) clamp sí ibi tí ọkọ̀ náà ti ń lo batiri òdì (-).
- Once connected, the LCD screen on the smart clamps will display the vehicle battery voltage. If the connection is correct, the indicator light on the smart clamp will turn solid green. If it flashes red or displays an error, check the connections.
- Bẹ̀rẹ̀ ẹ̀rọ ọkọ̀ rẹ.
- Once the engine starts, immediately remove the black (-) clamp from the vehicle's negative terminal.
- Then, remove the red (+) clamp from the vehicle's positive terminal.
- Disconnect the smart jumper cable plug from the jump starter.
Image: Demonstrating the connection of the jump starter to a car battery.
Iṣọra: Do not crank the engine for more than 3 seconds. If the engine does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive starts.
Operating Instructions: Using as a Power Bank
Gbigba agbara Awọn ẹrọ itanna
The DBPOWER DJS80 can charge various electronic devices using its USB output ports.
- Connect your device's USB charging cable to one of the jump starter's USB output ports (5V/1.0A or 5V/2.1A).
- Ibẹrẹ fo yoo bẹrẹ laifọwọyi gbigba agbara ẹrọ rẹ.
- The 18000mAh capacity allows for multiple charges of smartphones, tablets, and other USB-powered gadgets.
Aworan: Ibẹrẹ fo n ṣiṣẹ bi banki agbara, gbigba agbara awọn ẹrọ lọpọlọpọ.
Operating Instructions: LED Flashlight
Muu ṣiṣẹ Flashlight
The integrated LED flashlight offers three modes for various situations:
- Press and hold the Power Button for 3 seconds to turn on the flashlight in High mode.
- Press the Power Button once to switch to Strobe mode.
- Press the Power Button again to switch to SOS mode.
- Press and hold the Power Button for 3 seconds to turn off the flashlight.
Image: The jump starter's LED flashlight providing illumination.
Itọju ati Ibi ipamọ
Gbogbogbo Itọju
- Fi aṣọ gbígbẹ tí ó rọ, fọ ẹ̀rọ náà. Má ṣe lo àwọn kẹ́míkà líle tàbí àwọn ohun èlò ìpalára.
- Pa awọn ibudo mọ kuro ninu eruku ati idoti.
- Yago fun sisọ ẹyọ naa silẹ tabi fifisilẹ si awọn ipa to lagbara.
Ibi ipamọ
- Store the jump starter in its protective case in a cool, dry place.
- For long-term storage, ensure the unit is charged to approximately 50-75% (2-3 LED indicators).
- Recharge the unit every 3-6 months to maintain battery health, even if not in use.
Laasigbotitusita
Tọkasi tabili ni isalẹ fun awọn ọran ti o wọpọ ati awọn ojutu wọn:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ọkọ ayọkẹlẹ ko bẹrẹ | Jump starter battery is low | Recharge the jump starter fully. |
| Ọkọ ayọkẹlẹ ko bẹrẹ | Jumper cables not connected correctly | Rii daju clamps are firmly attached to the correct battery terminals (red to +, black to -). Check smart clamp indicator light for solid green. |
| Ọkọ ayọkẹlẹ ko bẹrẹ | Vehicle battery is severely discharged or damaged | Attempt to start again after 30 seconds. If still unsuccessful, the vehicle battery may require professional service. |
| Smart clamp indicator flashes red or shows error | Incorrect connection or short circuit detected | Ge asopọ clamps, check for proper polarity and secure connection, then re-attach. |
| Jump starter not charging | Charging cable or adapter issue | Try a different USB-C cable or a different 5V/2A USB wall adapter. Ensure the cable is fully inserted. |
| USB devices not charging | Jump starter battery is low or unit is off | Check jump starter battery level. Ensure the unit is powered on. |
Awọn pato
Imọ Data
| Ẹya ara ẹrọ | Iye |
|---|---|
| Awoṣe | DJS80 |
| Oke Lọwọlọwọ | 1000 Amps |
| Agbara Batiri | 18000mAh / 47.36Wh |
| Gas Engine Compatibility | Titi di 7.0 liters |
| Diesel Engine Compatibility | Titi di 5.5 liters |
| Ṣiṣejade USB 1 | 5V/1.0A |
| Ṣiṣejade USB 2 | 5V/2.1A |
| Input USB | 5V/2.0A |
| Awọn iwọn (L x W x H) | 5.75" x 3.62" x 1.38" |
| Iwọn Nkan | 13.6 iwon |
| Awọn iwọn otutu ti nṣiṣẹ | -4°F si 140°F (-20°C si 60°C) |
Image: Physical dimensions of the jump starter unit.
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
DBPOWER provides an 18-month customer service period for this product. Please retain your proof of purchase for warranty claims.
Olubasọrọ Support
For technical assistance, warranty inquiries, or other support needs, please refer to the contact information provided on the DBPOWER official webojula tabi rẹ ra Syeed.
